







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat It Really Costs Per Window to Install in Burbank, CA
For a straightforward opening swap, the honest answer is $450 to $1,250 per window installed in Burbank. Whole-house replacements bring that down to roughly $375 to $1,000 per unit because the fixed costs spread across more windows. That “$300-$700 per window” figure floating around online was written for a tract home in a younger suburb, not for a Spanish Revival bungalow in Magnolia Park where every opening has 80 years of paint, moisture, and amateur repair baked into it. Call (844) 797-7958 for an upfront number on your home before anything gets ordered.
Key Takeaways
- Per-window price depends heavily on your housing type: Craftsman and Spanish Revival run highest, 1950s ranches run mid-range, hillside homes vary with access and glazing requirements.
- Burbank’s permit fees create a flat cost that crushes the per-unit math on 1-2 window jobs. Whole-house replacement is dramatically better value.
- SCE and SoCalGas rebates can shave $50-$150 off the net cost per window on qualifying replacements.
- Brand tier matters: Andersen and Marvin cost more up front, but they hold up at resale and inspection in this market.

Why Burbank’s Housing Stock Changes the Per-Window Math
We’ve stood in enough Burbank window openings to know the online averages don’t survive contact with the actual house. The city’s stock runs from 1920s-40s Spanish Revival and Craftsman bungalows in Magnolia Park and the Rancho Equestrian district to 1950s-60s ranch flats near downtown. Each type prices differently.
| Housing Type in Burbank | Typical Cost Per Window | What Drives the Number |
|---|---|---|
| Craftsman / Spanish Revival (Magnolia Park, Rancho Equestrian) | $800-$1,250 | Out-of-square openings, stucco cutting and patching, possible lead paint, lath-and-plaster interior returns |
| 1950s-60s Ranch Tract (hills flats, post-war neighborhoods) | $550-$900 | Standard sizing, but aging frames and worn flashing often need rebuild |
| Hillside Homes (Verdugo foothills and above) | $700-$1,400 | Access difficulty, scaffolding, fire-rated glazing where code requires it |
On a Spanish Revival in Magnolia Park, the original opening is almost never square. Stucco surrounds need cutting back and re-patching to match, and if the home was built before 1978 there’s a lead-paint protocol that adds labor. On a 1950s ranch flat, sizing is usually standard, but the frame has 60-plus years of settling and the flashing behind the stucco is often gone. Hillside homes introduce a different variable entirely: getting a crew and materials up steep streets in the Verdugo foothills, plus fire-rated glazing requirements on the fire-exposure side. Burbank’s own building-safety and seismic retrofit enforcement is stricter than most neighboring cities, and window work on older homes trips more inspections here.
How Burbank Permit Fees Quietly Change Small-Job Pricing
Here’s the detail most cost-per-window articles skip. Pulling a window permit in Burbank costs nearly the same whether you’re replacing one window or twenty. The fee is structured around the permit itself, not a flat per-unit rate. That means the fixed permit cost is spread across one or two windows on a small job – which bumps the effective per-window cost dramatically – but nearly disappears on a whole-house replacement.
A 1-2 window job can carry $200-$400 in permit costs that land directly on top of the per-unit price. Replace 12 windows under one permit and that same flat fee drops to about $17-$35 per window. This is the single biggest reason a whole-house window job is better value per unit than piecemeal work, and it’s what we help homeowners see on paper before a single window is ordered.
It also matters because Magnolia Park bungalows routinely hide unpermitted additions and converted garages. The moment a remodel pulls a permit, that history surfaces, and window work needs to align with what’s actually on record with the city. Our team builds that into the estimate up front so the number you see is the number you pay.

The Rebate Offset Most Cost Articles Leave Out
SCE and SoCalGas both offer rebates for qualifying window replacements, and on a whole-house job those rebates reduce the net cost per window by roughly $50-$150. That’s a real offset that never shows up in the generic national averages. Older single-pane windows in Burbank’s 1950s ranch homes are the best candidates, since they fail the energy-performance thresholds the rebate programs target.
The climate here makes the case stronger. Burbank sits in a hot, dry San Fernando Valley basin, and the dry summers plus Santa Ana wind events drive extreme heat against unshaded stucco walls and single-pane glass. Upgrading to energy-rated windows pays back twice – once through the rebate, once through a cooler house in August. Our team walks the rebate math into the estimate rather than leaving homeowners to chase it after the fact.
Why Andersen and Marvin Cost More – And Why That Holds Up
The premium window lines cost more, and the reason is concrete: warranty coverage, lead-time reliability, and how brand names register at resale and inspection. In Burbank’s entertainment-industry resale market, homeowners respond to recognized names on a home’s feature list, and inspectors note the window brand when they walk a property. The premium tiers are what we recommend when longevity and resale are the goals. For a full look at how we source and install across the trade, see our Windows & Doors page, or explore our Burbank service area to see how our full-scope home construction work fits together.
Every window job we run is backed by the 730-Day Done Right Promise. If it’s not done right, we make it right, and that guarantee is one of the longest workmanship guarantees in the residential construction space. We use curated brand partners across the trade – Andersen and Pella among the window lines we trust – so homeowners choose quality, not just availability.
Financing Turns the Whole-House Decision Into a Monthly Number
Whole-house replacement is where the per-unit savings live, and 0% financing for 18 months makes it the practical choice. Replacing 12 windows becomes a specific monthly figure we can put on paper before the first site visit. Add $1,000 off projects over $10,000 and the whole-house route pulls further ahead of piecemeal swaps.
Our technicians have up to 12 years of experience, arrive in uniform, and are background-checked on every job. Calls are answered by a live person 24/7, so you’re never waiting until Monday for an answer. Review the full set of window replacement options in Burbank for a closer look at lines and lead times.
FAQs
Most Burbank window installations land between $450 and $1,250 per window, with whole-house jobs dropping the per-unit figure to roughly $375-$1,000. Craftsman and Spanish Revival homes in Magnolia Park sit at the top of that range because of irregular openings and stucco repair, while 1950s ranch tract homes land mid-range. Call (844) 797-7958 for an exact quote – estimates are free.
Whole-house replacement is cheaper per window because Burbank’s flat permit fee and setup costs spread across more units. A single-window job can carry $200-$400 in fixed permit costs that land on that one window, while the same fee divided across 12 windows is a fraction per unit. Call (844) 797-7958 and we’ll show you both numbers side by side.
Yes – qualifying window replacements can reduce your net cost per window by about $50-$150 through SCE and SoCalGas programs. Older single-pane windows in Burbank’s post-war flats are the strongest candidates. We build the rebate math into the estimate so you see the real net number. Call (844) 797-7958 for a free estimate.
Hillside homes in the Verdugo foothills can add $150-$400 per window over a flatland job due to access difficulty, scaffolding, and fire-rated glazing requirements on fire-exposure sides. Burbank’s fire-clearance and hillside scrutiny is among the tightest in the region. Call (844) 797-7958 and we’ll scope yours accurately.
Get a Real Number, Not an Online Average
Online averages were never written for your house. Get an upfront, per-window number built around Burbank’s actual housing stock, permit fees, and rebate math – backed by 0% financing for 18 months, $1,000 off projects over $10,000, and our 730-Day Done Right Promise. Call (844) 797-7958 today for a free project estimate and design consult with Groundwork Construction Co. of Burbank.
Written by the team at Groundwork Construction Co. of Burbank, serving Burbank, CA.
What Our Customers Say
"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."
- Angela Wong"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."
- Laura Bennett"Quality work and honest pricing. He is stretched across a few jobs at once so he is not always on site, though the carpenter who was there knew everything."
- Whitney Norris












