







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in Sierra Madre, CA: What It Costs and How Long It Takes
Concrete driveways and concrete work in Sierra Madre typically run $4,500 to $12,000 for a full driveway pour, and most residential pours take three to five working days from demo to the day you can park on it. A replacement on an existing slab lands closer to $5,000 to $14,000 once you account for hauling off the old concrete and rebuilding the base. Call (844) 797-7958 and we’ll walk your driveway and give you a written number before anything gets torn out.
How the job actually runs, stage by stage

Concrete is unforgiving. A slab poured over a bad base fails no matter how good the finish looks, so the schedule below front-loads the work nobody sees.
Stage 1: Walk-through and layout (day 1)
We measure the run, check slope and drainage away from the house, and confirm where the expansion joints land. This is when you decide the width, thickness, and whether you want a widened apron for a second vehicle. On sloped Sierra Madre lots we also flag whether the grade needs a retaining edge or a swale before we pour.
Stage 2: Demo and haul-off (day 1-2)
Old concrete comes out with a breaker and goes into a dumpster, not a pile in your side yard. A typical two-car driveway generates several tons of debris, so hauling is a real line item. If the existing slab is sound and only cracked at the surface, we’ll tell you – sometimes an overlay makes more sense than a full tear-out, and the savings are real.
Stage 3: Base prep and grading (day 2-3)
We excavate to depth, compact the subgrade, and lay a compacted aggregate base. For a standard driveway that’s roughly 4 inches of concrete over 4 inches of base; for heavier loads or hillside work we go thicker. Drainage is set here, and this is the stage that decides whether the slab cracks in five years or fifteen.
Stage 4: Forming, rebar, and any inspections (day 3-4)
Forms go in, rebar or mesh gets tied, and if the job requires a permit, the inspection happens before the pour. You’ll want to be available to confirm the layout looks right before we commit the concrete. Once it’s poured, changes cost ten times what they cost now.
Stage 5: Pour, finish, and cure (day 4-5, then a week of patience)
We pour, screed, and finish to the surface texture we agreed on, then cut control joints so the slab cracks where we want it to instead of where it wants to. Cure takes about 7 days before light foot traffic, longer before vehicles. Full strength develops over roughly 28 days.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll actually choose between
- Standard broom finish: The workhorse surface. Textured for traction, hides tire marks reasonably well, and costs the least of any finish. Best for long, steep runs where grip matters more than looks.
- Exposed aggregate: Aggregate is washed to the surface for a pebbled look with strong traction. Holds up well in the heat and hides dust, but the rougher texture is harder to shovel and sweep.
- Stamped or colored concrete: Decorative patterns that read like stone or brick. Adds cost and requires more maintenance resealing, so it suits a front approach you want to show off, less so a working side drive. If a patterned look is what you’re after, that’s part of a full Driveway & Pavers in Sierra Madre conversation.
- Thickness and reinforcement: Standard residential is 4 inches; 5 to 6 inches with rebar is the sensible upgrade for a heavy truck, a long span, or clay-heavy soil. Costs more now, saves a replacement later.
- Width and turning radius: A standard two-car drive is 20 to 24 feet wide. Wider aprons and eased curves add square footage and material, but they’re the difference between a comfortable back-out and a daily three-point turn.
What Concrete Driveways & Concrete Work costs in Sierra Madre, CA

Expect $4,500 to $12,000 for a new concrete driveway and $5,000 to $14,000 for a full replacement. Those ranges are market-calibrated for Sierra Madre, not a national average, and the number that lands depends on a few specific variables.
The variables that push a job low or high:
- Square footage and thickness: Concrete is priced by volume. Doubling the width or bumping from 4 to 6 inches of slab moves the number fast.
- Demo and haul-off: Tearing out an old slab, loading it, and paying dump fees adds real cost that a fresh pour doesn’t carry.
- Slope and grading: Hillside runs need thicker base, retaining edges, or drainage correction – common on the canyon-edge lots here.
- Site access: A narrow, steep, or gated approach means smaller loads and more labor to move material.
- Permit scope: Some jobs need a permit and inspection before the pour; that adds time and a fee, not just paperwork.
A written estimate should spell out square footage, slab thickness, base depth, rebar or mesh, finish, demo, and haul-off as separate lines. What it typically doesn’t include: unforeseen subgrade repair, retaining walls, drainage systems, or landscape restoration. We put pricing in writing up front so the number you see is the number you pay, and every job is covered by our 730-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterWhat Sierra Madre homes specifically do to this job
Sierra Madre’s hillside and canyon-edge properties sit in the foothills of the San Gabriel Mountains, and that geography shapes concrete work more than most homeowners expect. On the slopes, winter rains intensify erosion, so a driveway that just gets poured over the existing grade without addressing drainage will heave and crack within a couple of seasons – we build the water path first. In the canyon neighborhoods off Sierra Madre Boulevard, older homes often carry unpermitted additions and undersized drainage, and it’s not unusual to uncover seepage or poor subgrade that has to be corrected before a pour.
The housing stock runs from early-20th-century Craftsman bungalows and Spanish Colonial Revival homes near downtown to mid-century ranches and custom hillside builds that need foundation and drainage attention because of the terrain. That matters for a driveway: we’re usually tying into older hardscape with its own quirks. Santa Ana winds and the wildfire risk they carry also push homeowners toward fire-resistant, low-flammability hardscape, and a clean concrete approach doubles as defensible space. We cover all of Sierra Madre and the surrounding foothill communities – if you’re coordinating a larger project, our Driveway & Pavers service covers the wider scope, and homeowners often pair this with ADU Site Prep & Utilities in Sierra Madre when a new unit needs its own approach.
Serving Sierra Madre, CA – Our Local Coverage Area
We serve Sierra Madre and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Concrete Driveways & Concrete Work in Sierra Madre

Most residential concrete driveways take three to five working days from demo to final finish, then about 7 days of cure before foot traffic and roughly 28 days before you park a car on it. Complex hillside jobs with drainage or retaining work run longer. Call (844) 797-7958 for a timeline tied to your specific site.
It depends on the scope – a straight replacement often doesn’t, while new driveway approaches, grading changes, or work near the right-of-way usually trigger a permit and an inspection before the pour. We’ll tell you up front whether your job needs one and handle the inspection timing. Call (844) 797-7958 to find out where yours falls.
Often, yes. A driveway replacement stays outside the house footprint, so plumbing and structure usually stay untouched – the disruption is in the yard and site access. When a project does run into structure or drainage corrections, we flag it before the work starts. Call (844) 797-7958 for an on-site look.
New concrete driveways run $4,500 to $12,000 and replacements run $5,000 to $14,000, with the final figure driven by square footage, thickness, demo, slope, and permit scope. A written line-item estimate tells you exactly where your number comes from. Call (844) 797-7958 – estimates are free.
Every concrete job we do is covered by our 730-Day Done Right Promise – if it isn’t done right, we make it right, and that’s one of the longest workmanship guarantees in residential construction. That coverage is in writing, not a verbal handshake. Call (844) 797-7958 to talk through the details.
Get a written estimate for your Sierra Madre concrete job
Call (844) 797-7958 and we’ll set up a free on-site estimate for concrete driveways & concrete work in Sierra Madre. A live person answers around the clock, so you’re not leaving a voicemail and waiting until Monday. We’ll measure the run, check the base and drainage, and hand you a written number with every line spelled out. From foundation to finish line, built to last and backed in writing – and homeowners planning a broader project can see the full scope with Sierra Madre coverage and Door Installation in Sierra Madre when the entry needs to match the new approach.
Written by the team at Groundwork Construction Co.












