







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterAsphalt Driveway Cost in Burbank, CA: What You’ll Actually Pay
Asphalt driveway paving in Burbank runs $3,500 to $9,000 for a typical residential driveway, while a full driveway replacement (demo, grading, new base and surface) lands between $5,000 and $14,000. Annual sealing adds $250 to $700. But here’s the number most pricing guides won’t give you: in Burbank’s valley heat, a cheap 2-inch asphalt pour can cost you far more over 12 years than a properly built one. Call (844) 797-7958 for a free estimate with no surprises on the final number.
The Problem You’re Probably Staring At Right Now
Maybe your driveway has that spiderweb of surface cracks that showed up two summers ago and keeps spreading. Or the edges near the garage apron are raveling, crumbling into grit you sweep up every week. If you’ve had a contractor tell you “it just needs a reseal,” and then watched the cracks come back within 18 months, you’re not imagining things. That pattern is common in Burbank, and the reason is the climate, not bad luck.
Asphalt is held together by a bitumen binder loaded with oils that keep it flexible. Those oils oxidize and evaporate. In a coastal city, that breakdown happens slowly. In the San Fernando Valley basin, where asphalt surface temps climb well past 140°F on an unshaded July afternoon, the oxidation clock runs much faster. That difference changes the real cost math completely.

Why Asphalt in Burbank Ages Faster Than Any National Average Predicts
The standard industry line is that asphalt lasts 20 to 25 years with resealing every 3 to 5 years. That’s roughly accurate for mild climates. Burbank isn’t mild. Sustained summer heat in the 95°F to 105°F range accelerates binder oxidation, and a driveway poured with a standard binder (no polymer modification) will typically start showing surface cracking and raveling within 3 to 5 years instead of the 7 to 10 years a national average assumes. The oils dry out, the surface loses flexibility, and every expansion-contraction cycle opens those hairline cracks a little wider.
Here’s the part that changes your spreadsheet: a Burbank asphalt driveway that competes with San Diego’s 20-year lifespan often needs resealing every 2 years instead of every 4, and can need full replacement around the 12-year mark. On a $6,000 install, that’s roughly $250 to $700 every two years for sealing, plus a replacement bill at year 12. Run that against a concrete driveway that doesn’t need resealing at all and typically holds up for 20 years or more. The upfront gap narrows fast. We’ll walk through this exact comparison for your driveway during a no-cost site assessment, with your actual square footage.
Why the “Entry Price” Asphalt Bid Usually Costs More
Many asphalt quotes you’ll get in Burbank are built on a 2-inch compacted asphalt layer. That spec is inexpensive to pour, easy to advertise, and it fails early in valley heat. Groundwork Construction Co. of Burbank quotes an oil-modified base layer and a minimum 3-inch compacted asphalt depth as standard. Thicker, properly modified asphalt resists oxidation and load stress far better, and it’s the single biggest factor in whether your driveway hits 12 years or 20.
That difference matters on the tight, graded lots you find in the Verdugo foothills, where drainage has to move water off the surface fast during winter rain. A thin pour on a poorly compacted base is where puddling and edge failure start. If you want to see how a paver surface compares on hillside drainage, our page on Driveway & Pavers in Burbank covers that in detail.
Asphalt Driveway Cost Breakdown for Burbank Homeowners
These are the ranges we quote for Burbank projects. Final numbers depend on square footage, access, existing base condition, and how much demo and grading the job needs.
| Line Item | Cost Range |
|---|---|
| Asphalt driveway paving (new surface) | $3,500-$9,000 |
| Full driveway replacement (demo + grading + new) | $5,000-$14,000 |
| Driveway sealing (per application) | $250-$700 |
| Concrete driveway installation (comparison) | $4,500-$12,000 |
| Paver driveway installation (comparison) | $7,000-$18,000 |
The Driveway & Pavers service covers all three surfaces, and we’ll quote them side by side so the comparison is real, not rhetorical. If your project runs over $10,000 (common on full-scope replacements with grading), our standing $1,000 off projects over $10,000 applies. Combined with 0% financing for 18 months, the monthly payment on a failing asphalt slab replaced with concrete or pavers often lands close to what you’d spend resealing asphalt every two years anyway. And every project carries our 730-Day Done Right Promise: if it’s not done right, we make it right.

What “Done Right” Actually Requires on a Burbank Driveway
The list below is what separates a driveway that holds up from one that looks good for two summers and then tells the truth. Our technicians have up to 12 years of experience, and every crew is background-checked and arrives in uniform. Materials come from verified suppliers like Quikrete and Sakrete for the base and mix work, so you’re not getting whatever was cheapest that week.
- Proper subgrade prep. Compaction of the native soil before anything goes down. Skipping this is why driveways settle and crack.
- Oil-modified binder, not standard. This is the upgrade that fights Burbank’s oxidation problem directly.
- 3-inch minimum compacted asphalt depth. Not the 2-inch entry spec.
- Real edge support. Graded shoulders or a curb so the asphalt doesn’t crumble at the sides.
- Drainage planned for flash runoff. Winter rain in Burbank can move fast off hillside lots. The surface slope has to shed it away from the foundation.
Common Local Scenarios We See
In the flatland blocks around Magnolia Park, we regularly see driveways abutting 1920s and 1940s bungalows where the original approach was undersized and drainage runs toward the garage. Sorting that out means regrading the approach, not just repaving. Up in the hills and Verdugo foothill streets, the grading scrutiny is some of the tightest in the region, and driveways often sit on an incline with tight turnarounds. On those lots, asphalt’s fire performance is a secondary consideration too: during red-flag conditions, a hot asphalt surface next to vegetation clearance zones can complicate defensible space compliance. Non-combustible concrete or pavers are worth weighing on a hillside edge.
Permits are another layer. Burbank enforces building safety aggressively, and a full driveway replacement that changes the approach, drainage, or slope may need a permit that a simple reseal doesn’t. We’ll tell you upfront which category your job falls into. For larger-site work that extends beyond the driveway, our home page shows the full scope of what we handle, from kitchen remodels to roof replacements to ADU construction, all under one contractor and one guarantee.
Do You Need to Replace or Just Reseal?
Reseal if the asphalt is still structurally sound: no alligator cracking, no soft spots, no edge crumbling, and it’s been more than two years since the last seal. Replace if you’re seeing structural cracks that run through the base, sunken areas, or raveling at the edges. In Burbank heat, past the 10 to 12 year mark on a thin pour, patching is usually money spent on a driveway that’s already finished. We’ll tell you honestly which one you’re looking at.
FAQs About Asphalt Driveway Cost in Burbank
Asphalt driveway paving in Burbank typically costs $3,500 to $9,000, and a full replacement with demo and grading runs $5,000 to $14,000. Sealing adds $250 to $700 per application. Call (844) 797-7958 for an exact quote; estimates are free.
Valley heat accelerates asphalt binder oxidation, drying out the oils that keep the surface flexible, so standard asphalt in Burbank can start cracking within 3 to 5 years instead of the 7 to 10 years a mild climate allows. An oil-modified binder and 3-inch compaction depth are the two biggest defenses. Call (844) 797-7958 to have your driveway assessed.
Often yes. Asphalt costs less upfront but needs resealing every 2 years in Burbank heat and may need full replacement around year 12, while concrete skips resealing and typically holds for 20 years or more. With $1,000 off projects over $10,000 and 0% financing for 18 months, the monthly difference is smaller than the sticker price suggests. Call (844) 797-7958 for a side-by-side quote.
Yes, but hillside drives in the Verdugo foothills need careful grading and drainage planning, and fire-clearance rules can affect what surface makes sense near vegetation zones. Non-combustible concrete or pavers are sometimes the better long-term fit. Call (844) 797-7958 to talk through your specific lot.
Get a Straight Answer on Your Driveway Cost
Upfront pricing, no surprises. Book a free estimate and design consult with Groundwork Construction Co. of Burbank and we’ll measure your driveway, show you the asphalt-versus-concrete math for your actual square footage, and give you a written number covered by the 730-Day Done Right Promise. Calls are answered by a live person, 24/7. Call (844) 797-7958.
Written by the team at Groundwork Construction Co. of Burbank, serving Burbank, CA.
What Our Customers Say
"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."
- Angela Wong"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."
- Laura Bennett"Quality work and honest pricing. He is stretched across a few jobs at once so he is not always on site, though the carpenter who was there knew everything."
- Whitney Norris












