







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in San Marino: Cost, Process, and What Your Lot Actually Needs
A chain link fence in San Marino, CA typically runs $3,500 to $9,000 installed, depending on linear footage, height, gauge, and how much grading or demolition your property line requires. Most residential jobs are finished in two to four working days once the survey and any needed approval are squared away. The number you see on the written estimate is the number you pay. Call (844) 797-7958 for a free on-site measurement and a fixed written quote.
How We Build a Chain Link Fence, Stage by Stage

Every chain link job follows the same five-stage sequence. We keep the schedule tight, but we don’t skip steps to save a day. Here’s exactly what happens, and what you’ll need to decide at each point.
Stage 1: Site walk and layout (day 1, roughly 1.5 to 2 hours)
We walk the property line with you, confirm the footage, and flag utility lines before anything breaks ground. San Marino has plenty of older estates with buried irrigation, gas lines, and landscape lighting running to the back lot; marking those first saves a costly dig later. You’ll decide the fence height and where the gate or gates go at this point. If the line runs through mature hedges or an existing fence, we note what has to come out.
Stage 2: Demo and prep (day 1 into day 2)
Old fencing comes down and the debris gets hauled. Posts get set in concrete at the correct spacing, typically 8 to 10 feet apart, and left to cure overnight before any tension gets applied. On sloped lots, which are common on the streets running up toward the Huntington, we step the fence in sections rather than letting it float, and we grade the base so the mesh doesn’t gap at the ground line. That step-setting adds a little time, but it’s what keeps the bottom rail level against a slope.
Stage 3: Frame, mesh, and gates (day 2 to day 3)
Top rail, tension bands, and terminal posts go up, then the chain link mesh is stretched and secured. Gates get hung and adjusted so they swing without dragging. Set aside roughly an hour to walk the finished panels with us; anything that needs tightening, retensioning, or a hinge adjustment gets handled on the spot before we consider the job closed.
Stage 4: Final touch-up and cleanup (day 3)
We check post caps, patch any dig spots, and clear the site. If your job needs a city inspection, we schedule it around the final walkthrough, not after you’ve already moved on with your week.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Chain Link Options You’ll Choose Between
Chain link is not one product. These are the decisions that separate a $3,500 job from a $9,000 job on a San Marino lot.
- Gauge and wire thickness: The most important choice you’ll make. A 11.5-gauge residential mesh (the lighter, thinner option) runs less but dents and sags faster; 9-gauge commercial weight costs more and holds its shape for years of kids, dogs, and wind. On a lot that’s going to see real use, the heavier gauge pays for itself.
- Height: Standard 4-foot and 5-foot fences are the everyday residential cutoff. A 6-foot fence gives real privacy and keeps a large dog contained; the jump in material and labor is modest.
- Coating and finish: Galvanized steel is the honest baseline and holds up in dry, sunny weather. Vinyl-coated mesh comes in black, green, and brown and reads much less like a bare industrial fence against a period-revival estate. The coating adds to the cost but hides better behind landscaping.
- Gates and hardware: A simple walk gate is one line item. A double drive gate or a self-closing and latching gate for pool or livestock code compliance is a different piece of hardware. We size the gate frame and posts to the load, not to a stock kit.
- Concrete footings: We set posts in concrete, not just tamped gravel, because a chain link line under tension will lean without a real footing. On San Marino’s firm ground that’s straightforward, but it’s a line item some low bids leave out.
What a Chain Link Fence Costs in San Marino, CA

Expect $3,500 to $9,000 for a chain link fence in San Marino, CA. The low end fits a short run of standard residential height in a straightforward location. The high end covers a long perimeter, heavier commercial gauge, a drive gate, sloping terrain, and removal of an old fence first.
Four factors push the number:
- Linear footage: Every extra 10 feet of fence is more posts, more mesh, more concrete. This is the biggest single driver.
- Existing conditions: Clearing old fencing, cutting through mature shrubs, or working around a shed or mature tree on the line adds labor and haul-away.
- Grade and terrain: A flat back line is fast. A slope that has to be step-set takes more time and more posts, and it’s where cheap bids quietly under-deliver.
- Material grade and gates: Commercial gauge over residential, vinyl coating over plain galvanized, and a drive gate over a walk gate all move the total up. A pool-safety or self-latching gate adds hardware cost.
The written estimate covers everything we just listed: removal, posts, concrete, mesh, tension hardware, gate(s), and cleanup. If your property line needs a survey because the corners aren’t clearly marked, that’s a separate line we’ll flag before work starts, not after.
See the difference
Before
After
Before
After
Before
AfterWhat San Marino Homes Specifically Do to This Job
San Marino is a city of large, architecturally significant historic estates, many designed by prominent early-20th-century architects, and construction here is governed by unusually strict design-review rules. That matters for a chain link fence more than you’d expect. Anything that changes the exterior look of the property, and sits in front of the house or along a street where historic designation is common (Lorain Road and Oxford Way are familiar cases), can require review by the city’s Cultural Heritage Commission before it goes up. The design guidelines exist to protect the character of these lots, and a bare galvanized chain link fence in a front yard will not always pass that review. We budget the extra time and paperwork up front and tell you what to expect so you’re not surprised by a stop-work letter.
The housing stock here is dominated by grand 1910s – 1930s Period Revival and Spanish Colonial Revival estates. Nearly every lot has an existing fence line that has lived through decades of hot, dry summers and Santa Ana winds, so the original fencing is often weathered, leaning, or thin where it should be stout. For many homeowners, a chain link fence is a practical working line for the back lot or a driveway enclosure rather than a front-yard statement, which is exactly the use this material suits best.
Serving San Marino, CA – Our Local Coverage Area
We serve San Marino and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Chain Link Fence in San Marino

Two to four working days for a typical residential job, with the exact timeline set by total footage and how much old fencing has to come down. Sloped lots and any needed approval add time. We give you a start date and finish date in writing before we break ground. Call (844) 797-7958 for a timeline against your actual lot.
Often yes, and on a city with design-review rules as thorough as San Marino’s, the answer depends on fence height, placement, and whether the lot carries historic designation. A fence behind the front setback is one thing; a fence that changes the street-facing look can trigger review. We handle permit paperwork and inspections and tell you what the city will require before we order material. Call for a free estimate and a straight answer on your lot.
Most jobs land between $3,500 and $9,000, with the exact figure set by footage, gauge, height, gates, and site conditions. A short standard-height residential run is at the low end; a long perimeter with commercial gauge and a drive gate is at the high end. Call (844) 797-7958 for an exact quote. Estimates are free.
Yes. We mark the line and existing utilities first, then work around mature trees, irrigation runs, and buried lines. Where footing needs to go in tight against a mature tree or a hardscape edge, we adjust the spacing rather than tear out what was there. Homeowners who want a clean line around a new shed often pair this with ADU Site Prep & Utilities in San Marino, and it works the same way.
The work and materials are covered by our 730-Day Done Right Promise. If something we installed fails to hold, we make it right. The local pro doing the work is licensed and insured as the state requires, and calls are answered by a live person 24 hours a day. Call (844) 797-7958 if you have a question about an existing or planned fence.
Get a Fixed Chain Link Fence Quote in San Marino
Call (844) 797-7958 and we’ll set up a free on-site estimate. We’ll measure your line, look at the existing fence, and hand you a written, line-item quote with the material grade, footage, gates, and total cost spelled out. No surprises, no scope creep. If the job ends up being part of a full Fence Installation in San Marino project, or you want to talk through our Fence Installation service more broadly, we’ll walk you through it. We cover San Marino and the surrounding area, often pairing work like this with Door Installation in San Marino when a project gets wider.
Written by the team at Groundwork Construction Co.












