







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterGutter Installation Cost in Burbank, CA: What You’ll Actually Pay
Gutter installation in Burbank typically runs $1,400-$3,200 for a standard single-story home, and $2,800-$6,500 for two-story hillside homes that need oversized 6-inch gutters and heavier downspouts. Seamless aluminum is the most common choice here; copper and half-round steel push well past that. The number depends less on square footage than on your roofline, your slope, and what the Verdugo foothills fire-clearance rules have done to your lot’s drainage. Call Groundwork Construction Co. of Burbank at (844) 797-7958 for a free, upfront quote - the number you see is the number you pay.

Why Burbank’s Low Rainfall Is a Trap for Homeowners
Burbank averages under 15 inches of rain a year, which tricks a lot of homeowners into treating gutters as optional - until a wet December sends flash runoff off a fire-cleared hillside slope and straight into a 1940s Craftsman foundation that was never designed for concentrated sheet flow. That’s the drainage paradox here: the dry years lull you into skipping maintenance and undersizing the system, then one storm event exposes every gap at once.
The basin sits hot and dry under Santa Ana wind events that push fire risk into the Verdugo and hillside edges. Those same winds drive the heat that cracks stucco and dries out fascia boards on the flats, especially along the Magnolia Park blocks where 1920s-40s bungalows still carry original wood trim. When the rain finally does come, that dried-out wood and those undersized 5-inch gutters are the first things to fail. Upfront pricing from our team includes a drainage slope check so the work holds up past the first wet season.
6-Inch vs. 5-Inch: Why the Foothills Need More
If your home sits above the valley floor, the standard 5-inch residential spec usually isn’t enough. After fire-clearance work removes ground cover on the slope, the soil can’t absorb what it used to, so runoff volume and velocity go up sharply. Gutters sized for a vegetated lot become undersized the moment that clearance happens - and the failure shows up in one storm, not over years.
Oversized 6-inch gutters with larger-diameter downspouts are the fix. Expect that upgrade to add roughly $2-$5 per linear foot over standard 5-inch aluminum, and more if you need custom hangers or a high-capacity leader to move water away from the foundation. This has to be scoped at installation, not after the first flood. Our technicians have up to 12 years of experience sizing these systems for slope, and our work is covered by the 730-Day Done Right Promise - if it’s not done right, we make it right.

What Drives the Price Up or Down in Burbank?
Four scenarios show up most often, and each one moves the number:
- Single-story ranch on the flats. Straight ladder access, standard fascia, clean runs. This is the low end of the range and the simplest job to quote.
- Two-story hillside home. Ladder setup, fall protection, and a safety surcharge for the extra height. Expect the higher band, plus more downspout footage.
- Spanish Revival with no existing fascia board. Many of these homes were built without a fascia to hang from, so custom bracket fabrication is required before a single run goes up.
- Mature palm or eucalyptus debris load. Heavy leaf drop changes which gutter guard you choose - cheap mesh clogs fast under palm fronds, so we spec the guard to the tree, not the other way around.
Seamless runs cut on site beat pre-cut sections every time on longevity, and if your roofline or drip edge needs attention while we’re up there, that’s a conversation worth having before the gutters go on. If the fascia or roof edge is failing, we can fold that into a Roofing scope so you’re not paying for two mobilizations.
Burbank Gutter Installation Price Ranges
| Item | Typical $ Range |
|---|---|
| Seamless aluminum, single-story (standard 5-inch) | $1,400-$3,200 |
| Oversized 6-inch upgrade (per linear foot) | +$2-$5 / lf |
| Two-story hillside setup with safety surcharge | $2,800-$6,500 |
| Custom bracket fabrication (no existing fascia) | $300-$900 |
| Gutter guard installation (palm/eucalyptus spec) | $600-$1,800 |
| Drainage slope verification & re-pitch | Included in quote |
| Downspout extensions / leaders to grade | $150-$500 |
Pairing gutters with a simultaneous exterior or roofing job cuts total mobilization cost, and our 0% financing for 18 months makes it easier to do both at once. Projects over $10,000 also take $1,000 off.
How Do We Price a Job Like This?
We start with a drainage slope verification - checking that water actually pitches toward the downspout instead of pooling mid-run. It’s a step a lot of installers skip, and skipping it is exactly why gutters sag and hold standing water within two seasons. From there we measure roofline footage, count downspouts, and confirm whether fire clearance has changed your slope hydrology before we quote a single number. What we check before quoting:
- Roof pitch and run length, so the gutter is sized to the actual water load.
- Fascia condition - original wood on older bungalows often needs repair first.
- Downspout placement and where the water lands (grade, hardscape, foundation).
- Tree debris type, which sets the guard spec.
Calls reach a live person 24/7, so you’re never stuck waiting until Monday. Technicians are background-checked and arrive in uniform.
FAQs
Gutter installation in Burbank runs about $1,400-$3,200 for a single-story home and $2,800-$6,500 for a two-story hillside property needing 6-inch oversized gutters. Call (844) 797-7958 for an exact quote - estimates are free.
Yes, if your lot has had fire-clearance work done. Removing ground cover reduces soil absorption, so runoff spikes and standard 5-inch gutters can overflow in a single storm. We size to your slope and downspouts - call (844) 797-7958 to get it scoped right.
It can. The city’s vegetation management requirements change how water moves across your slope, and a system sized for a vegetated lot may be undersized after clearance. We verify drainage and slope at install - free estimates, just call.
Many straightforward single-story jobs are completed in a single visit. Two-story or fabricated-bracket work takes longer to scope. Call (844) 797-7958 to check availability - a live person answers around the clock.
Get a Straight Gutter Number
Don’t wait for the first wet December to find out your gutters are undersized. Groundwork Construction Co. of Burbank gives you upfront pricing, a drainage slope check on every job, and the 730-Day Done Right Promise in writing. Call (844) 797-7958 for your free estimate and design consult, and see more of what we do across our Burbank service area.
Written by the team at Groundwork Construction Co. of Burbank, serving Burbank, CA.
What Our Customers Say
"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."
- Angela Wong"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."
- Laura Bennett"Quality work and honest pricing. He is stretched across a few jobs at once so he is not always on site, though the carpenter who was there knew everything."
- Whitney Norris












