







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Driveway & Pavers in Burbank: What to Know First
We install, repair, and replace Belgard driveways and paver systems in Burbank in one to four days for most residential driveways, patios, and walkways, depending on square footage and base conditions. Typical Belgard driveway installation in Burbank runs $7,000 – $18,000, and you get the number in writing before we break ground. We’re an independent Belgard service provider: not affiliated with or authorized by Belgard, but deeply familiar with their catalog and how those products behave on Burbank soil.
This page is for Burbank homeowners who already have Belgard pavers underfoot or are considering a Belgard system. Call Groundwork Construction Co. of Burbank at (844) 797-7958 to schedule your free estimate.
Key Takeaways
- Belgard paver driveways in Burbank typically run $7,000 – $18,000; repairs and sealing cost far less.
- Burbank’s clay soils and summer heat cycling are the two main causes of paver settling and joint failure.
- Most Belgard repair work is completed in a single visit; full driveway installs take one to four days.
- Every job is covered by our 730-Day Done Right Promise, with upfront pricing and no change-order games.
How Belgard Products Fail – and How We Fix Them
Belgard makes a strong paver, and we install it because we believe in it. But every system fails in specific ways, and knowing those ways before they become a $12,000 problem is what separates a repair from a replacement. Here are the failure modes we see most in Burbank.
- Belgard Mega-Arbel settling along the driveway edge. Mega-Arbel’s large-format profile carries a lot of load, so when the edge restraint underneath is undersized or the base was never compacted in lifts, individual pieces drop and joints open by the second or third summer. We reset the affected field, rebuild the base in proper compacted lifts, and re-seat the edge restraint so the failure doesn’t repeat. In Burbank’s clay-heavy lots, undersized base is the most common root cause we find.
- Belgard Catalina joint migration after winter rain. Catalina’s interlocking shape fits tight, but when polymeric sand is applied too thin or over a wet joint, the first real rain season flushes sand out from the center of the driveway. We remove the dead sand, blow the joints dry, and re-sand with a proper polymeric product so the joint holds through rain and heat cycling.
- Belgard Weston Stone hairline cracks at the corner cuts. Weston Stone is often field-cut around curves and apron transitions. Diamond-blade cuts on a wobbly saw leave micro-fractures that split within one heating season. We reset those pieces with clean wet-saw cuts and fresh edge pieces so the corners have proper bearing.
- Belgard Bergerac lapping and gapping at patio transitions. Bergerac’s irregular profile is beautiful on a patio but requires a tighter restraint at the driveway-to-walkway transition or the pieces work themselves loose. We rebuild that transition with a soldier-course border and pinned restraint so the two surfaces stay married.
- Efflorescence on Belgard Urbana pavers. White bloom is salt migrating to the surface, and it’s less about the pavers than about moisture trapped under them. On Burbank homes we see it most where irrigation run-off has been pooling at the driveway edge. We correct the drainage grade, then treat the pavers with the proper cleaner, not a pressure wash that eats the surface.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Belgard Driveway & Pavers Process
- 1
Free on-site estimate and drainage walk. We measure the driveway, check base depth with test pits, and trace where water goes during a rain. That report is what the quote is built on, so the number on the paper is the number you pay.
- 2
Written line-item pricing. You get Belgard series, color, square footage, base prep, edge restraint, sand, and haul-off priced separately. No lump-sum bid, no mystery.
- 3
Material and base confirmation. We verify the specific Belgard series against your lot’s grade and use, and call out any thin spots in the existing base that need excavation before pavers go down.
- 4
Install or repair. Full replacement jobs are typically one to four days. Repairs of settled or migrating sections are usually completed in a single visit.
- 5
Walk-through and joint test. We walk the finished surface with you, pour a test bucket of water to confirm drainage, and demo the joint sand depth so you know what healthy looks like.
- 6
730-Day Done Right Promise. Every Belgard job we do is backed in writing. If a joint fails or a field piece shifts within the warranty window, we come back and fix it.
See the difference
Before
After
Before
After
Before
AfterWhat Belgard Driveway & Pavers Costs in Burbank

Pricing depends on Belgard series, square footage, base conditions, and whether we’re installing new or repairing existing. These are the ranges we quote most often in Burbank:
| Scope | Typical Burbank Range |
|---|---|
| Paver driveway installation (Belgard) | $7,000 – $18,000 |
| Paver patio installation | $3,500 – $11,000 |
| Driveway replacement (full tear-out and reset) | $5,000 – $14,000 |
| Driveway sealing | $250 – $700 |
| Concrete driveway installation (if pavers aren’t the right fit) | $4,500 – $12,000 |
| Asphalt driveway paving | $3,500 – $9,000 |
What moves the price most: Belgard series (Mega-Arbel and Catalina cost more than Urbana), square footage, base excavation depth, edge restraint, and haul-off of old material. Burbank hillside lots with steeper grades need more base and drainage work, and that’s reflected in the quote.
Call (844) 797-7958 for your free estimate. Pricing is upfront, and 0% financing for 18 months plus $1,000 off projects over $10,000 is available.
Why Burbank Homeowners Call Groundwork Construction Co. of Burbank for Belgard Work
We’ve been doing this since 2014, and our technicians bring up to 12 years of hands-on Belgard and hardscape experience to every Burbank job. Calls are answered by a live person 24/7, so when a driveway drain backs up on a Sunday night after a storm, you get somebody on the phone, not voicemail. Our technicians are background-checked and arrive in uniform.
Every Belgard project is covered by the 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. If it isn’t done right, we make it right. And because we work across kitchens, baths, roofing, windows, fencing, and additions, we’re not a one-trade shop pretending to know pavers. We also work alongside Belgard’s peers at KraftMaid, Kohler, GAF, and PGT, which means we bring cross-trade judgment, not tunnel vision, to every project.
Pricing is upfront. $1,000 off projects over $10,000 and 0% financing for 18 months are both standing offers, and the free project estimate and design consult is real, not a sales call with a quote at the end.
FAQs

Belgard’s product warranty covers manufacturing defects in the pavers themselves; the installation and base work are covered by the installing contractor, which on our jobs means our 730-Day Done Right Promise. In practical terms, a cracked paver from a manufacturing flaw falls under Belgard’s warranty, and a settled field, migrating joint sand, or failed edge restraint falls under ours. Call (844) 797-7958 and we’ll walk through which applies to your specific situation, free of charge.
Most standard Belgard series (Urbana, Catalina, Weston Stone, Bergerac) are typically available through regional hardscape suppliers within days, not weeks. Special-order colors or non-standard profiles can take longer, and we tell you in the estimate before you sign so there’s no surprise at install time. Call (844) 797-7958 to confirm current lead times for the specific Belgard series you want.
If the base is intact and only a few pavers have settled or the joint sand has flushed out, a targeted repair usually costs a fraction of a full replacement and lasts. If more than roughly a quarter of the field is shifting, or if test pits show base failure under the whole driveway, replacement is the cheaper long-term answer. We check the base on every estimate before recommending either one. Call (844) 797-7958 for a free assessment.
Most Belgard repair work is completed in a single visit, and full driveway installs typically take one to four days depending on square footage and base conditions. We don’t promise same-day service on installs; we schedule the work and hold the date. Call (844) 797-7958 to get on the schedule.
That’s efflorescence, salt surfacing from moisture trapped under the pavers, and it’s a drainage story more than a paver story. Burbank’s dry summers followed by winter rain push salts up through the surface. We correct the underlying grade and irrigation run-off, then treat the pavers with the proper cleaner, which solves it in most cases. Call (844) 797-7958 for an inspection.
If you own a Belgard driveway, patio, or walkway in Burbank and it’s shifting, cracking, or chalky, the smart move is a free estimate from Groundwork Construction Co. of Burbank. We walk the site, check the base, and give you a written number before anyone lifts a paver. Call (844) 797-7958 to schedule your free estimate. Every job is covered by our 730-Day Done Right Promise, and pricing is upfront: the number you see is the number you pay.
Written by the team at Groundwork Construction Co. of Burbank, serving Burbank and nearby areas.












