







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterFence Repair Cost in Burbank, CA: What You’ll Actually Pay
Fence repair in Burbank typically runs $3500-$9000 for structural work, while smaller fixes land far lower: board replacement costs $8-$18 per board plus labor, a single post replacement runs $150-$300 with concrete, and a full section rebuild after wind damage costs $400-$800. The real driver in Burbank is seldom the boards. It’s what’s underneath them. Call (844) 797-7958 for a free estimate, and you’ll talk to a live person who can often scope the problem from a few photos before anyone drives out.
A homeowner calls about a few broken boards, maybe a leaning post. In Magnolia Park, that call sometimes uncovers a fence that was added without a permit years ago, sitting on footings that heaved in the clay soil. Repairing it right means more than swapping boards. Here’s what fence repair actually costs in Burbank, and why.
Key Takeaways
- Board replacement: $8-$18 per board plus labor.
- Single post replacement with concrete: $150-$300, depending on the depth Burbank soil requires.
- Section rebuild after Santa Ana wind damage: $400-$800 for a 6-8 foot section.
- Full structural reset of heaved posts: $600-$1,200 per run, including soil excavation and re-pour.
- Most of the cost surprise in Burbank comes from clay soil movement and unpermitted fence additions, not from the price of lumber.

Why Burbank Fences Cost More to Fix Than the Boards Suggest
Burbank sits in the hot, dry San Fernando Valley basin, and the flatland neighborhoods like Magnolia Park and the post-war residential flats are built on expansive clay soils. That clay swells when it’s wet and shrinks when it’s dry. Through a wet winter and a dry summer, a post footing can move up and down enough to crack the concrete collar holding it, loosen the post in its hole, and lean an entire run of fence.
Generic fence repair guides are written for stable soil. They don’t mention heave, because in most of the country it isn’t a factor. Here it’s the most common cause of a leaning fence that looks like wind damage but isn’t. When we dig out a heaved footing, we’re not just propping the post back up. We’re re-pouring it at a depth that accounts for the soil type under that specific yard, because the fix that lasts in Burbank isn’t the same fix that lasts in a sandy-soil climate.
The housing stock reinforces the point. Burbank’s Magnolia Park bungalows date to the 1920s through the 1940s, and their fences have been repaired, extended, and patched over many decades. Posts set in the original era often weren’t poured the way they are now. A leaning post on a 1935 property is a different repair than a leaning post on a 1965 ranch tract home in the hills, and the quote should reflect that.
The Wind Damage Pattern: What to Check Before You Get Quotes
Santa Ana wind events in Burbank damage fence sections in a predictable geometry. Solid-panel fences act as sails, and the failure point is almost always the post at the end of a run or at a corner, where the leverage is greatest. The middle panels often survive. The corner post takes the load and fails.
Knowing this changes how you scope a repair. If you call three contractors and describe “wind damage,” you’ll get three different guesses about how much fence needs replacing. If you can point to the corner post and the failed footing, the quotes get accurate and comparable. Before you call anyone, walk the fence line and note:
- Which posts are actually leaning versus which panels are just loose.
- Whether the lean is at a corner or the end of a run (wind leverage) or in the middle of a straight run (likely soil heave).
- Cracks in the concrete at the base of a post, which point to footing failure rather than board failure.
- Any section that was added onto the original fence, which may never have had a permit.
That last point matters more in Burbank than most homeowners expect. The city’s building-safety enforcement is aggressive, and its permit system flags fence repairs on properties with known code open items. A licensed contractor who pulls a repair permit on an older property may surface an unpermitted fence addition that has to be remediated before the repair can proceed. That’s a real cost, and it’s also why some lowball quotes come from contractors who simply don’t pull permits. Skipping the permit doesn’t make the problem go away. It pushes it onto you.

What Fence Repair Costs in Burbank, Line by Line
Here’s how the numbers break down for the repair types we see most often in Burbank. These ranges include materials and labor for a standard wood or composite fence; a full Fence Installation with new posts or a different material like Boral composite or PGT vinyl will shift the numbers, and a fence that’s failing everywhere may cost less to replace than to keep patching.
| Repair Type | Typical Burbank Cost |
|---|---|
| Board replacement | $8-$18 per board plus labor |
| Single post replacement with concrete | $150-$300 per post |
| Section rebuild after wind damage (6-8 ft) | $400-$800 per section |
| Full structural reset of heaved posts | $600-$1,200 per run |
| Full repair project (multiple sections, new footings) | $3500-$9000 |
Two variables push a job toward the high end. The first is footing depth. Burbank’s clay soil may require deeper excavation and a larger concrete pour than a standard repair, and that’s labor and material you can’t shortcut. The second is permit remediation for an unpermitted addition, which adds inspection and correction time on top of the repair itself.
We quote home fence work with upfront pricing, the number you see is the number you pay, and large repairs over $10,000 qualify for $1,000 off plus 0% financing for 18 months. Smaller repairs are quoted straight, with no surprises after the crew starts.
How to Compare Fence Repair Quotes in Burbank
The cheapest quote is rarely the cheapest outcome. What separates a repair that holds through the next Santa Ana event from one that fails by spring is usually invisible on the invoice: whether the contractor pulled a permit, whether they dug and re-poured the footing or just braced the post, and whether the soil conditions were factored into the depth. When you compare quotes, ask:
- Will you pull a repair permit, and have you checked the property for open code items?
- Are you re-pouring the footing or just resetting the post in the existing hole?
- Did you account for the clay soil when setting the depth?
- What’s the workmanship guarantee, and how long does it run?
Groundwork Construction Co. of Burbank backs all structural fence work with the 730-Day Done Right Promise, one of the longest workmanship guarantees in the residential construction space. If a footing we poured shifts or a repair fails, we come back and make it right. Our technicians have up to 12 years of experience, they arrive background-checked and in uniform, and qualifying projects are covered by our standing promotions: a free project estimate and design consult, $1,000 off projects over $10,000, and 0% financing for 18 months. Calls are answered by a live person 24/7, which matters when a fence comes down at ten o’clock on a Sunday night during a wind event.
FAQs
Fence repair in Burbank runs from about $8-$18 per board for simple replacements up to $3500-$9000 for a full repair with new footings on multiple sections. Single post replacements cost $150-$300 each, and a section rebuild after wind damage runs $400-$800. The biggest cost variable here is whether the posts have heaved in Burbank’s clay soil, which turns a board swap into a footing repair. Call (844) 797-7958 for an exact quote, and estimates are free.
Clay soil heave is the most likely cause. The expansive clay in Burbank’s flatland neighborhoods like Magnolia Park swells with winter moisture and shrinks through the dry summer, and that vertical movement cracks the concrete footing and tilts the post. It looks like wind damage but the fix is different: the footing has to be excavated and re-poured at the right depth, not just braced. Call us and we’ll tell you which failure you’re looking at.
In many cases yes, and Burbank’s permit system flags repairs on properties with known code open items, so a repair can surface an unpermitted fence addition that has to be corrected first. A contractor who skips the permit is passing that risk to you. We pull the permit and handle the remediation so the repair is done right and stays done. Call (844) 797-7958 to talk through your property.
Repair is usually cheaper when the posts and footings are sound and only boards or one section are damaged. Replacement makes more sense when footings have failed across the whole run, or when an older fence needs permit remediation anyway. A repair in the $3500-$9000 range often costs less than a full installation, but we’ll give you both numbers so you can decide. Call (844) 797-7958 for a free estimate.
Get a Straight Answer on Your Fence Repair Cost
Whether it’s a handful of boards, a heaved corner post, or a full structural reset, Groundwork Construction Co. of Burbank will scope the repair, quote it upfront, and back it with the 730-Day Done Right Promise. Call (844) 797-7958 today for a free estimate. A live person answers, day or night.
Written by the team at Groundwork Construction Co. of Burbank, serving Burbank, CA.
What Our Customers Say
"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."
- Angela Wong"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."
- Laura Bennett"Quality work and honest pricing. He is stretched across a few jobs at once so he is not always on site, though the carpenter who was there knew everything."
- Whitney Norris












