







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterAluminum Fence Cost in Burbank, CA: What $4,000 to $10,000 Actually Buys You
Aluminum fence looks like wrought iron, never rusts, and in Burbank it typically runs $45 to $85 per linear foot installed – which puts most residential jobs between $4,000 and $10,000. That’s the honest range. What it doesn’t tell you is that not all aluminum fence is built to the same gauge or powder-coat spec, and in Burbank’s 100°F+ summer heat a thin-wall panel with a cheap baked-on coat will chalk and fade in three years. Call (844) 797-7958 for an upfront, no-surprises quote that names every spec in writing.
Key Takeaways
- Installed aluminum fencing in Burbank runs $45-$85 per linear foot; typical residential projects land at $4,000-$10,000.
- Wall thickness (gauge) and powder-coat system decide whether your fence lasts 5 years or 20 – they are invisible on a bid.
- Grade B (.075″ wall) is the minimum spec for hillside and Rancho Equestrian applications where wind and lateral load matter.
- Open-panel aluminum satisfies defensible-space clearance in Burbank’s fire-risk hillside zones.
- Upfront pricing, a live person answering 24/7, and the 730-Day Done Right Promise back every job.

Burbank’s Heat and Hillsides Make Aluminum Spec a Different Conversation
Burbank sits in a hot, dry San Fernando Valley basin, and its building stock ranges from 1920s-40s Spanish Revival and Craftsman bungalows in Magnolia Park and the Rancho Equestrian district to 1950s-60s ranch homes on the hillsides and post-war flats downtown. That mix matters for a fence decision. The flatland lots near Magnolia Park are forgiving – modest wind loads, straightforward footings, plenty of shade. The Verdugo foothills and hillside streets above the valley floor are not. Santa Ana wind events push through that corridor, and the fire-clearance scrutiny up there is some of the tightest in the region.
That’s why we don’t treat aluminum fence as one product with one price. The same linear-foot count can cost meaningfully more or less depending on the wall thickness you spec and the coat system protecting it from UV. Burbank also runs on a soundstage economy, so a lot of the properties we quote belong to people in entertainment who are used to reading a spec sheet and expect their fence quote to read the same way. Groundwork Construction Co. of Burbank puts every one of those specs in writing before we lift a shovel.
What Are the Three Residential Grades of Aluminum Fence?
Aluminum fence is sold in three residential grades, and the difference is wall thickness – measured in thousandths of an inch. Most big-box fence installers spec Grade A as their standard, because it’s the cheapest material that will technically pass a glance. In Burbank’s hillside and equestrian applications, that’s the wrong call.
- Grade A – light residential (.050″ wall). Fine for a flat, sheltered Magnolia Park side yard with no wind exposure. It is not built for lateral load. Panels will flex and gates will sag if the footing depth isn’t right.
- Grade B – commercial/residential (.075″ wall). The minimum we’ll spec for Verdugo foothills properties, Rancho Equestrian lots, or anywhere with real wind exposure. It holds its line under Santa Ana gusts and keeps wide gates from racking.
- Grade C – industrial (.100″ wall). Overkill for a residential side yard, but the right answer where a property needs genuine lateral load resistance or vehicle impact tolerance.
Aluminum’s light weight relative to wrought iron is the practical win here. Because the panels and gate frames weigh a fraction of iron, gates can be built wider without requiring a cantilever gate system – which is exactly what the equestrian and hillside properties around Rancho Equestrian need for wide vehicle and trailer access.

Does Powder-Coat Quality Really Matter in Burbank’s UV?
Yes, and it’s the single most expensive thing to get wrong. A thermosetting polyester powder coat applied over a zinc-phosphate primer holds color in direct Southern California UV for 15 to 20 years. A thin single-stage coat with no primer will chalk and fade in 3 to 5 years on a south-facing Burbank exposure. Both look identical on a sample rack. Both get called “black aluminum.” The difference is invisible in a quote and decisive in year four.
Ask any fence quote three questions before you sign: what’s the aluminum wall thickness, what primer system sits under the powder coat, and how deep are the post footings. If the bid can’t answer all three in writing, it isn’t a real quote – it’s a guess with a number on it. That’s the standard Groundwork holds every job to.
Why Aluminum Satisfies Burbank’s Fire-Clearance Rules
Here’s a benefit solid-panel materials can’t offer. Burbank’s fire-risk hillside zones carry defensible-space requirements, and aluminum’s open-panel construction – like chain link – does not obstruct that clearance. You get the visual weight of wrought iron without a solid barrier that works against your fire compliance. For Verdugo foothills properties balancing curb appeal against code, that combination is hard to beat.
What Does Aluminum Fence Installation Cost in Burbank?
Installed aluminum fencing in Burbank typically runs $4,000 to $10,000 for a standard residential project, or roughly $45 to $85 per linear foot depending on grade, coat system, and site conditions. Here’s how the line items break out.
| Line Item | Typical Burbank Range |
|---|---|
| Aluminum fence installation (Grade A, .050″) | $45-$60 / linear ft |
| Aluminum fence installation (Grade B, .075″) | $60-$75 / linear ft |
| Aluminum fence installation (Grade C, .100″) | $75-$85 / linear ft |
| Full residential project (typical) | $4,000-$10,000 |
| Wide access gate (no cantilever required) | Quoted per opening |
| Post footing upgrades (hillside / wind exposure) | Quoted per site |
For comparison, a vinyl fence installation in Burbank typically runs $3,500 to $9,000 – close enough that the decision usually comes down to look and fire compliance rather than raw price. If you’re still weighing materials, our Fence Installation in Burbank page walks through the trade-offs side by side.
Every Groundwork quote is upfront pricing, no surprises – the number you see is the number you pay. Large projects over $10,000 qualify for $1,000 off, and 0% financing for 18 months makes the upgrade easier to absorb.
How Is Aluminum Fence Made? (What a Good Installation Looks Like)
Quality aluminum fence is extruded, not welded from tube stock – the pickets and rails are pushed through a die as one continuous profile, then the whole assembly is cleaned, zinc-phosphate primed, and powder-coated electrostatically before it ever leaves the factory. Rails slot into routed picket holes and lock with concealed fasteners, which is why a proper aluminum fence reads clean from the street side. Posts get set in concrete footings measured to the site’s wind and soil load, not a one-size depth. We install Boral and CGI aluminum systems among others, matched to the exposure the property actually sees. Our technicians have up to 12 years of experience, and every crew is background-checked and uniformed.
Aluminum fence is one line of the broader exterior work we handle from foundation to finish line – from matching a home’s existing ironwork to tying new fencing into a driveway or hardscape upgrade.
FAQs About Aluminum Fence Cost in Burbank
Aluminum fence in Burbank costs $4,000 to $10,000 for a typical residential project, or $45 to $85 per linear foot installed. The range swings on wall thickness and powder-coat system – a Grade B panel for hillside wind exposure costs more than a Grade A panel for a sheltered flatland yard. Call (844) 797-7958 for an exact quote – estimates are free.
Yes, if the coat system is thin. A single-stage baked-on coat with no zinc-phosphate primer will chalk and fade within 3 to 5 years on a south-facing Burbank exposure, while a proper thermosetting polyester powder coat over primer holds color for 15 to 20 years. The material cost difference is modest; the replacement cost isn’t. Call (844) 797-7958 and we’ll spec the coat system in writing.
Yes. Aluminum’s open-panel construction is treated like chain link for defensible-space purposes – it doesn’t obstruct clearance the way a solid-panel fence would. For Verdugo foothills properties balancing fire code against curb appeal, that makes aluminum the premium visual option that still complies. Call (844) 797-7958 to talk through your specific zone.
Most residential aluminum fence installations are completed in a single visit once material is on site. Wide access gates, hillside footing work, and properties with grading complications can extend that – your quote will state the schedule before work starts. Call (844) 797-7958 – a live person answers 24/7, no voicemail.
Get an Upfront Aluminum Fence Quote in Burbank
If you want the look of wrought iron without the rust maintenance cycle, aluminum is the answer – but only if the gauge and coat system are right for your property. Groundwork Construction Co. of Burbank puts every spec in writing, backs the work with our 730-Day Done Right Promise, and answers the phone with a real person around the clock. Call (844) 797-7958 for a free estimate and design consult.
Written by the team at Groundwork Construction Co. of Burbank, serving Burbank, CA.
What Our Customers Say
"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."
- Angela Wong"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."
- Laura Bennett"Quality work and honest pricing. He is stretched across a few jobs at once so he is not always on site, though the carpenter who was there knew everything."
- Whitney Norris












