







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Burbank Homeowners Choose PGT Construction
We provide independent PGT construction service in Burbank – window and door repair, impact glazing replacement, re-sealing, roller and track work, and full replacement of PGT units that no longer serve the house. What makes our PGT work different is that our technicians actually understand the hardware: WinGuard sliders, PremierVue aluminum frames, pile seals, anchor corrosion at the stucco perimeter. We are an independent PGT service provider, not affiliated with or authorized by the manufacturer, and we say so plainly. Our technicians have up to 12 years of experience, and every PGT project we touch is covered by the 730-Day Done Right Promise. Call (844) 797-7958 for a free estimate on your PGT work in Burbank.
Why Trust Groundwork Construction Co. of Burbank for Your PGT Construction?

PGT builds its windows and doors around Florida-grade impact codes, and that engineering changes how the product needs to be handled. Impact glazing units can’t be swapped for ordinary glass. Fasteners, anchors and perimeter seals carry more load than standard residential units because the assembly is designed to hold under wind-driven debris. Our technicians have worked on PGT WinGuard aluminum and vinyl lines long enough to read the symptoms correctly: a fogged pane is a glazing seal failure, a dragging slider is a roller or track problem, water at the frame is an anchor and caulk problem, and each has a different fix.
We source OEM or exact-match PGT components wherever they exist, and we never substitute a non-impact pane into an impact frame. On non-structural wear items – rollers, pile seals, weatherstripping, handles – we’ll use quality aftermarket hardware when the OEM part is backordered, and we tell you when we’re doing it. All work is warranty-safe: we repair the way the unit was built so an existing PGT warranty stays intact. We’re proud to serve the Burbank community, answer calls with a live person around the clock, and put a real number in writing before work begins.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common PGT Construction Problems We Fix in Burbank
Here’s what we actually see on Burbank PGT installations, and why each one happens:
- Gapping weatherstripping and pile seals on WinGuard sliders. The pile seal along the sash wears flat within a few years of regular use, and once it compresses, wind-driven rain and fine dust push past the sash into the track. In Burbank’s dry, dusty summers followed by hard winter rain, that gap shows up fast as water staining inside the track and a draft you can feel by hand.
- Roller and track wear on heavy impact sliding glass doors. Impact glass is significantly heavier than standard glazing, so the rollers on a WinGuard sliding door take more load per opening. When they wear flat or a track gets a nick, the panel binds, jumps the track, or refuses to latch cleanly. The frame is almost never the culprit.
- Fogging between panes in insulated impact units. When the seal or spacer fails, moisture gets trapped between the panes, and you see a haze or a milkiness that won’t clean off. This is a glazing problem, not a frame problem – the glass unit is what fails, and replacing the whole assembly wastes a perfectly sound frame.
- Corrosion or loosening of anchors and fasteners at the perimeter. On stucco-clad Burbank homes, anchor heads and perimeter fasteners are exposed to moisture wicking through the stucco and to the expansion and contraction of the wall itself. Loose anchors open a path for water intrusion at the frame edge, which is where most secondary rot and interior damage starts.
- Misaligned panels after settling or a remodel. Older Burbank homes settle, and additions or interior remodels can shift a wall enough that a heavy impact door no longer sits square. The panel drags even though the hardware is fine – the fix is realigning the panel and re-shimming rather than replacing the unit.
PGT Parts & Our Repair-vs-Replace Approach

PGT impact glazing units cannot be safely substituted with ordinary residential glass – that’s a structural and code issue, not a preference. So we source OEM or exact-match replacement rollers, pile seals, weatherstripping and glazed units for each job as it’s scoped. We don’t claim to keep PGT parts sitting in a warehouse; we order to spec and match the part to the unit.
On non-structural wear items, like a roller or a door handle, quality aftermarket hardware is a reasonable option when the OEM is unavailable, and we’ll say so on the quote. On structural and glazing components, it’s OEM or exact-match only.
Repair is usually the honest call for worn rollers, failed seals and fogged single units. Replacement starts to make sense when a unit shows widespread seal failure across several panes, or when frame damage and anchor deterioration are beyond a clean re-seal. We’ll tell you which one you’re facing, in writing. Call (844) 797-7958 for a free PGT assessment in Burbank.
Our PGT Service Process – Step by Step
- 1
Diagnosis. We inspect the PGT unit in person – pane-by-pane for fogging, track and roller condition on sliders, perimeter caulk and anchor condition at the stucco line. No phone guesswork, no assumptions.
- 2
Written scope and price. You get a line-item written estimate identifying whether the fix is glazing, hardware, perimeter sealing or full replacement, and the exact components we’ll source. Upfront pricing, no surprises.
- 3
Repair or install. We match the component to the PGT series, pull any permit the job requires, and install to the manufacturer’s spec so the unit behaves the way it was engineered to.
- 4
Test. Slider operation through a full open-close cycle, latch engagement, a water-hose check on the perimeter where the job calls for it, and a check that the fogged unit reads clear.
- 5
Warranty. Every PGT project we complete is backed by the 730-Day Done Right Promise. If it’s not done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterPGT Products We Service & Install in Burbank
We work across the PGT lines Burbank owners actually have on their houses: WinGuard Aluminum impact windows, WinGuard Vinyl impact windows and sliding glass doors, PremierVue aluminum windows, the PGT 200 and 300 Series aluminum windows, and WinGuard impact entry and patio doors. That covers the full range from fixed and operable windows in a Magnolia Park bungalow to heavy sliding glass doors on a valley-floor remodel. We service the existing unit – replacing rollers, re-sealing glazing, re-caulking the perimeter – or install a replacement when the repair math no longer favors the unit. No claim that we stock parts; the parts get sourced to the job.
We Also Service These Brands
Our expertise isn’t limited to PGT. We work with KraftMaid cabinetry, Kohler bath and kitchen fixtures, GAF roofing systems and Master Halco fencing, along with a curated portfolio of other top-tier partners across every trade. That multi-brand grounding means we diagnose your PGT window or door against a real standard, not through a single-brand lens.
FAQs – PGT Construction Service in Burbank

No. We are an independent PGT service provider and are not affiliated with or authorized by the manufacturer. We work on PGT products based on hands-on familiarity with the lines, and we’ll always be honest about that distinction. Call (844) 797-7958 to schedule a free assessment.
Yes, for structural and glazing components we use OEM or exact-match PGT parts, and impact glazing units are never substituted with ordinary glass. For non-structural wear items like rollers and handles, we may offer quality aftermarket hardware when OEM is backordered, and we say so on the quote. Call (844) 797-7958 for a written line-item estimate.
Most PGT repair work – a fogged glazing unit, worn rollers, re-sealing a slider – is scoped to a single visit once the parts are in hand. Parts sourcing for an exact-match impact unit can add a few days to the schedule, and full replacement windows or doors run longer depending on unit count and permit needs. Call (844) 797-7958 and we’ll give you a realistic timeline for your specific PGT job.
We cover PGT WinGuard Aluminum and WinGuard Vinyl impact windows and sliding glass doors, PremierVue aluminum windows, PGT 200 and 300 Series aluminum windows, and WinGuard impact entry and patio doors. If your unit is a PGT product, we can inspect it and tell you exactly what it needs. Call (844) 797-7958 to schedule.
No, when we repair to manufacturer spec. We use the right components, install to the series spec, and don’t substitute non-impact glass into an impact frame, which is the kind of change that would put a PGT warranty at risk. We can walk you through what the work involves before we start. Call (844) 797-7958.
Most Burbank PGT repairs land in the ranges below, and every quote we give is line-item written. Here’s how the numbers break down for the work we handle on PGT units and the surrounding assembly:
| Service | Typical Burbank range |
|---|---|
| Roof Repair | $400 – $1,800 |
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Roof Replacement | $8,000 – $20,000 |
A single fogged glazing unit or a roller-and-seal repair sits well below the replacement numbers, which is why we diagnose first. Call (844) 797-7958 for an exact quote – the estimate is free, upfront pricing means the number you see is the number you pay, and 0% financing for 18 months plus $1,000 off projects over $10,000 is available.
Book Your PGT Service in Burbank, CA
If your PGT window is fogged, your WinGuard slider drags or won’t latch, or the perimeter caulk around a door has opened up, we’ll come out, diagnose it honestly, and put the fix in writing. Calls are answered by a live person 24/7. Call (844) 797-7958 for your free PGT service estimate in Burbank.
Written by the team at Groundwork Construction Co. of Burbank.












