







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat Is a Curbless Shower? A Straight Answer for Burbank Homeowners
A curbless shower is a walk-in shower with no raised lip at the entry – the bathroom floor runs level right into the shower zone, with the water managed by a slight slope to a linear drain instead of a curb. That’s the definition. What most explainers leave out is that a curbless shower is only as good as the floor beneath it, and in a 1950s Burbank ranch home that floor may have shifted enough to turn a linear drain installation into a serious framing conversation. Achieved correctly, a curbless shower is one of the most accessible, watertight, and photogenic upgrades you can make to a Burbank bathroom. Call (844) 797-7958 to talk through your layout with a live person any hour.

Why Burbank’s Housing Stock Makes Curbless Showers Harder Than the Videos Suggest
Walk through Magnolia Park or the Rancho Equestrian district and you’re walking through Burbank’s 1920s-to-1940s Spanish Revival and Craftsman bungalows – many with original lath-and-plaster walls and subfloors that have spent decades settling on pier-and-beam foundations. Head toward the hills and the post-war flats near downtown and you hit 1950s-60s ranch tract homes on slab. Neither foundation type was built with a zero-threshold shower in mind, and both present the same core problem: a curbless shower needs a controlled slope to a drain, and a settled floor doesn’t give you one for free.
The typical slope-to-drain requirement is 1/4 inch per foot. On a four-foot run that’s a full inch of fall, and it has to be there without pooling, without a reverse slope, and without the tile lipping at the entry. When the existing subfloor is out of level – common on a 70-year-old Burbank slab that’s cracked or a pier-and-beam floor with a sagging joist – the slope has to be built back with self-leveling compound, sistered joists, or a pre-sloped shower pan system. That’s framing and prep work, not tile work, and it’s the part most curbless shower guides skip entirely.
What has to happen before anyone quotes your shower
Before a real number means anything, someone needs to put a level on that floor and a hand on the joists. Here’s what we assess first:
- Subfloor level and deflection – how far out of level is the floor, and will the joists carry a tile assembly without flexing.
- Foundation type – slab versus pier-and-beam in a Burbank bungalow changes the prep and the cost.
- Existing plumbing location – a linear drain wants to sit at one edge; moving the drain line is real work.
- Waterproofing plan – a bonded membrane or a foam shower system, specified before demo, not after.
At Groundwork Construction Co. of Burbank, that assessment is built into our upfront pricing process – the number you see is the number you pay. It isn’t discovered mid-demo when the floor opens up and the budget does too. Our technicians have up to 12 years of experience reading exactly these older Burbank floors.
Waterproofing: The Part California Code Won’t Let You Skip
Under California building code, a curbless wet area is a shower like any other – it requires a waterproofing membrane that ties the pan, the walls, and the drain flange together into one continuous barrier. Curbless showers actually raise the stakes, because with no curb there’s no secondary containment if the membrane fails. Water finds the path of least resistance, and in a zero-threshold build that path runs straight into the adjacent floor.
This is where we see the most failures from cut-rate or unlicensed contractors in Burbank: a painted-on membrane applied too thin, a missed pan liner at the drain, or no pre-slope under the liner at all. It looks fine at the walkthrough. The damage shows up two or three years later as a soft spot in the hallway floor or a stain on the ceiling below. That’s why we specify quality products at the substrate level – the membrane and setting materials decide whether your shower is watertight at year one and still watertight at year three. We pair that with finish brands like Moen fixtures and Kohler or Silestone surfaces so the visible layer holds up to the warranty behind it. Every project we complete is covered by our 730-Day Done Right Promise: if it isn’t done right, we make it right.

What Does a Curbless Shower Cost in Burbank?
A curbless shower installed as part of a bathroom remodel in Burbank typically runs $9,000 to $28,000 depending on the scope – and a shower-only conversion lands lower within that band. The range is wide because the floor prep drives it. A level slab in a newer hillside home is a different job than a settled pier-and-beam floor in Magnolia Park.
| Scope | Typical Burbank range |
|---|---|
| Full bathroom remodel (includes curbless shower) | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement | $3,000 – $8,500 |
| Bathroom vanity installation | $800 – $3,000 |
No-hassle upfront pricing keeps that honest. We also offer 0% financing for 18 months and $1,000 off projects over $10,000, which matters when you’re folding a full curbless conversion into a larger Bathroom Remodeling project. For the deeper dive on how a full bathroom scope comes together in this city, see our Bathroom Remodeling in Burbank page.
Why Curbless Showers Fit How Burbank Lives
Burbank is a company town built on a soundstage economy, and a lot of the homeowners we work with here work in entertainment and entertain at home. A curbless shower photographs and films beautifully – a clean, uninterrupted tile plane with no lip breaking the line – which is a real reason it shows up in so many camera-ready interiors around the Rancho Equestrian and Magnolia Park areas. It’s also genuinely easier to age into: no step to catch a foot, no threshold to trip on, and a floor you can roll a walker or wheelchair straight into.
The rest of the appeal is simple maintenance. A curb is a lip where water sits and soap scum collects. Take it away and the shower drains clean, which helps in Burbank’s hot, dry summers when everything dries fast and dust settles on every horizontal surface.
FAQs
A curbless shower has a completely flat entry with no raised lip, while a low-curb shower keeps a small threshold of an inch or two that still contains water by height. Curbless gives you the seamless, accessible floor; low-curb is cheaper and easier to build on an uneven floor. If your Burbank home has a significantly out-of-level subfloor, a low-curb design sometimes gets you most of the look without the full framing conversation – call (844) 797-7958 and we’ll tell you honestly which fits your floor.
Yes, usually – the waterproofing and floor prep cost more on a curbless build because there’s no curb to act as backup containment, so the membrane and slope have to be done right the first time. That added labor and material is why a walk-in shower installation runs $4,500 to $12,000 in Burbank. Estimates are free, so call (844) 797-7958 for an exact number on your floor.
Yes, a curbless shower can go on a slab, but it often means cutting into the slab to recess the drain and building the slope back up with a pre-sloped pan – and that recessed approach is what makes a slab install harder than it looks. Post-war ranch homes on slabs near downtown Burbank are common, and we assess the slab before quoting. Call (844) 797-7958 to get your floor checked first.
A curbless shower in Burbank generally costs $9,000 to $28,000 as part of a full bathroom remodel, or $4,500 to $12,000 for a shower-only installation, with floor prep as the biggest swing factor. Call (844) 797-7958 for an exact quote – estimates are free and the pricing is upfront.
When to Call a Pro Before You Demo Anything
A curbless shower is a waterproofing and framing job wearing a tile job’s clothes. On older Burbank floors, getting the slope, the membrane, and the drain right takes a trained eye – this isn’t a weekend project, and a missed membrane shows up years later. If you’re weighing a curbless conversion, we’ll put a level on your floor and give you a real answer. If you’d rather have it looked at, Groundwork Construction Co. of Burbank offers a no-pressure assessment in Burbank – call (844) 797-7958. Live person, 24/7.
Written by the team at Groundwork Construction Co. of Burbank, serving Burbank, CA.


