







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Burbank Homeowners Choose Toto Construction
Groundwork Construction Co. of Burbank provides independent Toto construction service in Burbank, CA, setting, sealing and reinstalling Toto fixtures as part of full bathroom and kitchen remodels. What makes our Toto work different is that we treat the fixture as part of the room, not an appliance bolted in after the tile goes down: we reset the closet flange, check the supply stop, verify the electrical for a Washlet seat, and confirm the rough-in before anything gets grouted. We work on Drake, Ultramax and Washlet installs inside Burbank homes every week. We are an independent remodeling provider, not affiliated with or authorized by Toto. Call (844) 797-7958 for a free estimate.
Why Trust Groundwork Construction Co. of Burbank for Your Toto Construction?

Toto fixtures reward a technician who knows how they’re built. A Toto one-piece and a cheap two-piece look similar at the showroom, but the internals aren’t close. Our technicians have up to 12 years of experience, and the ones who handle Toto work know that a G-Max or Tornado flush depends on exact geometry inside the tower and the fill valve working in step with it. Match the wrong aftermarket valve and the toilet flushes like a different fixture.
We use OEM-spec Toto fill valves, flush towers, gaskets and wax-free seals wherever they’re available, because flush performance lives in those tolerances. Supply lines and stops are a different story – a good-quality aftermarket stop works fine and costs less. Warranty-safe practice matters here too. A Toto warranty can be affected by how a fixture was installed and what parts went into it, so we install to spec and keep the paperwork straight. Every Burbank job is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. Upfront pricing means the number you see is the number you pay. And a live person answers our phone 24/7, so a toilet backing up into a Burbank hallway at 11 p.m. gets a human, not a voicemail.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Toto Construction Problems We Fix in Burbank
These are the Toto issues that actually come up in Burbank homes, and why each one happens:
- Drake and Drake II losing flush power (G-Max / Tornado towers). Burbank’s water runs hard, and mineral scale builds on the flush tower and the rim jets over a few years. A toilet that cleared the bowl in one flush starts needing two. It’s a water-chemistry problem, not a fixture defect, and it’s the single most common Toto complaint we see on the CST743 and CST454 series. Flush tower cleaning, sometimes a new tower, plus a fresh fill valve restores it.
- Wax ring and closet-flange leaks after a remodel. When a bathroom is re-tiled and the existing Toto gets cut around instead of pulled and reset, the flange ends up below finished floor height. The seal fails, and the water shows up at the ceiling below months later. This is the number-one avoidable Toto leak in Burbank remodels, and it’s why we pull the fixture during tile work.
- Ultramax and Ultramax II weeping at the tank-to-bowl joint. On a one-piece, the tank-to-bowl gasket and bolts do the sealing. After years of service, plus the heat cycling in a Burbank bathroom, those gaskets harden and bolts corrode. A slow seep at the base of the tank is the tell, and on older installs the supply stop is usually seized too.
- Washlet seat and control failures (S-series and C-series). Three failures show up repeatedly: nozzles clogged by Burbank’s mineral content, dead control panels, and supply connections that were never brought to a GFCI-protected outlet at the toilet. That last one is a code and safety issue, not just a convenience issue, and we’re careful to keep any work around it to a qualified electrician.
- Commercial-style flush-valve toilets (EcoPower and standard) in older homes. When someone drops a flushometer-style toilet into a Burbank home plumbed for a residential tank toilet, the supply volume isn’t always there. Weak flush, long refill, repeat visits. The fix is usually right-sizing the fixture to the plumbing, not adding a booster.
Toto Parts & Our Repair-vs-Replace Approach

Parts choice is where Toto service goes right or wrong. We use genuine Toto fill and flush valves, gaskets and wax-free seals where they’re available, because the flush performance depends on the exact OEM geometry. Quality aftermarket parts are fine for supply lines and stops, where the standard is universal. On hardware like flange bolts we lean OEM when the original is still the right fit.
We don’t claim to stock Toto parts locally. Parts are sourced per job – ordered to the model and serial so the tower or gasket we bring is the one that belongs in your fixture.
Repair or replace? A Toto body is usually worth repairing. A failed flush tower or a leaking tank gasket doesn’t justify replacing a fixture that’s still structurally sound, and a $60-$200 part often buys another decade of service. We replace a fixture when the ceramic is cracked, the rough-in is wrong for the room, or the remodel scope calls for a new layout. We’ll tell you which one applies before you spend.
Call (844) 797-7958 for a free estimate, and we’ll walk you through what your specific Toto needs.
Our Toto Service Process – Step by Step
- 1
Diagnosis. We identify the Toto model and series, then diagnose the actual failure: scale on the flush tower, a worn fill valve, a failing tank-to-bowl gasket, or a flange issue. We check the supply stop and the electrical if a Washlet is involved, since a dead seat is often a power problem, not a seat problem.
- 2
Repair or installation. We pull the fixture, replace components with Toto-spec parts, and reset the toilet on a new seal at finished floor height. If we’re mid-remodel, we reset the flange properly before tile goes down, and we set the fixture so the finished floor and the flange line up.
- 3
Test. We run a full flush cycle and watch the refill, the tank-to-bowl joint, the base, and – on a Washlet – the nozzles and controls. We test twice: once cold, once after the tank has cycled a few times.
- 4
Warranty and cleanup. The work is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. We leave the bathroom clean and leave you the part numbers for your records.
See the difference
Before
After
Before
After
Before
AfterToto Products We Service & Install in Burbank

We handle the Toto lines Burbank homeowners actually have in their homes:
- Drake and Drake II two-piece toilets (CST743 and CST454 series), including flush tower, fill valve and seat replacement
- Ultramax and Ultramax II one-piece toilets, including tank-to-bowl gasket and bolt service
- Washlet and Washlet+ bidet seats (S-series and C-series), installed with a proper GFCI outlet at the toilet
- EcoPower and standard flush-valve commercial-style toilets in older Burbank homes
We set, seal and reset these fixtures during full bathroom remodels, walk-in shower installs and vanity upgrades, so the toilet and the room around it work together.
We Also Service These Brands
Toto is one brand in a wider toolbox. Alongside Toto, we service and install KraftMaid cabinetry, Kohler fixtures, GAF roofing, PGT windows and dozens more across the trades. That matters on a Burbank remodel where the bathroom, the kitchen and the roof all come up in one conversation. You deal with one contractor, from foundation to finish line, built to last and backed in writing.
FAQs – Toto Construction Service in Burbank
No. Groundwork Construction Co. of Burbank is an independent remodeling provider and is not affiliated with or authorized by Toto. We work on Toto fixtures inside bathroom and kitchen remodels, using Toto-spec parts where they’re available, and we don’t represent ourselves as a Toto dealer or service center. For warranty claims that require Toto directly, we’ll point you to the manufacturer’s process.
Yes, wherever they’re available. We use genuine Toto fill valves, flush towers, gaskets and wax-free seals because the flush performance depends on the exact OEM geometry. Supply lines and stops are the exception – a quality aftermarket stop works fine. We order parts per job to your model and serial, so the fitting is correct the first time. Call (844) 797-7958 to talk through your fixture.
Most Toto toilet repairs – a fill valve, flush tower, or tank gasket – are done in a single visit, often in 1-2 hours. A reset during a bathroom remodel is part of the remodel timeline, not a separate call. Washlet installs and electrical work depend on whether the outlet is already in place. A free estimate gets you a real timeline, not a guess.
We cover the Drake and Drake II two-piece series (CST743 and CST454), the Ultramax and Ultramax II one-piece series, Washlet and Washlet+ bidet seats (S-series and C-series), and EcoPower and standard flush-valve toilets in older homes. If your model isn’t on that list, call with the model number and we’ll tell you straight.
Only if a fixture is installed off-spec or with the wrong parts. Installing to Toto’s spec and using OEM-spec components is the practice that protects your warranty, which is why we’re careful about parts choice and about resetting the fixture correctly at finished floor height. We’re independent of Toto, so warranty claims themselves go through the manufacturer.
A standalone Toto toilet repair is usually a few hundred dollars, while a full bathroom remodel that includes the fixture runs the ranges below. Here’s what Burbank homeowners actually pay:
| Service | Typical Burbank Range |
|---|---|
| Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
Burbank’s older housing stock matters here: a Magnolia Park bungalow with original lath-and-plaster and an unpermitted converted garage can add demo and replumbing scope that a newer home won’t. Call (844) 797-7958 for an exact quote – estimates are free, and the number you see is the number you pay.
Yes, almost always. The catch is that the flange has to be reset at finished floor height when the new tile goes down, and the fixture pulled and reinstalled on a new seal rather than cut around. That’s the failure point on most Toto leaks after a remodel. Keep the fixture, reset the flange, and you save the cost of a new toilet without inheriting a leak.
The tank-to-bowl gasket or bolts have failed. On a one-piece Ultramax, that joint does the sealing, and after years of service the gasket hardens and the bolts corrode. A slow seep at the base of the tank is the tell. It’s a parts-and-labor repair, not a reason to replace the fixture. Call (844) 797-7958 to get it looked at before it reaches the ceiling below.
Yes – a GFCI-protected outlet at the toilet. Washlet seats need power for the seat, controls and dryer, and a standard bathroom outlet on the far wall doesn’t cut it. If there’s no outlet near the toilet, adding one is electrical work that belongs to a qualified electrician, and we coordinate that as part of the remodel so the seat isn’t running on an extension cord.
Usually a repair. Weak flush on a Toto is typically mineral and scale buildup on the G-Max or Tornado flush tower, sometimes paired with a worn fill valve or a failing supply stop. Cleaning or replacing the tower and the fill valve restores the flush. Burbank’s harder water makes this a recurring maintenance reality. Replacement only makes sense if the ceramic is cracked. Call for a free estimate and we’ll diagnose it.
A shower remodel can shift the toilet and vanity if the footprint changes – especially a tub-to-shower conversion that frees up floor space. That means checking the rough-in, the flange height and the vanity footprint before walls close up. Here’s how this kind of job usually goes: a homeowner notices the Drake no longer clears the bowl on one flush and the tank refills with a hiss. The cause is scale on the flush tower plus a worn fill valve. A qualified pro pulls the tank, replaces the fill and flush components with the right Toto-spec parts, checks the supply stop, and reseats the toilet on a new seal at finished floor height. When the same bathroom is re-tiled, resetting the flange during the remodel is what prevents the leak that otherwise shows up at the ceiling below.
Book Your Toto Service in Burbank, CA
Whether it’s a Drake that won’t clear the bowl, an Ultramax weeping at the tank, or a full bathroom remodel where the Toto gets pulled and reset, Groundwork Construction Co. of Burbank handles it. Call (844) 797-7958 for a free project estimate and design consult. Upfront pricing, background-checked uniformed technicians, and the 730-Day Done Right Promise behind the work. Live person, 24/7.
Written by the team at Groundwork Construction Co.












