







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterDoor Installation Cost in Burbank, CA: What You’ll Actually Pay
Interior door installation in Burbank typically runs $350 to $1,100 per door installed, while exterior door replacement lands between $900 and $2,400 once code compliance is factored in. The gap between those two numbers is the story of this city: Burbank enforces egress, fire-rating, and threshold requirements on exterior doors that most neighboring cities wave through, and that enforcement sits on your invoice whether a quote sheet shows it or not. Call Groundwork Construction Co. of Burbank at (844) 797-7958 for a free estimate with the real number on it.
Key Takeaways
- Interior doors: roughly $350-$1,100 per door, installed.
- Exterior doors: roughly $900-$2,400, with fire-rated assemblies adding $300-$600 in material on WUI-zoned hillside properties.
- Post-war ranch homes in the flats often carry non-standard rough openings, adding framing labor online calculators never include.
- Permits are required when a door change affects size or a fire-rated assembly, and skipping one surfaces at resale.
- Combining a door swap with a larger exterior project can trigger $1,000 off projects over $10,000.

Why a $400 Door Becomes an $1,800 Project Here
The door isn’t the expensive part. Burbank’s building safety division is aggressive about the assemblies around it, and that’s where budgets move. Take a hillside home up above Glenoaks: Wildland-Urban Interface zoning means an exterior door on the fire-exposure side has to be a rated assembly, not the builder-grade slab from the home center. That’s $300 to $600 in material before anyone touches a hinge. The Santa Ana wind events that push fire risk into the Verdugo edges are the reason that requirement exists, and it isn’t going anywhere.
Then there’s the flats. The post-war ranch homes from the 1950s and 60s scattered through the Burbank basin were framed to whatever dimension the crew had on hand that Tuesday. Rough openings are frequently non-standard. A door that measures 32 inches on the sticker may need custom shimming, a planed jamb, or actual framing modification to sit plumb and latch clean. That’s a labor line most online cost calculators omit entirely, and it’s the line that turns a tidy estimate into a change order when a big-box installer discovers it mid-job. We measure the opening before we quote, so the number you see is the number you pay.
It’s also worth saying plainly: Burbank requires a permit for exterior door replacements that change the door size or affect a fire-rated assembly. Skipping it is cheap right up until resale, when a buyer’s inspector asks a question nobody can answer. The permit cost is modest. The correction cost is not.
What Door Installation Costs in Burbank, Line by Line
These are the ranges we quote in this market. The spread reflects door material, hardware, and how much framing the opening needs once we get the trim off.
| Item | Typical Range |
|---|---|
| Interior door installation (per door, installed) | $350-$1,100 |
| Exterior door installation (standard, installed) | $900-$1,800 |
| Exterior door with fire-rated WUI assembly (hillside) | $1,400-$2,400 |
| Fire-rated assembly material premium | $300-$600 |
| Rough opening modification / custom framing | $250-$700 |
| Permit for exterior door change or fire-rated assembly | $150-$450 |
| Door hardware and finish upgrades | $80-$400 |
For context on how door work fits next to a bigger exterior job, the numbers in this market are consistent: Windows & Doors projects like a full window replacement generally run $4,500-$15,000, and impact-rated units in fire-exposure zones land at $8,000-$25,000. Homeowners who bundle a couple of exterior doors into that scope often find the combined project clears the $10,000 threshold, which brings the $1,000 off into play.

Interior vs. Exterior: The Two Equations
Interior doors are mostly a finish decision. Hollow-core slabs keep the budget low; solid-core and pre-hung units cost more but hang faster and quieter. The labor is predictable unless the existing frame is out of square, which happens plenty in the Burbank service area‘s older stock.
Exterior doors are a building-envelope decision. In this climate they have to survive dry Valley summers, the occasional winter rain that finds every gap in stucco and trim, and the wind-driven grit that comes with a Santa Ana event. That’s why we install Therma-Tru and Mr-Glass exterior units: the finish consistency holds up, and the warranty is backed by a manufacturer who stays in business. The door has to be built to last and backed in writing, and so does the installation.
Common Scenarios We See in Burbank
A Magnolia Park bungalow with an original 1920s opening. These homes often sat through an unpermitted addition or a converted garage somewhere along the way, and pulling a door permit can surface a wall that isn’t framed the way the county thinks it is. We plan for that discovery rather than treating it as a surprise.
A hillside ranch above Glenoaks wanting a new front door. The door needs a rated assembly, the threshold has to sit correctly against the fire-resistant detailing, and the permit has to be pulled before the old unit comes out. Fire clearance scrutiny in the Verdugo foothills is among the tightest in the region, and we build the quote around it from the first measurement.
A studio-adjacent project with a hard deadline. Burbank runs on a soundstage economy, and plenty of clients here work in entertainment and need permit-ready, camera-friendly results on tight turnaround. That means the permit gets filed early, the door is ordered against a real lead time, and the install doesn’t slip.
Choose Top-Tier Doors, or Judge the Install Yourself
We work with Andersen and Marvin for exterior doors. What that means practically: lead times are real and published up front, warranties run through the manufacturer rather than a big-box return desk, and finishes across a multi-door project match because they come from the same product line. Buying a door at a warehouse store and scheduling a separate installer splits the accountability in half, and nobody owns the gap when something’s off. Our technicians have up to 12 years of experience, every one is background-checked and arrives in uniform, and every door we hang is covered by the 730-Day Done Right Promise. If it’s not done right, we make it right.
We also handle broad exterior work when the door is part of a larger scope: exterior door installation, front door replacement, sliding glass door installation, and patio door installation all run through the same crew and the same guarantee. If the project grows, so do we: home additions and ADUs, roofing, and kitchen remodeling are all on the same license and the same promise.
Financing helps with the bigger combos. We offer 0% financing for 18 months, which spreads a project across a realistic timeline, and $1,000 off projects over $10,000 on top of it. A door replacement bundled with a bathroom remodel, a fence installation, or driveway and paver work is a natural way to clear that threshold in this renovation-heavy market. Back to the home page for the full picture of what we cover.
FAQs
Interior door installation in Burbank runs $350-$1,100 per door, and exterior door installation runs $900-$2,400 depending on whether a fire-rated assembly is required. Hillside homes in WUI zones carry the higher end because the rated assembly adds $300-$600 in material. Call (844) 797-7958 for an exact quote, and the estimate is free.
Yes, Burbank requires a permit for exterior door replacements that change the door size or affect a fire-rated assembly. The permit itself is modest, usually $150-$450, and pulling it protects you at resale. Skipping it creates a problem that surfaces when a buyer’s inspector looks at the assembly.
Repair is cheaper when the frame and threshold are sound and the issue is hardware, weatherstripping, or finish. Replacement wins when the assembly is out of code, the rough opening is failing, or the fire rating is missing on a hillside property. Call (844) 797-7958 and we’ll tell you which side of that line you’re on, with a free estimate either way.
Many standard interior door swaps and pre-hung exterior replacements can be completed in a single visit once the door is on hand. Fire-rated hillside assemblies and units requiring rough opening modification take longer because the permit and the framing have to line up first. Call (844) 797-7958 and we’ll give you a real timeline for your door.
Get a Straight Number on Your Door Project
Bring us the opening and we’ll bring the measurement, the permit path, and an upfront price with no surprises at the end. Free project estimate and design consult included. Calls are answered by a live person 24/7, so you’re not waiting until Monday. Reach Groundwork Construction Co. of Burbank at (844) 797-7958.
Written by the team at Groundwork Construction Co. of Burbank, serving Burbank, CA.
What Our Customers Say
"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."
- Angela Wong"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."
- Laura Bennett"Quality work and honest pricing. He is stretched across a few jobs at once so he is not always on site, though the carpenter who was there knew everything."
- Whitney Norris












