







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterCommercial Fencing in Burbank, CA
If you own a business property in Burbank, commercial fencing is the perimeter that separates your operation from the street, keeps your equipment and inventory where it belongs, and tells customers exactly where your lot starts and ends. It’s heavier work than a backyard fence: taller runs, drive gates, security-rated posts, and the code and access rules that come with commercial frontage. Groundwork Construction Co. of Burbank installs commercial fencing built to hold up under daily traffic and Burbank’s dry, hot summers, and we back the work with our 730-Day Done Right Promise. Call (844) 797-7958 and a live person answers, any hour, any day.
We treat commercial work as the front door of the same craft we bring to residential jobs. If you’re still deciding what kind of perimeter your property needs, our Fence Installation in Burbank page covers the full range of materials, gates, and styles we work with. This page is about the commercial side: the load-bearing runs, the controlled access points, and the security layout that a working business actually depends on.
Key takeaways
- Commercial fencing in Burbank typically runs $38 to $95 per linear foot depending on material, height, and gate count.
- Taller runs, drive gates, and ADA-compliant pedestrian gates drive most of the cost.
- Most commercial installs are scheduled within 2 to 4 weeks of a signed estimate, weather and permit timing allowing.
- Every project carries our 730-Day Done Right Promise. The number you see on the estimate is the number you pay.

When You Need Commercial Fencing
A commercial fence is a piece of infrastructure, not a decoration. When it’s wrong or worn out, you feel it in your insurance questions, your employee safety, and the reviews customers leave about your parking lot. Here are the situations we see most often on Burbank commercial properties.
- Your lot sits on a busy corridor and vehicles keep cutting through. On stretches near Olive Avenue and along Empire Center, wide-open lots invite cut-through traffic and after-hours use. A properly set perimeter with controlled entry points ends that.
- You store materials, equipment, or fleet vehicles outside. Contractors, auto shops, and landscapers along the Burbank Boulevard corridor need a visible, secure barrier with a lockable drive gate. Copper theft and tool theft climb in summer, and a security-rated fence is the first line of defense.
- Your fence has rusted posts or leaning sections after a string of hot, dry seasons. Burbank’s summers bake wood and stress vinyl, and a run that leans after a wet winter is one that failed its footing. We see more footing failures on north-facing slopes near the Verdugo foothills than in the flat parts of town.
- You’re opening, expanding, or re-zoning a property. A new tenant improvement or a change of use often triggers a fence and landscaping plan, and the city wants a barrier that matches the approved plan. We build to the plan and handle the install to match.
- Your current perimeter doesn’t meet access or fire-lane requirements. Commercial properties need gates wide enough for fire apparatus and pedestrian access that meets ADA rules. If a gate or opening falls short, you’ll hear about it during inspection.
- Tenants or customers are cutting across neighboring property. A clear, continuous fence with defined entry points solves disputes and keeps foot traffic where you want it. We regularly help landlords around downtown Burbank resolve this without a confrontation.
If you’re weighing a perimeter against other exterior projects, it helps to know how the pieces fit together. Our home page walks through the full-scope approach we take, and this page covers the commercial fencing side in detail.
Our Commercial Fencing Process
Commercial jobs reward planning. We run every Burbank commercial fencing project on the same six-step path, so you know what happens and when.
- Site walk and layout. We walk the property, measure the run, mark gate locations, and note where utilities or existing hardscape will affect footings. Drive aisles and fire lanes get planned first, because they can’t move once the concrete sets.
- Material and height selection. We recommend the right fence for the job: heavy-gauge chain link with privacy slats for secured yards, ornamental steel for customer-facing frontage, or commercial-grade vinyl and composite where the look matters. We source from partners like James Hardie and Wellborn where the spec calls for their products, and we don’t choose a material just because it’s in stock.
- Permit and code check. Commercial fencing in Burbank often needs a permit, and the requirements change by zone and height. We confirm setback, height, and gate requirements before we order material so the install passes inspection the first time.
- Precise install. Footings set to frost and load requirements, posts plumbed, panels squared, and drive gates hung with hardware rated for daily commercial use. Our technicians bring up to 12 years of experience to the layout, and they’re background-checked and arrive in uniform.
- Gate and access hardware. Roller gates, swing gates, keypads, and crash-rated bollards where the lot needs them. We test every gate through a full open-and-close cycle before we call the job done.
- Walkthrough and hand-off. We walk the finished fence with you, confirm every gate and latch works, and hand off the paperwork. If anything isn’t right, our 730-Day Done Right Promise means we make it right.

Commercial Fencing Pricing in Burbank
Commercial fencing in Burbank typically costs $38 to $95 per linear foot, and a typical commercial run with a drive gate lands between $6,500 and $28,000. The range is wide because height, material, gate count, and the condition of the ground all move the number. We give you a no-hassle upfront price, and the number you see is the number you pay.
| Line item | Typical range in Burbank |
|---|---|
| Chain link, 6 ft, per linear foot | $28 – $48 |
| Chain link with privacy slats, 8 ft, per linear foot | $45 – $70 |
| Ornamental steel or aluminum, per linear foot | $65 – $110 |
| Commercial-grade vinyl, per linear foot | $48 – $82 |
| Drive gate (swing or slide), installed | $2,400 – $8,500 |
| Pedestrian gate, ADA-compliant | $850 – $2,200 |
| Permit and inspection fees | $350 – $1,400 |
| Removal and haul-away of old fence | $3 – $9 per linear foot |
What pushes a project toward the high end: heights over 8 feet, crash-rated hardware, gate automation, and sites where the old fence has to come out first. Flat, open lots run cheaper because footings and layout are simple. Sloped parcels near the Verdugo foothills or lots with buried utilities need more prep, and that shows up in the number.
We keep commercial projects within reach with our standing offers: a free project estimate and design consult, 0% financing for 18 months, and $1,000 off projects over $10,000. Ask about all three when you call (844) 797-7958. The estimate is free, and there’s no pressure on the call.
Why Burbank Properties Need the Right Perimeter
Burbank’s commercial mix is unusual: film and production lots, aerospace-adjacent businesses, retail along the Empire Center, and small owner-operated shops on streets like Magnolia Boulevard and San Fernando Road. That mix means fencing jobs here rarely look alike. A production lot needs a tall, secure perimeter with controlled access and a way for trucks to move in and out. A retail frontage needs a fence that looks professional from the sidewalk and still meets the city’s height and setback rules. We read the property first and build to what it actually does all day.
The climate matters too. Burbank summers push the high 90s and higher, and the dry, sunny stretch is hard on wood and cheap hardware. UV exposure fades vinyl if it’s not rated for it, and cheap gate hinges seize in the heat. We spec materials and hardware rated for the local climate, and we set footings to handle the ground movement that comes with it. Full-sun and slope conditions are the difference between a fence that holds its line and one that starts to sag by year three.
How Long Does a Commercial Fence Take to Install?
Most commercial fences in Burbank are installed in one to three days once permits clear and materials arrive. A simple chain link run on a flat lot can go up in a single day. A large ornate perimeter with multiple gates and automation usually takes two to three days of on-site work. Add one to three weeks for permit review if the job requires one, and a couple of extra days if the old fence has to come out first. We give you a firm schedule up front and stick to it. Call (844) 797-7958 for a timeline on your specific property.
FAQs – Commercial Fencing
How much does commercial fencing cost in Burbank?
Commercial fencing in Burbank typically runs $38 to $95 per linear foot, and most projects land between $6,500 and $28,000 once gates, permits, and removal are included. Chain link with privacy slats sits at the lower end, and ornamental or automated gates push toward the top. For an exact number on your property, call (844) 797-7958 and estimates are free.
Do I need a permit for a commercial fence in Burbank?
Often yes, depending on the zone, height, and whether the fence fronts a public right-of-way. Burbank requires permits for many commercial and frontage fences, and the height, setback, and gate requirements differ by district. We check the code for your property before we order material so the install clears inspection. Call us and we’ll walk you through what your specific lot needs.
Can you install a commercial fence on a property with an existing fence?
Yes. In most cases we remove the old fence and haul it away, then set new posts and footings for the new run. Removal typically adds $3 to $9 per linear foot depending on material and access. If part of the existing fence is still sound, we’ll tell you and price it honestly rather than replace work that doesn’t need it. Call (844) 797-7958 for a quote on removal plus install.
What’s the difference between commercial and residential fencing?
Commercial fencing is heavier: taller runs, larger posts, thicker gauges, and gates rated for daily traffic from people and vehicles. Commercial properties also carry access and fire-lane requirements that homes don’t. If you’re deciding between a lighter residential fence and a commercial build, our Fence Installation page explains the residential options so you can compare. When in doubt, we’ll tell you which one your property actually needs.
Get Your Commercial Fencing Estimate
If your Burbank business property needs a secure, well-built perimeter, call (844) 797-7958 for a free estimate and design consult. A live person answers 24/7, no voicemail pit and no waiting until Monday. We’ll walk your property, price the job up front with no surprises, and back the work with our 730-Day Done Right Promise and our background-checked, uniformed technicians. Whether you’re securing a production lot, a retail frontage, or a contractor yard, we build it once and build it right.
Written by the team at Groundwork Construction Co. of Burbank, serving Burbank.


