A Groundwork company - serving Burbank, CA
A living room with a wall of new windows and a sliding glass door

Custom & Geometric Windows in Burbank, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Burbank
A new bay window with a cushioned seat
A new casement window over a kitchen sink
New painted shaker cabinets with an organized deep drawer
A remodeled hall bathroom with patterned floor tile and painted walls
A remodeled kitchen with a waterfall island and wood cabinets
A wood double vanity with two mirrors after a bathroom remodel
A finished backyard cottage with a small covered porch
A new roof with clean valleys and new flashing
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate
Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Custom & Geometric Windows in Burbank, CA

Custom and geometric windows are made-to-measure units built to a non-standard shape or size: arches, half-rounds, eyebrows, trapezoids, triangles, circles, ovals, angled corner windows and full walls of glass. They’re the windows that let a Tudor gable, a Spanish Colonial arch or a modern hillside home read the way the architect drew it, and no stock window will fit those openings without a custom build. In Burbank, that means everything from a half-round over a front door on a 1920s bungalow near Magnolia Park to a 14-foot mitered corner in a new hillside build up in the Verdugo foothills. If you’re weighing options, call us at (844) 797-7958 and a live person picks up around the clock.

We handle this work as part of our broader Windows & Doors service, which means the framing, flashing, trim and finish all come from one accountable contractor instead of a window dealer and a separate installer pointing at each other when something’s off. Custom geometry is unforgiving. One wrong radius or a template measured on a slope instead of a square, and the unit arrives wrong or the glass cracks on install. Our technicians have up to 12 years of experience measuring and setting custom units, and every project is backed by our 730-Day Done Right Promise: if it’s not done right, we make it right.

We’ve been in business since 2014 and serve homeowners across our markets, and Burbank is one of the most interesting window towns we work in because the housing stock is so varied. You have pre-war bungalows and Spanish Revival homes on the flat, mid-century ranches up toward the hills, and newer custom builds where the whole point is a dramatic geometric feature. Each one demands a different approach to measuring, templating and flashing. That variety is exactly why we don’t treat custom windows as a catalog order.

Key Takeaways

  • Custom and geometric windows are built to spec, so accurate templating and squaring the opening matter more than the glass itself.
  • Burbank’s mix of pre-war, mid-century and modern homes means arched and angled openings are common, not rare.
  • Expect longer lead times than stock windows because each unit is fabricated after measurement.
  • Proper flashing and water management at shaped openings is where most failures happen, and where our 730-Day Done Right Promise matters most.
  • We quote upfront, offer 0% financing for 18 months, and take $1,000 off projects over $10,000.
A new front entry door with glass sidelights

When You Need Custom & Geometric Windows

Most homeowners don’t wake up wanting “geometric windows.” They call us because a specific opening or a specific problem pushed them there. Here’s what that usually looks like in Burbank.

  • An arched or shaped opening in an older home. Tudor and Spanish Revival homes around Magnolia Park and the Rancho Equestrian area often have arched doors, eyebrow dormers or half-round transoms. When the original wood unit rots out, a rectangular replacement leaves a gap you can’t hide with trim, so you need a made-to-shape unit.
  • A hillside or view home where the wall is the feature. Up toward the Verdugo foothills and the streets that climb off Sunset Canyon, homeowners frequently want a large picture or angled corner window to capture the view. These are almost always custom because the opening is larger or angled differently than any stock size.
  • A remodel or addition that changes the wall geometry. When you add on or reconfigure a room, the new gable end or the new angled corner doesn’t match standard rough openings. That’s a custom templating job, and it’s far easier to get right when the same contractor framing the addition is setting the window.
  • Drafty, failing or fogged units in an unusual shape. Old geometric windows are the worst offenders for air leaks and condensation because the seals at curved and angled frames break down faster. If you feel a draft along a curved frame, the unit usually needs replacement, not a caulk job.
  • A design intent that stock windows can’t match. Some Burbank homes are built or renovated around a specific architectural detail, and a triangular clerestory or round accent window is the point. You can’t fake that with a rectangle.
  • HOA or historic-design pressure. Some neighborhoods and planned communities have design guidelines that call for a specific shape or proportion. Custom lets you match what’s required instead of arguing for a substitute.

If any of these sound familiar, call (844) 797-7958 for a free estimate and design consult. We’ll tell you honestly whether a custom unit is the right call or whether a stock window with proper trim will get you the same look for less.

Our Custom & Geometric Windows Process

Custom windows are a measuring-and-fabrication job before they’re an installation job. Get the first part wrong and the second part can’t save you. Here’s how we run it.

  1. Free estimate and design consult. We walk the opening with you, talk through shape, glass, finish and budget, and confirm whether custom is truly needed. We quote upfront, so the number you see is the number you pay. No surprises once the unit is ordered.
  2. Precise field measurement and templating. For shaped and angled openings, we template the actual opening rather than trusting a drawing. We check for square, level and plumb, because older Burbank homes settle and almost nothing is perfectly true. This step is where the whole job is won.
  3. Fabrication with our brand partners. The unit is built to the template. Depending on the project, we work with established window and building-material manufacturers to match the frame, glass and finish to the rest of your home. You choose quality, not just whatever’s in stock.
  4. Careful removal and framing correction. We pull the old unit, repair any rot or framing issues we find behind it, and square the opening as needed. This is also where proper flashing and water management get set up, since shaped openings shed water differently than rectangles.
  5. Installation and sealing. We set the custom unit, shim and fasten it, seal and flash it correctly, and finish the interior and exterior trim so the shape reads clean. Our background-checked, uniformed technicians treat your home like it’s occupied, because it is.
  6. Final walkthrough and written guarantee. We walk the finished work with you, confirm operation and sealing, and hand over the 730-Day Done Right Promise in writing. If anything isn’t right, we make it right.

One note on safety and structural work: large custom units, especially angled corner glass and tall shaped windows, are heavy and load-bearing-adjacent. Setting them safely and flashing them correctly is skilled work. We handle that with trained technicians rather than leaving it to a weekend project.

Installers setting a new window and checking it for level

Custom & Geometric Windows Pricing in Burbank

Custom and geometric windows in Burbank typically run $900 to $3,500 per unit installed, with simple half-rounds and small accent windows near the low end and large arched or angled feature units at the high end. Full geometric walls or multi-unit configurations can exceed that. The shape and size drive most of the cost, not the brand name.

Line Item Typical Range (Installed)
Small accent unit (round, oval, small half-round) $900 – $1,600
Standard arched or eyebrow window $1,400 – $2,400
Large arched, trapezoid or angled unit $2,200 – $3,500+
Mitered or angled corner window $2,500 – $5,000+
Framing repair or squaring of opening $300 – $900
Interior/exterior trim and finish $250 – $800 per unit
Templating and field measurement Included in estimate

What moves the number up or down: glass type (standard clear vs. low-E or specialty), frame material, the complexity of the shape, how true the existing opening is, and whether hidden rot or framing issues turn up once the old unit comes out. We quote upfront so you’re not guessing after the fact. To make a larger project easier to take on, we offer 0% financing for 18 months and $1,000 off projects over $10,000. Call (844) 797-7958 for a free estimate and design consult, and we’ll give you a real number for your actual opening.

Lead times are worth planning for. Custom geometric windows are fabricated after measurement, so expect a longer wait than a stock window off the shelf. We’ll tell you the honest timeline up front rather than promising a date we can’t hold.

FAQs – Custom & Geometric Windows

How much do custom and geometric windows cost in Burbank?

Custom and geometric windows in Burbank typically cost $900 to $3,500 per unit installed, depending on shape, size and glass. Small accent windows sit near the low end, large arched or angled feature units and corner windows run higher. Call (844) 797-7958 for an exact quote; estimates are free and upfront.

Are custom geometric windows more expensive than standard windows?

Yes, custom geometric windows cost more than stock windows because each unit is built to your specific shape and size after measurement. The extra cost comes from fabrication and templating, not from choosing a premium brand. We’ll show you where a custom unit is worth it and where a stock window with proper trim does the same job for less. Call (844) 797-7958 to talk it through.

Can you match an arched or angled window on my older Burbank home?

Yes, we can match an arched or angled opening on older Burbank homes by templating the actual opening rather than ordering to a drawing. We take field measurements and account for settling and out-of-square framing common in pre-war and mid-century homes. Call (844) 797-7958 and we’ll come measure your opening.

Will my new custom windows leak around the shaped frame?

New custom windows shouldn’t leak if the opening is properly flashed and sealed during installation. Shaped and angled openings shed water differently than rectangles, so getting the flashing right is the part most installers rush. We set and flash every unit as part of the job and back the workmanship with our 730-Day Done Right Promise. Call (844) 797-7958 for a free estimate.

If you’re still mapping out the wider project, our home page and the Burbank service area page can point you to related work, from windows and doors to exterior trim and additions.

Ready to talk through your custom window? Call (844) 797-7958 for a free estimate and design consult. A live person answers around the clock, so you won’t hit voicemail or wait until Monday, and we’ll give you upfront pricing and honest guidance on what your opening actually needs. Built to last, backed in writing.

Written by the team at Groundwork Construction Co. of Burbank, serving Burbank.

Getting started with Groundwork in Burbank

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Burbank team

A local vetted partner works across Burbank and the towns around it, to the same written standard as every Groundwork job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Burbank? Licensed & insured · free written estimates
Call (844) 797-7958
Local Service Coverage

Request a Free Estimate in Burbank

Tell us what you need - Groundwork Construction Co. of Burbank responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch