







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterFence Gates in Burbank, CA
A fence gate in Burbank typically costs $450 to $1,800 installed, with most single-walk gates landing around $600 to $950 and driveway or double gates running $1,200 to $3,500 depending on width, material, and hardware. The gate is the part of the fence that gets used every single day, so it takes far more abuse than the panels around it. We build gates that swing true, latch cleanly, and hold up to the hillside grade changes you find all over Burbank, from the sloped lots above Glenoaks to the flat driveways off Magnolia Boulevard. If you want a gate that closes right the first time and keeps closing right years later, call Groundwork Construction Co. of Burbank at (844) 797-7958 for a free estimate and design consult.
This page covers gates specifically. If you’re planning a whole new fence line, start with our Fence Installation service, which walks through posts, panels, and material selection from the ground up.

When You Need Fence Gates
- Your existing gate is sagging or dragging on the ground. In Burbank, the summer heat dries out wood posts and the winter rain swells them, so a wooden gate that swung fine in April can scrape the concrete by August. That swing pattern is a gate problem, not a fence problem, and it’s fixable with better posts and a real cross-brace.
- You need a side-yard gate for trash cans, bikes, or AC access. The narrow side yards common in the Rancho Equestrian neighborhood and along the older blocks off Verdugo Avenue call for a gate sized to the gap, usually 30 to 36 inches, with a spring-loaded self-close so it doesn’t smack the house.
- You’re adding a driveway gate for security or privacy. A solid driveway gate with keyed hardware and a steel frame changes how the front of a Burbank home reads from the street, and it keeps vehicles out of a driveway when you’re away.
- Your current gate is out of square or won’t latch. When a gate won’t engage the strike plate, the post has usually moved or the hinges have worn. We reset posts in proper concrete footings and hang a gate that lines up every time.
- You want a gate matched to a new or existing fence. If you’re putting up new fencing, building the gates as part of the run means the stiles, rails, and finish all match, whether the fence is a James Hardie composite or a natural wood privacy style.
- You have pool or pet-safety requirements. Burbank homeowners with pools or dogs often need a self-closing, self-latching gate. We build to that spec so the gate actually holds up to daily use.
Our Fence Gates Process
- On-site measure and grade check. We measure the opening, check where the ground sits at each post, and note any slope across the gate. Hillside properties above Kenneth Road and the foothill streets often have a grade drop that a stock gate can’t handle, so we build to the actual site instead of guessing.
- Material and hardware selection. You choose the gate frame and finish to match your fence line, and we walk you through hinge and latch options: standard strap hinges, self-closing springs, keyed locks, or decorative hardware. We use trusted brands for the surrounding structure, and any gate built onto a Tuff Shed-adjacent run or near a James Hardie-sided wall gets matched trim so it doesn’t look bolted on.
- Post and footing work. A gate is only as solid as its posts, so we set gate posts deeper and heavier than line posts, in concrete, sized to the gate’s weight. This is the step most cheap gate jobs skip, and it’s the reason their gates sag within a year.
- Build and hang the gate. We build the frame square, add the diagonal brace so the gate can’t rack, mount the hinges, and set the latch and any self-close mechanism so the gate swings and catches without a shove.
- Final swing test and walkthrough. We open and close the gate with you, check clearances, adjust hardware, and show you how to maintain it. Every gate we install is backed by our 730-Day Done Right Promise: if it’s not right, we make it right.

Fence Gates Pricing in Burbank
Fence gate pricing in Burbank runs from a few hundred dollars for a basic walk gate to several thousand for a custom double driveway gate, and the honest range depends on width, material, and hardware. Here’s how the numbers break down.
| Gate Type | Typical Installed Range |
|---|---|
| Single walk gate (wood or composite) | $450 – $950 |
| Side-yard / utility gate (30 – 36 in.) | $400 – $800 |
| Custom walk gate with self-close & latch | $800 – $1,300 |
| Double swing driveway gate (wood or composite) | $1,200 – $2,800 |
| Custom driveway gate (steel frame, keyed hardware) | $2,200 – $3,500 |
| Hardware upgrade (hinges, latch, keyed entry) | $75 – $350 |
| Gate post reset / footing work | $150 – $500 per post |
What Affects Gate Cost in Burbank
- Width and weight. A 36-inch walk gate uses simpler hinges than a 12-foot driveway gate. Wider and heavier gates need bigger posts and heavier hardware, which adds labor and material.
- Material. Natural wood is the budget option; composite gates matched to a James Hardie-style fence line cost more upfront but handle Burbank’s dry summers and winter rain without the seasonal swelling that throws wood gates out of alignment.
- Hardware. A basic barrel hinge and thumb latch is inexpensive. Self-closing springs, keyed locks, and decorative iron hardware cost more but change how the gate performs and looks.
- Site conditions. A gate on a slope or over uneven ground takes more footing and framing work than one on flat ground. Burbank foothill properties see this often.
- Anything automated. A manual gate is priced here. If you want motorized openers later, tell us now; the frame and posts need to be sized for it from the start, and that’s a different build.
We price every gate with upfront pricing, no surprises: the number you see is the number you pay. New fence projects over $10,000 qualify for $1,000 off, and 0% financing for 18 months is available to spread the cost. The free estimate and design consult is where we put real numbers in front of you.
Repair or replace the gate?
It’s usually cheaper to repair a gate when the posts are solid and only the hinges, latch, or a single rail are failing, and that fix often runs $150 to $400. Replace the gate when the frame is out of square, the wood is rotten, or the posts have moved. A gate that’s been “repaired” three times with new hinges on a leaning post is money spent on a problem that won’t go away. We’ll tell you which situation you’re in before we quote anything.
FAQs – Fence Gates
How much does a fence gate cost in Burbank?
A single walk gate in Burbank typically runs $450 to $950 installed, while double driveway gates run $1,200 to $3,500 depending on width, material, and hardware. Call (844) 797-7958 for an exact quote; estimates are free and pricing is upfront with no surprises.
Can you install a gate on a sloped yard or hillside property?
Yes. Sloped yards and hillside properties above Glenoaks and along the foothill streets are common in Burbank, and we build gates to the actual grade with posts set at the right depth so the gate swings level. A stock gate dropped onto a slope is exactly how you get a gate that drags or won’t latch. Call us to look at the grade in person.
Wood or composite gate: which holds up better in Burbank?
Composite holds up better to Burbank’s hot, dry summers and wet winters because it doesn’t swell, shrink, or rot the way natural wood does, though wood costs less upfront. If your gate sits in full sun or your fence line is composite like a James Hardie finish, we lean composite for the long haul. Call (844) 797-7958 and we’ll match the gate to your existing fence.
Can you come out today for a gate estimate?
Calls to Groundwork Construction Co. are answered by a live person 24/7, so you reach a real human any time, not a voicemail. We schedule a free estimate and design consult at a time that works for you, and our technicians arrive background-checked and in uniform. Call (844) 797-7958 to get on the schedule.
What warranty comes with a new fence gate?
Every gate and fence we install is covered by our 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction: if it’s not done right, we make it right. That’s backed in writing, not just promised. Call for the full details.
Whether you need one side-yard gate to replace a sagging one or a matched set across a new fence line built on a trusted brand like a KraftMaid-standard finish, this is the kind of job we take seriously. Burbank homeowners call us because we set posts deep, build gates square, and stand behind the work for two years. When you’re ready to plan your gate, call Groundwork Construction Co. of Burbank at (844) 797-7958 for a free estimate and design consult, or start with our home page to see the full range of what we build.
Written by the team at Groundwork Construction Co. of Burbank, serving Burbank.


