







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Much Does Concrete Driveway Installation Cost in Burbank?
Concrete driveway installation in Burbank typically costs $4,500 to $12,000 for a standard two-car driveway, with most homeowners landing around $7,800 for a 400 to 500 square foot pour with basic finishes. That range covers demolition of the old surface, grading, a compacted base, formwork, rebar or mesh, a 4 to 6 inch pour, and standard broom finish. Premium finishes, tight hillside access, and older Burbank lots with buried utilities push the number toward the top of the range or past it.
This is one of the projects where a vague bid costs you real money later. A driveway that cracks in the first rainy season because the base was too thin or the control joints were spaced wrong is a $4,500 lesson in reading the fine print. We price concrete driveways on a line-item basis so you can see exactly what your money is buying.
Key Takeaways
- Typical Burbank concrete driveway: $4,500 to $12,000, with a common mid-range project around $7,800.
- Stamped, colored, or exposed-aggregate finishes add $3 to $8 per square foot on top of the base pour.
- Burbank hillside access and older lots with clay soils are the two biggest local cost drivers.
- Most residential pours are completed in 3 to 5 days, including cure time before you can park on it.
- We back every driveway project with the 730-Day Done Right Promise and upfront pricing, no surprises.

Concrete Driveway Installation Cost Breakdown (2026)
Here’s what the numbers look like line by line for a typical Burbank residential driveway. Ranges assume a two-car driveway on a flat or gently sloped lot with reasonable truck access.
| Line Item | Typical Cost Range |
|---|---|
| Demolition and haul-away of existing surface | $600 – $2,000 |
| Excavation, grading, and compacted base | $800 – $2,200 |
| Rebar or wire mesh reinforcement | $300 – $800 |
| Formwork and layout | $250 – $600 |
| Concrete pour (4 to 6 inch slab, standard mix) | $1,800 – $4,500 |
| Finishing (broom, control joints, edging) | $400 – $900 |
| Sealer (optional but recommended) | $250 – $700 |
| Permits and inspections | $150 – $500 |
| Total installed | $4,500 – $12,000 |
Where that range lands depends mostly on square footage, thickness, and finish. Decorative options stack on fast. Stamped concrete runs $12 to $20 per square foot installed in Burbank, exposed aggregate sits around $10 to $16, and a colored integral pour with a border adds $3 to $6 per square foot over plain gray. For comparison, a paver driveway here runs $7,000 to $18,000, and asphalt driveway paving runs $3,500 to $9,000. Concrete sits in the middle and holds up better to Southern California sun than asphalt, which softens and fades noticeably faster.
What Affects Concrete Driveway Installation Pricing in Burbank
- Hillside and canyon access. Homes up in the Verdugo foothills or off a sharp canyon grade often can’t take a standard concrete truck at the pour point. When we have to pump the pour or run it down with buggies, add $500 to $1,500. Steep slopes also require step footings and more formwork to stop the slab from sliding.
- Older lots and buried utilities. Much of central Burbank was built in the 1920s through 1950s, and driveways from that era often cover old sewer laterals, gas stubs, and irrigation lines that were never mapped. We locate what we can, but cutting through or relocating a line during excavation adds cost. Better to know that up front than halfway through demo.
- Soil condition and clay content. Burbank’s clay soils expand and shrink with seasonal moisture, which is why we over-excavate and use a thicker compacted base than you’d need on stable inland ground. Skimping on the base is the single most common reason driveways crack here within a few years.
- Tree roots and root barriers. Mature ficus, sycamore, and jacaranda roots along the property line heave slabs and find joints. Root removal or a root barrier adds $400 to $1,200, and in some cases the city requires it near street trees.
- Thickness and mix design. A standard 4-inch slab works for cars. If you’re parking a heavy truck, an RV, or you’re doing commercial use, we go to 6 inches with a higher-strength mix, which adds roughly $2 to $4 per square foot.
- Permits and city requirements. The City of Burbank requires a permit for driveway replacement and can require a permit for new driveway approaches near the public right-of-way. If your driveway touches an alley or street crossing, expect an encroachment review. Permits run $150 to $500 and take a few weeks to clear, which we handle for you.
- Finish and detailing. A broom finish is included in the base price. Stamping, scoring in a decorative pattern, or a colored border moves the number up quickly. Current Burbank sunlight is brutal on faded finishes, so we recommend UV-stable color hardeners over simple dyes.

How to Save on Concrete Driveway Installation
Concrete isn’t a place to shave cost on the wrong items. Saving $300 on base compaction or reinforcement buying you a cracked slab in year three is a bad trade. The savings that actually make sense:
- Go standard gray broom finish. Skip stamping and decorative scoring. You’ll save $3 to $8 per square foot, which on a 450 square foot driveway is $1,350 to $3,600 back in your pocket.
- Handle demo yourself (sometimes). If the old surface is plain, thin, and already cracked, removing it yourself can save $600 to $1,200. Only do this if it’s safe; never touch a slab over buried gas or utility lines without confirming shutoffs first.
- Bundle with related work. If you’re also doing pavers, a walkway, or a fence, doing it all in one mobilization saves setup and haul-off costs. Our team handles Burbank service area projects from foundation to finish line.
- Time it right. Concrete prices move with material costs, and a non-emergency job booked off-peak can price better. Get on the schedule early.
- Seal it after cure. A $250 to $700 sealer every few years keeps the finish from spalling in Burbank’s sun and extends the drive far beyond the next reseal cycle. Cheaper than a replacement.
- Ask about financing. If the number is bigger than you expected, 0% financing for 18 months and $1,000 off projects over $10,000 makes it manageable without draining savings.
Every driveway estimate from us is free and comes with a written design consult. Call (844) 797-7958 and we’ll schedule it, no obligation.
FAQs – Concrete Driveway Installation Cost
How much does a concrete driveway cost in Burbank?
A typical residential concrete driveway in Burbank costs $4,500 to $12,000, depending on square footage, thickness, finish, and site access. Call (844) 797-7958 for an exact quote – estimates are free.
Is it cheaper to repair or replace a concrete driveway in Burbank?
Repair is usually cheaper for isolated cracks, spalling spots, and settled corners: typically $400 to $2,500 versus $4,500 to $12,000 for a full replacement. Once a driveway has widespread cracking, multiple sunken panels, or a failed base, patching is throwing money at a problem that returns within a year or two. We’ll tell you honestly which side of that line you’re on.
How much does a stamped or decorative concrete driveway cost in Burbank?
Stamped concrete runs $12 to $20 per square foot installed, so a 450 square foot driveway lands around $5,400 to $9,000. Colored integral pours with a border add $3 to $6 per square foot. It’s a premium finish on top of the base pour, not a different product.
Can you install a concrete driveway in a day?
No. A typical Burbank concrete driveway takes 3 to 5 days: one or two days of demo, grading, and base prep, one day for the pour and finish, then 2 to 3 days of cure before you can drive on it. Cold or damp weather extends cure time. Anyone advertising a full driveway done in one day is cutting corners somewhere.
How much does it cost to remove an old driveway in Burbank?
Demo and haul-away of an existing concrete driveway runs $600 to $2,000, with thicker slabs and tight access on the high end. That figure is already included in the $4,500 to $12,000 installed range above.
Does a concrete driveway need a permit in Burbank?
Yes, in most cases. The City of Burbank requires a permit for driveway replacement, and a separate encroachment review if the driveway meets a street or alley. Permit fees run $150 to $500 and take a few weeks to clear. We handle the paperwork so it doesn’t sit in line.
How long does a concrete driveway last in Burbank?
A properly built concrete driveway in this climate lasts 25 to 40 years with periodic sealing. The two things that shorten that lifespan fastest are an under-compacted base and skipped control joints. Both are cheap to do right and expensive to fix later.
Why Groundwork Construction Co. – From Foundation to Finish Line
Concrete is one of our seven core service lines, and we treat it the same way we treat a kitchen remodel or a roof: with a written scope, upfront pricing, no surprises, and a guarantee that actually covers workmanship. Our technicians have up to 12 years of experience, arrive background-checked and in uniform, and every project is backed by our 730-Day Done Right Promise. If it’s not done right, we make it right.
We use verified brand partners across every trade, and we’ve been serving local communities since 2014. Call us and a live person answers, 24 hours a day, 7 days a week. No voicemail, no waiting until Monday morning. From the first call to the final walkthrough, you’ll know exactly what’s happening, who’s coming, and what it costs. Call (844) 797-7958 for a free estimate and design consult today.
Pricing reflects the Burbank market as of 2026. Groundwork Construction Co. of Burbank offers free estimates – call (844) 797-7958.
Written by the team at Groundwork Construction Co. of Burbank.
What Our Customers Say
"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."
- Angela Wong"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."
- Laura Bennett"Quality work and honest pricing. He is stretched across a few jobs at once so he is not always on site, though the carpenter who was there knew everything."
- Whitney Norris












