A Groundwork company - serving Burbank, CA
A living room with a wall of new windows and a sliding glass door
PGT · Burbank

PGT Windows & Doors in Burbank, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Burbank
A new bay window with a cushioned seat
A new casement window over a kitchen sink
A new curved paver walkway to the front porch
A galley kitchen opened up to the dining room with a new peninsula
A walk-in shower with large-format tile and a built-in niche
A remodeled family room with new windows and a window seat
A standing-seam metal roof over a covered porch
A new wood side gate with black hardware
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

PGT Windows & Doors in Burbank: What to Know First

We’re an independent PGT service provider for Burbank homeowners, installing and replacing PGT windows and doors across the city’s hillside and valley neighborhoods. A typical window or door project runs one to three days of install time, and the work is quoted upfront so the number on the estimate is the number you pay. Impact-rated PGT window packages in Burbank usually land between $8,000 and $25,000, while standard window replacement runs $4,500 to $15,000 depending on count and framing.

Call (844) 797-7958

This page is for the homeowner who already has PGT aluminum or vinyl products on the house, or who wants them, and needs a contractor who understands the specific lines PGT builds for California’s wind and wildfire-exposure requirements. We’re not affiliated with or authorized by PGT, but our technicians have up to 12 years of experience working with the brand’s product families. Call (844) 797-7958 and a live person picks up, day or night.

How PGT Products Fail – and How We Fix Them

PGT builds solid products, but every series has its weak points, and Burbank’s climate stresses different things than a Florida or Texas installation would. Here’s what we actually see when we open a PGT unit on a Burbank job.

  • WinGuard impact glazing delamination at the edge seal. On WinGuard impact windows, the laminated glass interlayer can start to cloud or bubble along the perimeter after years of thermal cycling, especially on west and south-facing elevations in Burbank where afternoon sun bakes the glass. It’s not a break, it’s a seal failure, and it shows up as a milky haze you can’t clean off. We replace the affected unit rather than the whole frame when the sash is sound.
  • Sliding glass door roller wear on the PremierVue and similar lines. The bottom rollers in PGT sliders flat-spot and seize after heavy use, and the door starts dragging or jumping the track. Cheap aftermarket rollers fall apart in a season; we fit OEM-spec rollers or a quality stainless replacement rated for the sash weight so the door glides again without tearing up the track.
  • Weatherstripping and sweep degradation on vinyl units. Burbank’s dry summers and cool valley nights work the vinyl and the foam seals back and forth. The PGT sweep at the bottom of a slider or the bulb seal on a hung window hardens and cracks, and you get a draft and dust infiltration. We replace the seals with OEM-profile weatherstripping so the unit closes tight and stays warranty-safe.
  • Hardware failure on casement and awning operators. The crank operator or the hinge arm on a PGT casement can strip or snap when the window has been forced against a swollen seal or debris in the track. We diagnose whether it’s the operator, the hinge, or the sash itself, then replace only what failed. A stripped operator is a $60 part and a half-hour fix; a mis-diagnosed whole-window swap is thousands.
  • Condensation and frame seal failures on aluminum-clad units. When the thermal break or the perimeter seal fails, you get fogging between panes or water staining at the sill. On Burbank’s older PGT aluminum installs, we see this most on the north-facing windows where morning moisture sits. We verify whether it’s a failed sealed unit (replace the glass) or a frame leak (reseal and reflash the opening) before quoting.
Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Our PGT Windows & Doors Process

Every PGT job follows the same sequence, whether it’s a single failed sash or a full-house impact window package.

  1. 1
    Call and walkthrough. You call (844) 797-7958 and reach a live person. We schedule a free estimate and design consult, and a background-checked, uniformed technician walks every opening with you.
  2. 2
    Diagnose the actual failure. We identify the PGT series, check the glass, seals, hardware, and framing, and separate what failed from what’s just worn. No guessing at a whole-unit replacement when a component fix will do.
  3. 3
    Parts decision. We recommend OEM parts when the unit is still under PGT warranty so you don’t void coverage, and quality aftermarket equivalents when it isn’t and the OEM part is on backorder or overpriced. You see the trade-off in writing.
  4. 4
    The install or repair. We pull the permits the job requires, protect the interior, and set the new units or components plumb, level, and flashed to shed water away from the opening.
  5. 5
    Test and inspect. Every window and door gets operated, latched, and checked for seal and drainage before we call it done. We don’t leave a unit that doesn’t close clean.
  6. 6
    Cleanup and the 730-Day Done Right Promise. We haul the old glass and debris, and the work is backed in writing for 730 days. If it’s not done right, we make it right.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What PGT Windows & Doors Costs in Burbank

A new multi-panel patio door opening a kitchen to the patio

Pricing here is upfront and line-item, so you know what each opening costs before we start. These Burbank ranges reflect the local market and the material reality of PGT product families.

PGT Project Type Typical Burbank Range
Impact window installation (WinGuard-class) $8,000 – $25,000
Standard window replacement $4,500 – $15,000
Single failed sealed unit / glass swap Component-level, quoted per opening
Sliding / patio door replacement Quoted per door with hardware and track

What moves the price: the number of openings, whether the framing needs repair, impact-rated versus standard glazing, and OEM versus aftermarket parts. Hillside Burbank homes with non-standard rough openings and stucco re-flash take more labor than a tract home in the flats. The number you see is the number you pay, and there’s $1,000 off projects over $10,000 plus 0% financing for 18 months. Call (844) 797-7958 for an exact quote; estimates are free.

Why Burbank Homeowners Call Groundwork Construction Co. of Burbank for PGT Work

We’ve been in business since 2014, and we put PGT work behind the 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. Calls reach a live person 24/7, so you’re not leaving a voicemail and waiting until Monday when a slider stops closing. Our technicians are background-checked and arrive in uniform, and they know the difference between a failed operator and a failed sash on a PGT casement without selling you a window you don’t need.

PGT is one of a curated set of brands we work with. When a project calls for it, you’ll also find us installing KraftMaid cabinetry, Kohler fixtures, GAF roofing, and Master Halco fencing – one contractor from foundation to finish line. That matters in a Burbank home where the window replacement turns into a stucco repair or a roofline issue; we handle the whole scope instead of handing you off.

FAQs

Installers setting a new window and checking it for level

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A newly finished roof with a ridge vent and step flashingA new black aluminum pool fence with a gateNew painted shaker cabinets with an organized deep drawerA remodeled hall bathroom with patterned floor tile and painted wallsA remodeled kitchen with a waterfall island and wood cabinetsA wood double vanity with two mirrors after a bathroom remodel

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Groundwork in Burbank

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Burbank team

A local vetted partner works across Burbank and the towns around it, to the same written standard as every Groundwork job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-7958
Local Service Coverage

Request a Free Estimate in Burbank

Tell us what you need - Groundwork Construction Co. of Burbank responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch