







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat It Really Costs to Reface Kitchen Cabinets in Burbank, CA
Refacing kitchen cabinets in Burbank typically runs $14,000-$45,000 for a full kitchen, with most Magnolia Park and Rancho Equestrian bungalows landing between $18,000 and $28,000 once hidden wall conditions are handled. That $4,000-$8,000 quote you got assumes your cabinet boxes are square, level, and deep enough for modern doors. In a 1930s Burbank bungalow, they often aren’t. Call (844) 797-7958 for a free estimate and a live person, 24/7.
Key Takeaways
- Refacing is cheaper than full replacement, but Burbank’s older housing stock can push the real number up.
- Vintage boxes that are out of square by more than 1/4 inch start closing the gap between refacing and replacement.
- Structural cabinet changes pull a Burbank permit; cosmetic veneer-only usually doesn’t.
- Groundwork backs every refacing job with the 730-Day Done Right Promise.

Why Burbank Refacing Quotes Blow Up Mid-Project
The Magnolia Park and Rancho Equestrian districts are full of 1920s-to-1940s Spanish Revival and Craftsman homes, and plenty still have original box cabinets set into lath-and-plaster walls. Those boxes weren’t built to modern depth. So when a crew pulls off the old doors, they find a shallow box, a wall that isn’t plumb, or a cabinet carcass that’s been quietly shimmed for decades. The veneer can’t just go on. Someone has to rebuild or shim the structure first.
That’s the real cost conversation. It isn’t door and veneer pricing. It’s what’s behind the doors. We’ve walked into Burbank kitchens where the original cabinets measured more than half an inch out of square, and the homeowner had already signed off on a “cosmetic” reface. That job needed structural work before a single panel went up.
This is also why Burbank permit enforcement matters more than in neighboring Glendale or Pasadena. The city runs a tighter review, and the flatland bungalows frequently hide unpermitted additions and converted garages that surface the moment a remodel pulls a permit. A refacing job that turns structural can trigger that review. Better to know going in than halfway through.
How to Read a Refacing Quote Line by Line
Here’s the itemization you should demand, and roughly what each piece runs in the Burbank market. This is where upfront pricing separates the real bids from the vague ones.
| Line Item | Typical Burbank Range |
|---|---|
| Veneer material (wood, laminate, or rigid thermofoil) | $3,000-$9,000 |
| Door and drawer fronts | $4,500-$14,000 |
| Hardware (hinges, pulls, soft-close) | $800-$3,000 |
| Labor (removal, prep, install) | $4,500-$14,000 |
| Burbank upcharge for out-of-square vintage boxes (shimming or rebuild) | $1,500-$6,000 |
Add it up and a straightforward Burbank reface sits in the $14,000-$45,000 band, with the vintage-box upcharge deciding where in that band you land. The number we quote is the number you pay. No surprises after demo starts.

The Brand Choice That Decides How Long It Lasts
Burbank sits in a hot, dry San Fernando Valley basin, and that heat is brutal on cheap finishes. Big-box thermofoil doors look fine for a while, then the dry air draws moisture out of the substrate and the foil starts to lift and delaminate. In our experience that shows up within three to five years on unshaded south- and west-facing cabinet runs.
KraftMaid door profiles cost more than thermofoil up front, and they’re worth it here. The finish holds through the valley heat, the profiles are built to modern depth, and the doors won’t warp the way a thin thermofoil skin does. This is the “built to last, backed in writing” part of the job. When you’re weighing a full Kitchen Remodeling against a reface, material quality on the front-facing pieces is what you’re really buying with the extra spend.
Refacing vs. Replacing: The 1/4-Inch Rule
Before you call anyone, measure. Open a cabinet door and check whether the box is square and level. If the boxes are out of square by more than 1/4 inch, refacing climbs toward replacement cost, and replacement is the smarter money. If they’re within that tolerance, refacing wins on both cost and time. Here’s how to check:
- Hold a level against the face frame across the top, then down the sides.
- Measure the diagonal from corner to corner of a box; if the two diagonals differ by more than 1/4 inch, it’s racked.
- Check interior depth. Modern doors and hinges need clearance the 1930s boxes don’t always have.
- Press a straightedge against the wall beside the cabinets to spot lath-and-plaster bowing.
If your boxes fail that test, a full Kitchen Remodeling in Burbank may actually cost you less over ten years than patching a racked box twice.
What Pulls a Permit in Burbank (and What Doesn’t)
Cosmetic refacing, meaning new veneer and door fronts on sound, unchanged boxes, usually doesn’t pull a Burbank permit. Structural cabinet modifications do. That covers rebuilding a carcass, moving a cabinet run, cutting into lath-and-plaster to change depth, or adding structure to correct a racked box. Because Burbank’s building-safety review runs stricter than Glendale or Pasadena, we plan for the permit question up front, not after the boxes are open. It’s a real line on the budget, and a contractor who doesn’t raise it early is the one to worry about.
The 730-Day Done Right Promise, Applied to Refacing
Most refacing specialists offer 90 days or nothing. Refacing has a lot of small moving parts, and the failures show up late: veneer lifts, hinges loosen, doors warp through a hot valley summer. Groundwork covers all of it for 730 days. If it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction, and it’s the reason we can stand behind a KraftMaid or Cambria finish years after the crew left.
Our technicians have up to 12 years of experience, they’re background-checked and arrive in uniform, and every call is answered by a live person 24/7. Groundwork Construction Co. of Burbank brings that same standard to every refacing job in the city.
FAQs
Refacing kitchen cabinets in Burbank costs $14,000-$45,000 for a full kitchen, with most older bungalows landing between $18,000 and $28,000 once hidden wall and box conditions are addressed. Call (844) 797-7958 for an exact quote; estimates are free.
Refacing is usually cheaper than replacement when your cabinet boxes are sound and within 1/4 inch of square. In a 1930s Burbank home with racked or shallow boxes, the structural upcharge can close that gap, and replacement becomes the better value. A free estimate settles which side you’re on.
Cosmetic refacing with unchanged boxes usually doesn’t pull a permit; structural cabinet modifications do. Burbank reviews permits more strictly than Glendale or Pasadena, so plan for it up front. Call (844) 797-7958 and we’ll sort out whether your job needs one.
Burbank’s dry valley heat draws moisture from the substrate behind cheap thermofoil, and the foil lifts and delaminates within three to five years on sunny cabinet runs. A KraftMaid door profile with a proper finish holds up far longer.
Ready for a Real Number?
Get the exact cost to reface your Burbank kitchen with upfront pricing and no surprises. Call (844) 797-7958 for a free project estimate and design consult. Live person, 24/7. Ask about the 730-Day Done Right Promise, 0% financing for 18 months, and $1,000 off projects over $10,000.
Written by the team at Groundwork Construction Co. of Burbank, serving Burbank, CA.
What Our Customers Say
"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."
- Angela Wong"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."
- Laura Bennett"Quality work and honest pricing. He is stretched across a few jobs at once so he is not always on site, though the carpenter who was there knew everything."
- Whitney Norris












