







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat It Really Costs to Fence a Backyard in Burbank, CA
Fencing a backyard in Burbank runs $3,500 to $9,000 for most residential lots, and wood board-on-board is usually the biggest slice of that range. If your lot sits on a hillside street or your property line touches an older Magnolia Park bungalow, plan for the high end. The number that surprises people here isn’t the fence itself. It’s what a permit uncovers once the city starts looking. Call Groundwork Construction Co. of Burbank at (844) 797-7958 for a free estimate, and we’ll price the fence and the permit reality together.
Key Takeaways
- Standard Burbank backyard fence: $3,500-$9,000, material and lot conditions dependent.
- Fence permits over 6 ft, and all hillside-lot permits, are charged separately by the City of Burbank.
- Verdugo foothills soil can require deeper concrete footings than flatland lots.
- Unpermitted garage conversions and additions often share a wall or setback with your fence line, which can trigger a mandatory lot-line survey.
- Quotes that skip permit fees and soil checks are low-balling you by design.

The Burbank Fence Bill Nobody Quotes You Upfront
Most Burbank homeowners budget $3,500-$8,000 and then watch it climb. The fence didn’t change. The permit pulled the curtain back on something the previous owner never disclosed. This is the part of backyard fencing in Burbank that separates a real estimate from a sales number.
The city charges for fence permits separately once you cross 6 feet in height, or any time the work touches a hillside lot. That’s a line item, not a rounding error, and every quote you compare should show it. On top of that, Burbank’s postwar flatland stock is full of converted garages and back additions that were never permitted. When your proposed fence line runs along one of those, the city may require a lot-line survey before the first post goes in. We’ve seen survey and setback corrections add four figures to projects that looked simple on paper.
None of that is a reason to avoid the permit. It’s a reason to get a quote that assumes the inspection will happen. Our Fence Installation in Burbank work is priced with permits, demo, and disposal built in from the start.
How Burbank’s Ground and Housing Stock Change the Price
Soil matters more here than in most of the Valley. Hillside streets above the valley floor sit on Verdugo foothills ground that can force deeper concrete footings, and the same hillside lots face the tightest fire-clearance and grading scrutiny in the region. Deeper footings mean more concrete, more digging, and more labor. The fence looks the same at the end; the number underneath it doesn’t.
Down on the flats, the driver is what’s already there. Magnolia Park bungalows from the 1920s through the 1940s often come with original hardscape right where the new fence line wants to go, plus established roots and old footing stubs. Removing that concrete is real work. We price it as a line item rather than burying it in a vague “site prep” charge.
Then there’s the studio-town rhythm. Burbank runs on a soundstage economy, and plenty of our fence customers work in entertainment and need the yard buttoned up between productions, on a timeline that doesn’t move. We plan around it. Our technicians have up to 12 years of experience, and every crew arrives background-checked and in uniform.

Fence Cost by Type for Burbank Lots
Here’s how the ranges break down for a typical Burbank backyard. Use these as your budget baseline, then adjust for the lot conditions above.
| Fence Type | Typical Burbank Cost |
|---|---|
| Wood board-on-board (most common in Magnolia Park bungalow lots) | $3,500-$9,000 |
| Vinyl | $3,500-$9,000 |
| Aluminum | $4,000-$10,000 |
| Wrought iron (hillside homes with HOA-adjacent aesthetic standards) | $4,000 and up, set by the survey and footing scope |
Wood board-on-board is the Burbank default because it suits the bungalow lots and holds up to the valley’s dry heat. Vinyl costs about the same up front and asks less of you over time. Aluminum and wrought iron tend to show up on hillside properties where aesthetic standards run tighter. We work with Barrette and Master Halco materials, so the hardware and panels behind the fence match the quote, not whatever’s on hand that week.
Why a Low Quote Usually Means a Missing Line Item
A contractor quote that omits permit costs or skips the soil assessment is almost always low-balling. On a standard Burbank residential lot, that gap commonly runs a few thousand dollars once the permit, survey, and footing reality land. The bid looks $2,000 cheaper on paper and costs you $2,000 more after the first inspection.
That’s why our pricing is upfront and the number you see is the number you pay. We estimate the permit fee, the demo, and the disposal before you sign. If the job runs into an unpermitted addition that needs a survey, we tell you before we start, not after. Every project is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That’s built to last, backed in writing.
Budget is the other half of the conversation. We offer 0% financing for 18 months, plus $1,000 off projects over $10,000, so a fence plus the corrections it uncovers stays affordable without dipping into savings. For the wider picture of how fencing fits your property, see our main Fence Installation page or start at home.
FAQs
Backyard fencing in Burbank typically costs $3,500 to $9,000 for wood board-on-board or vinyl, with aluminum running $4,000 to $10,000 and wrought iron priced by scope. Hillside lots and properties needing a lot-line survey land at the high end. Call (844) 797-7958 for an exact quote – estimates are free.
Yes, inmost cases you’ll need a permit, and the City of Burbank charges separately for fence permits over 6 feet in height or on hillside lots. Skipping the permit is the expensive shortcut here, because the inspection is also what surfaces unpermitted additions along your fence line. We build permit costs into the quote so there are no surprises.
It usually goes up because the permit pulled back the curtain on something the previous owner never disclosed – a converted garage, an unpermitted addition sharing your setback, or a lot line that needs a survey. On a standard Burbank lot that gap commonly runs a few thousand dollars. Our quotes assume the inspection will happen, so the number you see is the number you pay.
Yes. Hillside fences above the valley floor need deeper concrete footings and must meet fire-clearance and grading standards that flatland lots don’t face. We assess the soil and the footing depth before pricing, so the quote reflects the hill. Calls are answered by a live person 24/7 – reach us at (844) 797-7958.
Get Your Fence Priced Right the First Time
Before you commit to a fence in Burbank, get an estimate that accounts for the permit, the soil, and whatever your lot is hiding. Groundwork Construction Co. of Burbank puts all of it in writing. Free estimate and design consult, upfront pricing, 0% financing for 18 months. Call (844) 797-7958 today.
Written by the team at Groundwork Construction Co. of Burbank, serving Burbank, CA.
What Our Customers Say
"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."
- Angela Wong"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."
- Laura Bennett"Quality work and honest pricing. He is stretched across a few jobs at once so he is not always on site, though the carpenter who was there knew everything."
- Whitney Norris












