







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Much Does Paver Driveway Installation Cost in Burbank?
Paver driveway installation in Burbank typically runs $7,000 to $18,000 for a standard two-car driveway with site prep, base, and finish. Most homeowners land around $11,000 to $14,000 once haul-away and drainage are factored in. A basic single-car approach can come in near the low end, while larger driveways with premium pavers and hillside grading push toward the top.
That range assumes a surface of roughly 400 to 700 square feet, which covers most Burbank residential lots. Driveways that meet the city’s hillside streets or require retaining work go higher. We give you a written number up front and it doesn’t move once the work starts.

Paver Driveway Installation Cost Breakdown (2026)
Here’s how the money breaks down on a typical Burbank paver driveway. Each line is a real range you can expect to see in a bid, not a placeholder.
| Line Item | Typical Cost Range |
|---|---|
| Full paver driveway installation (400 – 700 sq ft) | $7,000 – $18,000 |
| Removal and haul-off of existing concrete or asphalt | $1,500 – $3,500 |
| Excavation and base prep (compacted gravel, geotextile) | $1,800 – $4,000 |
| Paver material – standard concrete pavers | $3 – $7 per sq ft installed |
| Paver material – clay brick or premium pavers | $7 – $14 per sq ft installed |
| Edge restraints and curbing | $400 – $1,200 |
| Drainage corrections (drainage channels, regrading) | $800 – $2,800 |
| Permit and engineering (when required) | $150 – $900 |
What pushes a driveway toward the low end: a flat, clear lot, standard concrete pavers, minimal grading, and no removal. What pushes it toward the high end: steep hillside access, clay-brick or luxury pavers, drainage that has to be engineered from scratch, and a long driveway that eats material by the square foot. Burbank’s hillside streets in the Verdugo Mountains area regularly add excavation time because the grade makes every machine pass slower.
We quote installation, base, and material as separate lines so you can see exactly where the money goes. That’s what upfront pricing, no surprises actually means.
What Affects Paver Driveway Installation Pricing in Burbank
- Driveway size. Material and labor scale with square footage. A single-car driveway with a tight apron can land near $7,000, while a wide two-car driveway with a turn-around easily reaches the top of the range.
- Slope and grade. Many Burbank homes sit on the slopes below the Verdugo Mountains or the hills above Olive Avenue. Steep driveways need deeper base and often retaining walls, which adds cost and time.
- Paver choice. Standard concrete pavers keep the budget in the middle. Clay brick, tumbled stone-look, or permeable pavers raise material cost and labor because they need tighter tolerances and more cutting.
- Existing surface removal. Tearing out old concrete or asphalt is a real line item. If your foundation-era driveway is still there, plan for haul-off and disposal fees on top of the pavers.
- Drainage and code. Burbank gets the heavy winter rain that comes with the San Fernando Valley’s storm pattern, and a driveway that pools water will fail the pavers from underneath. We build positive drainage into every job because a driveway that doesn’t drain is a driveway that has to be rebuilt.
- Permits. A driveway that touches the public right-of-way, alters grading, or changes a curb cut may need a city permit. We walk you through what your particular property needs before we order material.

How Much Does It Cost Per Square Foot in Burbank?
Paver driveway installation in Burbank generally costs $15 to $30 per square foot installed, including base prep, material, and labor. Simple layouts with standard pavers sit near $15 to $20 per square foot. Premium pavers, complex patterns, and hillside grading push toward $25 to $30. For a 500 square foot driveway, that’s about $7,500 at the low end and $15,000 at the upper end, which is why most Burbank projects fall inside the $7,000 to $18,000 range.
Per-square-foot pricing is a helpful sanity check, but it hides the biggest variable: what’s under the surface. Two driveways that look identical from the street can cost thousands apart once excavation and base compaction are done right.
Can I Replace My Driveway for Less With Concrete or Asphalt?
Yes. Concrete driveway installation in Burbank typically costs $4,500 to $12,000, and asphalt driveway paving runs $3,500 to $9,000. Both come in below pavers on the front end. What pavers buy you is repairability: if a single paver cracks, we lift and reset that one piece. Concrete and asphalt crack as a slab, which usually means a patch that never quite matches.
If your existing driveway is sound and you just want to refresh it, driveway sealing at $250 to $700 is the cheapest option. A full driveway replacement at $5,000 to $14,000 is the middle path. Pavers are the upgrade when you plan to stay in the home and want the driveway to hold its look through Burbank’s summer heat and winter rain without cracking.
How Long Does a Paver Driveway Take to Install in Burbank?
Most paver driveways in Burbank take 3 to 6 days from start to finish, depending on size and site conditions. A straightforward flat driveway is often done in three or four days. Hillside properties with heavy excavation, drainage engineering, or retaining work stretch toward a week or more.
Weather is the wild card. Burbank’s dry season from spring through fall is the easiest window. Installing in a wet stretch means waiting for the base to dry before compaction, and we don’t rush that step. Our technicians have up to 12 years of experience reading site conditions, and the call on whether the ground is ready is theirs to make. Scheduling during the dry months keeps your project moving.
Do I Need a Permit for a Paver Driveway in Burbank?
Often, yes. A paver driveway that changes the width, alters grading, touches the public right-of-way, or modifies a curb cut typically requires a permit through the city. Straightforward resurfacing on an existing footprint sometimes doesn’t. Because the rules depend on the specific property and the grade, the answer for your home has to come from a site visit, not a general statement.
We handle the permit question as part of your free estimate. You’ll know before any work begins what needs approval, and the permit and engineering line on your bid tells you what it costs. That’s the piece most homeowners get surprised by with other contractors, and we’d rather put it in writing at the start.
How to Save on Paver Driveway Installation
There’s no magic discount on pavers, but a few moves meaningfully lower the bill.
- Right-size the driveway. Every extra square foot costs real money. A tighter footprint that still fits two vehicles saves more than any discount.
- Choose standard concrete pavers for the field. Keep the premium patterns for a border or the apron where they show. You’ll get the look without paying luxury pricing across the whole surface.
- Do the removal yourself if you can. If you’re able to break up and clear an old surface, you take the haul-off line off the bid. Many homeowners can’t, and that’s fine too.
- Bundle the job. A driveway done alongside a paver patio installation ($3,500 to $11,000) often saves on mobilization, because the crew and equipment are already on site.
- Ask about our standing promotions. We offer $1,000 off projects over $10,000 and 0% financing for 18 months, which spreads a $12,000 driveway over a year and a half without interest.
The fastest way to lock in a real number is a free estimate. Call (844) 797-7958 and we’ll come look at the actual grade and surface, then put the price in writing.
How Much Does Paver Driveway Installation Cost in Burbank Compared to Nearby Areas?
Burbank pricing sits in line with the wider San Fernando Valley, though hillside properties here can run 10 to 20 percent higher than flat lots in neighboring cities. The difference comes down to grade and access, not the pavers themselves. If you’re comparing bids across the area, our Burbank service area page explains how we scope jobs in this city, and you can start from our home page to see the rest of the work we do.
Homeowners weighing a bigger exterior project sometimes pair the driveway with other work. Fence installation (vinyl fence installation at $3,500 to $9,000, aluminum at $4,000 to $10,000) is a common add-on, since the driveway and fence share a property line and a crew. Roof replacement ($8,000 to $20,000) is separate but worth budgeting in the same conversation if your roof is near the end of its life.
What Are the Best Pavers for a Burbank Driveway?
For most Burbank homes, concrete pavers in a warm earth tone are the sweet spot on value. They hold color through the Valley sun, stand up to heavy winter rain, and replace one piece at a time. Clay brick is the traditional choice for the Magnolia Park and Rancho Equestrian neighborhoods and looks right on the older homes there. Permeable pavers are worth asking about if your lot has drainage trouble, because they let water pass through instead of pooling.
We work with a curated set of verified brand partners, including Belgard for pavers, so you’re choosing quality rather than whatever happens to be available. Our technicians have up to 12 years of experience setting pavers correctly, and the right base and joint sand matter more than the brand name on the box.
Why Choose Groundwork Construction Co. for Your Paver Driveway
A driveway is a big check to write, and the wrong contractor can leave you with pavers that settle, heave, or drain toward the house. Here’s how we handle it.
- Upfront pricing, no surprises. The number on your bid is the number you pay. Material, base, and labor are broken out line by line.
- Live person, 24/7. Call us anytime and a real person answers. No voicemail black holes, no waiting until Monday.
- 730-Day Done Right Promise. If it’s not done right, we make it right. That’s one of the longest workmanship guarantees you’ll find, and it’s in writing.
- Background-checked, uniformed technicians. The crew that shows up is vetted and presented professionally, every project.
- Financing that makes it work. 0% financing for 18 months, plus $1,000 off projects over $10,000.
Our technicians have up to 12 years of experience, and every project carries the same written guarantee. From foundation to finish line, one contractor handles the job. Built to last, backed in writing.
FAQs – Paver Driveway Installation Cost
How much does a paver driveway cost in Burbank?
A paver driveway in Burbank typically costs $7,000 to $18,000, with most two-car driveways landing between $11,000 and $14,000 once prep, base, and finish are included. Call (844) 797-7958 for an exact quote based on your driveway’s size and grade. Estimates are free.
Is it cheaper to repair or replace a paver driveway?
Repair is almost always cheaper than replacement. A localized fix, resetting settled pavers or re-sanding joints, runs a fraction of the $7,000 to $18,000 full-install range. Replacement only makes sense when the base has failed underneath the pavers or when the layout is beyond saving. Call (844) 797-7958 and we’ll tell you which one you’re looking at. The estimate costs nothing.
How much does paver driveway installation cost per square foot in Burbank?
Expect $15 to $30 per square foot installed, including base prep and labor. Standard pavers on flat ground come in near $15 to $20, and premium pavers with hillside grading push toward $25 to $30. Call (844) 797-7958 for a per-square-foot number on your actual driveway.
Can you install a paver driveway on a hillside lot in Burbank?
Yes. Hillside properties below the Verdugo Mountains are common here, and they’re very installable once the grading is designed properly. Expect the job to land toward the upper end of the $7,000 to $18,000 range because of excavation and possible retaining work. Call (844) 797-7958 and we’ll walk the slope with you before quoting.
Can you come today to give me a paver driveway estimate?
In most cases, yes. We answer the phone with a live person 24/7, and we can often schedule an on-site estimate within a day or two, sometimes the same day. Call (844) 797-7958 to check availability for your address. The estimate and design consult are free.
Get Your Paver Driveway Priced Right
You don’t need a guess. You need a written number for your actual driveway, from a crew that backs the work with the 730-Day Done Right Promise and answers the phone whenever you call. Call (844) 797-7958 for a free estimate, and we’ll put the price in writing before a single paver comes off the truck.
Pricing reflects the Burbank market as of 2026. Groundwork Construction Co. of Burbank offers free estimates – call (844) 797-7958.
What Our Customers Say
"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."
- Angela Wong"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."
- Laura Bennett"Quality work and honest pricing. He is stretched across a few jobs at once so he is not always on site, though the carpenter who was there knew everything."
- Whitney Norris












