







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat Driveway Sealing Costs in Burbank, CA (And Why the Interval Matters Here)
Driveway sealing in Burbank runs $250 to $700 for a typical residential driveway, depending on square footage, crack repair, and whether your grade needs a traction-additive product. That’s the whole answer for most homeowners. But the number that actually matters in Burbank isn’t the one-time cost – it’s how often you’ll be paying it. Call (844) 797-7958 and we’ll give you an upfront number for your specific driveway before any work is scheduled.
Because here’s the thing nobody in a national maintenance guide tells you: the 3-to-5-year reseal interval those guides print was written for climates that get a real winter and a mild summer. Burbank is neither.

Why Your Burbank Driveway Ages Twice as Fast as the Guide Says
Burbank sits in a hot, dry San Fernando Valley basin, and an unshaded driveway here takes a UV and heat beating for 90-plus consecutive days through summer. Add Santa Ana wind events that push ambient temperatures higher and dry the surface out further, and the asphalt binder – the black glue holding the aggregate together – oxidizes at a rate that surprises people who moved here from milder parts of the country.
What that looks like in practice: a coal-tar emulsion sealer that holds up for four years in Minneapolis might show cracking and raveling in two on an unshaded Burbank driveway. We see it constantly on the ranch homes up in the hills and on the post-war flats near downtown, where the driveway faces full afternoon sun with zero tree cover.
The fix isn’t sealing more often with the same product. It’s specifying the right product. For Burbank’s climate we use a UV-resistant polymer-modified or acrylic sealer, not a basic coal-tar emulsion. The polymer chemistry resists oxidation and stays flexible through the heat cycle instead of going brittle. That’s what lets a properly applied seal actually last the 18-to-24-month interval this climate demands, instead of failing at 12.
The real cost-per-cycle math
If you reseal every 18-24 months at $250-$700 and use a sealer that holds, your annualized cost is modest. If you reseal every 4 years with a cheap product that fails in year two, you’re paying twice for the same square footage. And you’re accelerating the replacement clock on a driveway that costs $5,000-$14,000 to replace.
Prep Is Where Most Burbank Sealing Jobs Go Wrong
Sealer is a topcoat. It doesn’t fix what’s underneath, and in Burbank’s expansive clay subsoil areas, what’s underneath is always moving. Those clay soils swell when they take on water and shrink as they dry out. During the occasional winter rain event, water finds any unsealed hairline crack, gets into the sub-base, and the clay swells. That sub-surface movement will pop a fresh sealer coat within a single season.
This is why the correct prep step for Burbank is crack routing, not just crack filling. Routing means cutting the crack open to a clean, uniform channel before filling it, so the filler actually bonds to sound material instead of sitting on top of a jagged surface that keeps moving. Pouring sealer over hairline cracks without routing is the single most common shortcut we correct.
Freeze-thaw isn’t the villain here – we barely get any. The clay-swell cycle is. And the difference between a seal that lasts two seasons and one that lasts one is usually those 20 minutes of routing.

Hillside Driveways in the Verdugo Foothills Need a Different Product
Steep-grade driveways up in the Verdugo foothills and the hillside streets above the valley floor can’t take a standard gloss sealer. A glossy coat on a grade creates a genuine slip hazard the moment the brief wet-season rain arrives. The correct product for those driveways is a traction-additive sealer – aggregate blended into the mix so the surface stays walkable and drivable when wet. If a crew quotes you a standard gloss coat on a steep Burbank grade, ask what happens in the rain.
Hillside work here also carries fire-clearance scrutiny that flatland jobs don’t, so keeping the driveway edge trimmed and clear isn’t just cosmetic. It’s part of staying compliant.
What’s Actually in a Groundwork Sealing Scope
Our scope on a Burbank driveway isn’t a single spray pass and a wave goodbye. It includes:
- Crack routing before any filler goes down, so the repair bonds to sound asphalt
- Edge-trim cleaning so the sealer adheres at the perimeter where water enters
- A two-coat application of UV-resistant polymer sealer, not one thin pass
- The product brand and mil thickness documented in writing on the work order
- Photo documentation of surface condition at the time of sealing
That last point matters more than it sounds. Sealing often surfaces larger driveway problems the homeowner didn’t know about – alligator cracking, a failing base, drainage running the wrong way. When we document the surface with photos before we seal, you have a real baseline if replacement becomes necessary within the year. No contractor dispute, no “it was like that when we got here.” Just a record. Our technicians have up to 12 years of experience, and that habit comes from watching how those disputes play out.
Sealing is also the natural entry point into bigger work. If the surface tells us replacement is the smarter spend, we’ll say so, and you can compare against our Driveway & Pavers options before committing.
Driveway Sealing Cost in Burbank: The Line Items
| Service | Typical Burbank Range |
|---|---|
| Driveway sealing (standard two-coat, 2-car driveway) | $250 – $700 |
| Crack routing and filling (add-on) | Quoted within the seal range based on crack length |
| Asphalt driveway paving (if replacement is the better call) | $3,500 – $9,000 |
| Driveway replacement (full tear-out and repour) | $5,000 – $14,000 |
| Paver driveway installation (long-term alternative) | $7,000 – $18,000 |
Upfront pricing, no surprises – the number you see is the number you pay, and every sealing job is covered by our 730-Day Done Right Promise. If it’s not done right, we make it right.
Common Local Scenarios We Walk Up To
The Magnolia Park bungalow with the original 1940s drive
Plenty of these older homes in Magnolia Park and the Rancho Equestrian district have a driveway that’s never been properly sealed, or was sealed decades ago with a product long past its life. We walk the surface, document the condition, and tell you honestly whether a seal will buy you time or whether the base is too far gone. Sometimes the right answer is a two-stage plan: seal now, budget for replacement in three to five years.
The hillside driveway above the valley floor
Steep grade plus brief winter rain equals a slip hazard if anyone sprays a gloss coat on it. We specify a traction-additive sealer here as a rule, and we time the job so the surface is fully cured before the wet season.
The unshaded ranch drive taking full afternoon sun
No tree cover, west-facing, baking from noon on. This is the fastest-degrading driveway profile in Burbank, and it’s where the 18-month reseal interval is non-negotiable. We’ll set you up on a schedule rather than let it run to failure.
For any of these, our team at Groundwork Construction Co. of Burbank handles the walkthrough and gives you a fixed number before we start.
FAQs
Driveway sealing in Burbank typically costs $250-$700 for a standard two-car residential driveway, including crack routing, edge cleaning, and a two-coat UV-resistant polymer application. Hillside grades needing a traction-additive product can land at the higher end. Call (844) 797-7958 for an exact quote – estimates are free.
Every 18-24 months is the realistic interval in Burbank, not the 3-5 years national guides suggest. The valley’s UV intensity and 90-plus days of summer heat oxidize asphalt binder roughly twice as fast as milder climates, so waiting longer means the surface starts raveling before you reseal. Call (844) 797-7958 to schedule a condition check.
Sealing at $250-$700 is far cheaper than replacement at $5,000-$14,000, so it’s almost always worth sealing first if the base is sound. The exception is widespread alligator cracking or a failed sub-base – at that point sealing is money thrown at a surface that’s already gone. We’ll tell you which one you’re looking at before you spend. Call (844) 797-7958 for an honest assessment.
In most cases, yes – driveway sealing is a same-day job and we can often get out within the week depending on weather and cure windows. Calls are answered by a live person 24/7, so you’re never stuck in a voicemail black hole. Call (844) 797-7958 to lock in a slot.
Get a Fixed Sealing Price Before the Surface Gets Any Worse
Every extra summer on an unsealed Burbank driveway is money you’ll pay later. Get a free estimate and a documented condition report, with a clear number and a two-coat scope in writing. Call (844) 797-7958 today – your number is the number you pay, and it’s backed by the 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co. of Burbank, serving Burbank, CA.
What Our Customers Say
"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."
- Angela Wong"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."
- Laura Bennett"Quality work and honest pricing. He is stretched across a few jobs at once so he is not always on site, though the carpenter who was there knew everything."
- Whitney Norris












