







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Altadena: What the Job Actually Involves
Paver driveway installation in Altadena runs $7,000 – $18,000 depending on square footage, base depth, and paver grade, and a typical two-car driveway takes 5 to 8 working days from demo to the first pass with a plate compactor. The reason it takes that long isn’t the pavers themselves; it’s the excavation, the compacted aggregate base, and the edge restraint that decide whether the driveway still looks level after five winters of foothill rain. Call (844) 797-7958 to schedule a free on-site estimate, and we’ll walk your slope and give you a written, line-item number before anything gets torn out.
How We Build a Paver Driveway in Altadena, Start to Finish

Most contractors give you a start date and a finish date and leave out everything between. Here’s the actual sequence we run, and the points where you’ll be making a decision rather than watching.
Stage 1: Site walk and layout (day 1, about 90 minutes)
We measure the drive, check the existing slope and drainage path, and confirm where the water currently goes when it rains. You decide the paver pattern and the edging material here, because both affect the base prep. If the drive meets a garage slab or an older retaining wall, we check those transitions now rather than discovering a height problem on day 4.
Stage 2: Demo and excavation (days 1 – 2)
Old concrete, asphalt, or gravel comes out and goes to a transfer station. On a steep Altadena lot, spoil removal may mean a smaller dumpster and more trips, which is real time. You’ll see bare subgrade by the end of day 2 on most jobs.
Stage 3: Base and compaction (days 2 – 4)
This is where a driveway lives or dies. We lay crushed aggregate in lifts, compacting each one, and check grade with a laser as we go. A single pass on a thick lift leaves voids that show up as ruts two seasons later. You don’t need to decide anything here; you just need to know it’s the slow part and it isn’t being rushed.
Stage 4: Edge restraint, bedding sand, and pavers (days 4 – 6)
We set the edge on the sides that need it, screed the bedding layer, and run the field. Corners, curves, and the apron at the street take the longest. You’ll confirm the runner course, the border color, and any transition to a walkway during this stage.
Stage 5: Compaction, joint sand, and cleanup (days 6 – 8)
A final plate-compaction seats the field into the bedding, then polymeric or plain joint sand goes in and gets watered in. We sweep, haul the equipment, and do a walkthrough with you. Your only job is to stay off it and keep car tires off the fresh joint sand for the first couple of days.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Paver driveways aren’t a single product. The choices below are the ones that change both the look and the number, and each one has an honest downside.
- Concrete pavers: The workhorse. Interlocking, 60mm to 80mm thick, rated for vehicle loads, and easy to lift and reset if a section settles. Downside is a more utilitarian look than clay, though Belgard and similar lines now copy stone textures well.
- Clay brick pavers: The right call for a Craftsman bungalow or a Spanish Colonial here. Color runs deep into the brick rather than sitting on the surface, so wear doesn’t expose a different color underneath. They cost more and chip more readily under heavy loads.
- Permeable pavers: Open joints and a graded base let water soak in rather than run off, which matters on a sloped lot where runoff is already a headache. They need periodic vacuuming to keep the joints open, so they’re not zero-maintenance.
- Base depth: Six inches of compacted aggregate suits a car and light truck; deeper is worth it on soft or previously graded soil. This is invisible money and it’s the best money you’ll spend.
- Edge restraint: Concrete curb or a pinned plastic edge keeps the field from spreading. Going cheap here shows up within a few years as a sagging border.
Material choices only work when the base under them is right, which is why we treat pavers as part of one system rather than a surface product. If the wider scope includes a front walk, consider the Driveway & Pavers work we handle alongside it.
What Paver Driveways Cost in Altadena, CA

Expect $7,000 – $18,000 for a full paver driveway installation in Altadena, with most two-car drives landing between $10,000 and $14,000. Below is how the number splits and what pushes a job from the low end to the high end.
| Line item | Typical range |
|---|---|
| Paver driveway installation (full job) | $7,000 – $18,000 |
| Paver patio installation (paired work) | $3,500 – $11,000 |
| Driveway sealing (after installation) | $250 – $700 |
Four variables move the price most. First, area: a single-car drive runs closer to the low end, a long hillside drive pushes toward the high end. Second, base conditions: soft or filled soil, or an existing slab that needs breaking out, adds labor. Third, material: clay brick pricing sits above concrete pavers. Fourth, access: on a narrow, oak-lined lane where a standard truck can’t get close, spoil removal and material staging get slower and more hands-on.
A written estimate should list excavation, hauling, base material and depth, compaction, restraint, pavers, joint sand, and cleanup, with a clear statement of what’s excluded. What typically isn’t included: drainage corrections beyond light regrading, retaining wall repairs, and anything tied to an unpermitted prior install.
See the difference
Before
After
Before
After
Before
AfterWhat Altadena Homes Do to a Paver Driveway Job
Altadena isn’t Pasadena. The housing stock here is mostly 1920s – 1950s, with a heavy share of individually designed homes on large, sloping lots, and that changes what a driveway job looks like. On a lot off Mendocino or Santa Rosa, the drive often climbs, which means base depth, drainage fall, and even the edge restraint have to account for grade rather than sit flat like a tract-home front. On hillside lots the lanes are narrow and heritage oaks sit close to the drive, so getting equipment and material to the work area is a smaller operation with more hand labor.
The climate adds its own layer. Hot, dry summers and Santa Ana winds dry the ground and stress every edge, and the intense winter downpours that test older hillside drainage will find any weakness in the base you skipped. That’s why we check where rainwater currently sheds before we lay a single paver. We pull the permits the local jurisdiction requires and coordinate any inspections the job triggers, so the wall holding the drive doesn’t become an unpermitted footnote. We also check fire-hardening requirements on anything near the structure. We cover the whole of Altadena, and this job is well worth pairing with Door Installation in Altadena if you’re hardening the whole front approach at once.
Serving Altadena, CA – Our Local Coverage Area
We serve Altadena and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Paver Driveways in Altadena

Most paver driveways take 5 to 8 working days, with the base prep claiming two to three of those. Rain on a foothill lot can add a day or two of drying before we run the field. Call (844) 797-7958 for a realistic schedule based on your slope.
Often yes, particularly where the work touches a retaining wall, drainage, or the public right-of-way. Permit scope depends on the property, so we confirm it before we demolish anything and coordinate inspections as the job goes. Call (844) 797-7958 and we’ll tell you what your job likely needs.
Usually yes. Paver driveways sit on top of the existing subgrade, so in most cases nothing underneath gets relocated. Where a slope, wall, or drainage line needs addressing, we find that in the site walk and price it upfront rather than mid-job. Call (844) 797-7958 for an on-site look before you commit.
Area, base condition, material, and access are the four biggest price drivers. On a hillside lane where a full-size truck can’t reach the drive, labor goes up even if the paver count is the same. Call (844) 797-7958 for a written, line-item estimate so you can see every line.
Workmanship is covered by our 730-Day Done Right Promise, and the paver manufacturer’s warranty applies separately. If the base, compaction, or restraint fails in that window, we make it right. Call (844) 797-7958 and we’ll put it in writing with your estimate.
Get a Free Paver Driveway Estimate in Altadena
We’ll come out, look at your slope and drainage, and give you a written line-item estimate for paver driveways in Altadena at no cost, with no obligation and no change orders once work starts. Call (844) 797-7958 and a live person picks up, day or night. Ask about our $1,000 off projects over $10,000 and 0% financing for 18 months if the scope grows. If you’re planning a broader front-yard remake, start with Driveway & Pavers in Altadena and we’ll fold the paver drive into it.
Written by the team at Groundwork Construction Co.












