A Groundwork company - serving Burbank, CA
A living room with a wall of new windows and a sliding glass door
PGT · Burbank

PGT Construction Service in Burbank, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Burbank
A new bay window with a cushioned seat
A new casement window over a kitchen sink
A single-story rear room addition with tall windows and a new patio
A new clay tile roof
A new front yard fence with a matching gate
A new paver pool deck
An open kitchen and dining area after a remodel
A freestanding soaking tub in a remodeled primary bathroom
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Why Burbank Homeowners Choose PGT Construction

We provide independent PGT construction service in Burbank – window and door repair, impact glazing replacement, re-sealing, roller and track work, and full replacement of PGT units that no longer serve the house. What makes our PGT work different is that our technicians actually understand the hardware: WinGuard sliders, PremierVue aluminum frames, pile seals, anchor corrosion at the stucco perimeter. We are an independent PGT service provider, not affiliated with or authorized by the manufacturer, and we say so plainly. Our technicians have up to 12 years of experience, and every PGT project we touch is covered by the 730-Day Done Right Promise. Call (844) 797-7958 for a free estimate on your PGT work in Burbank.

Call (844) 797-7958

Why Trust Groundwork Construction Co. of Burbank for Your PGT Construction?

A new multi-panel patio door opening a kitchen to the patio

PGT builds its windows and doors around Florida-grade impact codes, and that engineering changes how the product needs to be handled. Impact glazing units can’t be swapped for ordinary glass. Fasteners, anchors and perimeter seals carry more load than standard residential units because the assembly is designed to hold under wind-driven debris. Our technicians have worked on PGT WinGuard aluminum and vinyl lines long enough to read the symptoms correctly: a fogged pane is a glazing seal failure, a dragging slider is a roller or track problem, water at the frame is an anchor and caulk problem, and each has a different fix.

We source OEM or exact-match PGT components wherever they exist, and we never substitute a non-impact pane into an impact frame. On non-structural wear items – rollers, pile seals, weatherstripping, handles – we’ll use quality aftermarket hardware when the OEM part is backordered, and we tell you when we’re doing it. All work is warranty-safe: we repair the way the unit was built so an existing PGT warranty stays intact. We’re proud to serve the Burbank community, answer calls with a live person around the clock, and put a real number in writing before work begins.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common PGT Construction Problems We Fix in Burbank

Here’s what we actually see on Burbank PGT installations, and why each one happens:

  • Gapping weatherstripping and pile seals on WinGuard sliders. The pile seal along the sash wears flat within a few years of regular use, and once it compresses, wind-driven rain and fine dust push past the sash into the track. In Burbank’s dry, dusty summers followed by hard winter rain, that gap shows up fast as water staining inside the track and a draft you can feel by hand.
  • Roller and track wear on heavy impact sliding glass doors. Impact glass is significantly heavier than standard glazing, so the rollers on a WinGuard sliding door take more load per opening. When they wear flat or a track gets a nick, the panel binds, jumps the track, or refuses to latch cleanly. The frame is almost never the culprit.
  • Fogging between panes in insulated impact units. When the seal or spacer fails, moisture gets trapped between the panes, and you see a haze or a milkiness that won’t clean off. This is a glazing problem, not a frame problem – the glass unit is what fails, and replacing the whole assembly wastes a perfectly sound frame.
  • Corrosion or loosening of anchors and fasteners at the perimeter. On stucco-clad Burbank homes, anchor heads and perimeter fasteners are exposed to moisture wicking through the stucco and to the expansion and contraction of the wall itself. Loose anchors open a path for water intrusion at the frame edge, which is where most secondary rot and interior damage starts.
  • Misaligned panels after settling or a remodel. Older Burbank homes settle, and additions or interior remodels can shift a wall enough that a heavy impact door no longer sits square. The panel drags even though the hardware is fine – the fix is realigning the panel and re-shimming rather than replacing the unit.

PGT Parts & Our Repair-vs-Replace Approach

Installers setting a new window and checking it for level

PGT impact glazing units cannot be safely substituted with ordinary residential glass – that’s a structural and code issue, not a preference. So we source OEM or exact-match replacement rollers, pile seals, weatherstripping and glazed units for each job as it’s scoped. We don’t claim to keep PGT parts sitting in a warehouse; we order to spec and match the part to the unit.

On non-structural wear items, like a roller or a door handle, quality aftermarket hardware is a reasonable option when the OEM is unavailable, and we’ll say so on the quote. On structural and glazing components, it’s OEM or exact-match only.

Repair is usually the honest call for worn rollers, failed seals and fogged single units. Replacement starts to make sense when a unit shows widespread seal failure across several panes, or when frame damage and anchor deterioration are beyond a clean re-seal. We’ll tell you which one you’re facing, in writing. Call (844) 797-7958 for a free PGT assessment in Burbank.

Our PGT Service Process – Step by Step

  1. 1
    Diagnosis. We inspect the PGT unit in person – pane-by-pane for fogging, track and roller condition on sliders, perimeter caulk and anchor condition at the stucco line. No phone guesswork, no assumptions.
  2. 2
    Written scope and price. You get a line-item written estimate identifying whether the fix is glazing, hardware, perimeter sealing or full replacement, and the exact components we’ll source. Upfront pricing, no surprises.
  3. 3
    Repair or install. We match the component to the PGT series, pull any permit the job requires, and install to the manufacturer’s spec so the unit behaves the way it was engineered to.
  4. 4
    Test. Slider operation through a full open-close cycle, latch engagement, a water-hose check on the perimeter where the job calls for it, and a check that the fogged unit reads clear.
  5. 5
    Warranty. Every PGT project we complete is backed by the 730-Day Done Right Promise. If it’s not done right, we make it right.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

PGT Products We Service & Install in Burbank

We work across the PGT lines Burbank owners actually have on their houses: WinGuard Aluminum impact windows, WinGuard Vinyl impact windows and sliding glass doors, PremierVue aluminum windows, the PGT 200 and 300 Series aluminum windows, and WinGuard impact entry and patio doors. That covers the full range from fixed and operable windows in a Magnolia Park bungalow to heavy sliding glass doors on a valley-floor remodel. We service the existing unit – replacing rollers, re-sealing glazing, re-caulking the perimeter – or install a replacement when the repair math no longer favors the unit. No claim that we stock parts; the parts get sourced to the job.

We Also Service These Brands

Our expertise isn’t limited to PGT. We work with KraftMaid cabinetry, Kohler bath and kitchen fixtures, GAF roofing systems and Master Halco fencing, along with a curated portfolio of other top-tier partners across every trade. That multi-brand grounding means we diagnose your PGT window or door against a real standard, not through a single-brand lens.

FAQs – PGT Construction Service in Burbank

A galley kitchen opened up to the dining room with a new peninsula

Service Typical Burbank range
Roof Repair $400 – $1,800
Window Replacement $4,500 – $15,000
Impact Window Installation $8,000 – $25,000
Roof Replacement $8,000 – $20,000

A single fogged glazing unit or a roller-and-seal repair sits well below the replacement numbers, which is why we diagnose first. Call (844) 797-7958 for an exact quote – the estimate is free, upfront pricing means the number you see is the number you pay, and 0% financing for 18 months plus $1,000 off projects over $10,000 is available.

Book Your PGT Service in Burbank, CA

If your PGT window is fogged, your WinGuard slider drags or won’t latch, or the perimeter caulk around a door has opened up, we’ll come out, diagnose it honestly, and put the fix in writing. Calls are answered by a live person 24/7. Call (844) 797-7958 for your free PGT service estimate in Burbank.

Written by the team at Groundwork Construction Co. of Burbank.

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A remodeled primary bathroom with a soaking tub and walk-in showerA second-story addition that matches the existing rooflineA newly finished roof with a ridge vent and step flashingA new black aluminum pool fence with a gateA new curved paver walkway to the front porchA walk-in shower with large-format tile and a built-in niche

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Groundwork in Burbank

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Burbank team

A local vetted partner works across Burbank and the towns around it, to the same written standard as every Groundwork job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-7958
Local Service Coverage

Request a Free Estimate in Burbank

Tell us what you need - Groundwork Construction Co. of Burbank responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch