







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Master Halco Fence Installation in Burbank: What to Know First
We install Master Halco fencing for Burbank homeowners as an independent Master Halco service provider, and most residential jobs run one to three days from site prep to cleanup. Honest pricing means the number you see is the number you pay: our Burbank fence installation projects usually land between $3,500 and $9,000, and your free estimate gives you a written, line-item quote before any digging starts.
This page is for the homeowner who already knows they want Master Halco material (or has it half-installed, or inherited a failing run) and needs a crew that handles it correctly. That means knowing which Master Halco line fits your property line, which parts are warranty-safe, and how Burbank’s sun, soil and hillside grades punish the wrong installation.
Call (844) 797-7958 and a live person answers, day or night. Every job is covered by our 730-Day Done Right Promise.
How Master Halco Products Fail – and How We Fix Them
Master Halco makes quality fencing, so when a run fails early, the material usually isn’t the culprit. The install or the environment is. Here are the patterns we actually see on Burbank properties and what we do differently.
- Powder-coated aluminum rails oxidizing at cut ends. On Master Halco aluminum runs, the factory finish holds up well, but any rail cut on-site exposes bare metal. In Burbank’s inland heat and dry summer air, those exposed edges start chalking and flaking within a couple of seasons. We touch up every field cut with the correct matching coating instead of leaving them raw, which is the single biggest difference between a run that lasts and one that doesn’t.
- Chain link stretching and sagging on slope transitions. Master Halco chain link is common on Burbank hillside lots where a fence has to step down a grade. When the tension wire isn’t set correctly across those steps, the fabric sags and the gate frame racks out of square. We tension and brace at each grade break rather than running one continuous pull and hoping it holds.
- Post lean from expansive clay and shallow footings. A lot of Burbank soil is expansive clay that swells in the wet months and shrinks hard in the dry ones. A post set in a footing that’s too shallow will tip and rotate a season or two later. We set footings to depth for the soil we find on your lot, not a one-size number, and we check grade and drainage before we dig.
- Vinyl panels bowing in direct sun exposure. Master Halco vinyl performs well, but panels installed too tight with no room for expansion can bow and pop their rails during Burbank’s hot spells. We leave the expansion gaps the manufacturer specifies and pick post spacing that respects the panel’s thermal movement.
- Wrought iron and ornamental gates binding after a season. Heavy ornamental gates, especially on uneven ground, want to sag on their hinges. The fix isn’t a bigger hinge; it’s a properly set gate post and correct hinge alignment from the start. We check gate swing and clearance under load before we call the job done.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Master Halco Fence Installation Process
From the first call to the final walkthrough, here’s how a Master Halco job runs with our crew.
- 1
On-site diagnostics. We walk the property line, check grade and drainage, look at soil conditions, and confirm which Master Halco product and series fit your goals. You get a written, line-item estimate.
- 2
The parts decision. We’re upfront about OEM versus quality aftermarket parts. For warranty-sensitive components we stay with Master Halco OEM parts; where an aftermarket part is genuinely equal or better and doesn’t touch your warranty, we tell you and let you choose. No surprises.
- 3
Site prep and layout. We set the line, mark post locations, and confirm property boundaries before we cut or dig. Good layout prevents the crooked-run problems that show up years later.
- 4
Installation. Our background-checked technicians arrive in uniform and set posts, hang panels or fabric, and hang gates to the specific requirements of your Master Halco line.
- 5
The test. We check plumb, tension, gate swing and clearance, and we look at how water will drain along the run. Anything that isn’t right gets corrected before we hand it over.
- 6
Cleanup and walkthrough. We haul off debris, walk the finished fence with you, and leave you the 730-Day Done Right Promise in writing. If it’s not done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterWhat Master Halco Fence Installation Costs in Burbank

Fencing costs depend on material, linear footage, grade, and how much prep your lot needs. Here are the ranges we quote in Burbank, with a lead range for most residential jobs of $3,500 to $9,000.
| Master Halco Project | Typical Burbank Range |
|---|---|
| Wood fence installation | $3,500 – $9,000 |
| Vinyl fence installation | $3,500 – $9,000 |
| Chain link fence installation | $3,500 – $9,000 |
| Aluminum fence installation | $4,000 – $10,000 |
| Iron / ornamental fence installation | $4,000 – $10,000 |
| Fence repair (section or gate) | Priced per job at estimate |
What moves the price: linear footage, number of gates, hillside grading, concrete removal, and whether you choose a premium Master Halco series. Longer runs with multiple gates and steep slope work sit at the top of the range. We pull permits where your project requires them and pass the inspection.
Ask about 0% financing for 18 months and our $1,000 off projects over $10,000. Call (844) 797-7958 to schedule your free estimate; it’s the fastest way to get an exact number.
Why Burbank Homeowners Call Groundwork Construction Co. of Burbank for Master Halco Work
We’ve built our reputation on doing the work right and standing behind it in writing. Every Master Halco installation is covered by the 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. If something’s off, we come back and make it right.
Our technicians have up to 12 years of experience and know Master Halco’s aluminum, chain link, vinyl, wood and ornamental lines well enough to spot the installation choices that cause early failures. They’re background-checked and show up in uniform, not in an unmarked van.
We keep calls answered by a live person 24/7, and we bring the same brand-standard approach to every trade we handle, with trusted partners like KraftMaid, Kohler, GAF and PGT across other services. From foundation to finish line, you’re dealing with one accountable contractor.
FAQs

Does installing a Master Halco fence void the manufacturer warranty? No, a proper installation by a competent contractor supports your warranty rather than voiding it. The risk comes from cutting corners like skipping expansion gaps or under-setting footings, which is why we follow Master Halco’s installation requirements on every job. Call (844) 797-7958 to talk through your specific product.
Can you get Master Halco parts for my area? Yes, Master Halco products are readily available for Burbank installations, including OEM components for warranty-sensitive parts. We’ll tell you upfront when an aftermarket part is a safe, equal-or-better choice and when it isn’t. Call for a free estimate on parts and labor.
Should I repair or replace my existing Master Halco fence? It depends on how much of the run is failing and why. A gate that sags or a few damaged panels are usually repair jobs; widespread post lean or finish failure across the whole run points to replacement. We’ll give you a straight answer and a written quote for both where it makes sense.
How long does a Master Halco fence installation take in Burbank? Most residential runs take one to three days depending on footage, grade and gate count. Hillside lots with slope work can run longer. Call (844) 797-7958 to schedule your free estimate and get a realistic timeline.
Will the price change once work starts? No. We hand you a written, line-item estimate and the number you see is the number you pay. If we discover something during digging that changes the scope, we talk to you before any extra work happens, and no change order goes forward without your approval.
Ready to get a real number for your Burbank Master Halco fence? Call (844) 797-7958 for a free estimate. A live person answers around the clock, and we’ll walk your property, answer your questions, and put a fixed price in writing. Built to last, backed in writing.
Written by the team at Groundwork Construction Co. of Burbank, serving Burbank and nearby areas.












