







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHome Renovation Cost Per Square Foot in Burbank, CA: What Your House’s Age Does to the Number
Home renovation in Burbank runs $185 to $320 per square foot for a mid-grade whole-house remodel, about $95 to $170 for a cosmetic refresh, and $450 to $650 per square foot for a structural addition or ADU. Those ranges sit higher than most national benchmarks for one reason: the majority of Burbank’s housing stock predates 1960, so opening walls triggers code-required upgrades on wiring and framing that a generic $/sqft figure never accounts for. For an exact number on your address, call Groundwork Construction Co. of Burbank at (844) 797-7958. Estimates are free and someone answers around the clock.

Why a National $/Square-Foot Benchmark Fails in Burbank
A budget built on $150 per square foot works fine on a 1985 tract home in the Valley. On a 1935 Craftsman in Magnolia Park, that same money runs out before the drywall goes back up. The difference isn’t finish quality or labor rates. It’s what’s hiding inside the walls.
Burbank’s older single-family homes were built with lath-and-plaster walls over knob-and-tube wiring. The moment a remodel pulls a permit and opens a wall cavity, the city’s inspectors require that wiring to be removed or fully encapsulated before the wall can be closed. There’s no grandfathering your way around it, and you can’t insulate over it. This applies to Spanish Revival and Craftsman bungalows across Magnolia Park and the Rancho Equestrian district, which is exactly where a lot of Burbank’s remodel demand lives.
That requirement alone adds $8,000 to $18,000 to a project before a single cabinet or tile gets chosen. It’s the single biggest reason Burbank renovation budgets blow past what a homeowner calculated from a website calculator.
The Burbank Cost-Per-Square-Foot Matrix, by Era
Baseline cost per square foot changes with the decade your house was built, well before you pick a countertop. Here’s how the same scope of work prices across Burbank’s three dominant housing types:
| Housing type | Typical Burbank neighborhoods | Baseline $/sqft (mid-grade) | What drives the number |
|---|---|---|---|
| Pre-1950 lath-and-plaster (Craftsman, Spanish Revival) | Magnolia Park, Rancho Equestrian | $240-$320 | Knob-and-tube remediation, plaster repair, framing upgrades, hidden unpermitted additions |
| 1950s-60s drywall ranch | Hillside streets above the valley floor | $195-$265 | Original galvanized plumbing, undersized electrical panels, aging stucco |
| Post-war flats and mid-century blocks | Near downtown and the major corridors | $175-$240 | Shared-wall logistics, soft-story retrofit overlap, tighter site access |
Read that table before you read a single finish allowance. The gap between a Magnolia Park bungalow and a post-war flat is $65 to $80 per square foot, and none of it has anything to do with whether you choose KraftMaid or Wellborn cabinets.

How Much Does the Knob-and-Tube Premium Really Add?
Plan on $8,000 to $18,000 for electrical remediation on a pre-1950 Burbank home that’s having walls opened. That figure covers removal or encapsulation of the existing knob-and-tube, new grounded circuits to the affected rooms, and the inspection sign-off that lets the wall close. On a 1,400-square-foot bungalow getting a full kitchen and bath, it lands in the middle of that range. On a larger home with a service panel that also needs upgrading, it climbs toward the top.
What you should check before signing anything: ask whether the bid includes electrical remediation as a line item or hides it inside an “allowance.” A contractor who quotes a firm number without walking the attic and the panel is guessing, and you’ll pay for that guess later.
Why Exterior Scope Always Grows in Burbank’s Valley Heat
Burbank sits in a hot, dry San Fernando Valley basin, and Santa Ana wind events hammer south- and west-facing walls with driven heat. Stucco on those exposures cracks, chalks, and lets moisture in during the occasional winter rain. The result is a pattern we see constantly: a homeowner calls about a kitchen, and the walkthrough reveals stucco failure and roof flashing problems on the same sun-baked wall.
Hillside streets above the valley floor carry an extra layer. Fire-clearance rules and the city’s seismic retrofit enforcement are stricter there than in most neighboring cities, so exterior work often includes fire-resistant detailing and drainage that anticipates flash runoff. Budget for the exterior even when the interior is what started the conversation. Roof replacement in Burbank runs $8,000 to $20,000 depending on pitch and material, and it’s better to know that going in than to discover it mid-project.
What Renovation Line Items Cost in Burbank
Per-square-foot numbers are useful for a whole-house gut. For room-level work, use these line-item ranges instead:
| Project | Cost range |
|---|---|
| Kitchen remodel | $14,000-$45,000 |
| Small kitchen remodel | $9,000-$20,000 |
| Cabinet installation | $4,000-$13,000 |
| Countertop installation | $2,000-$6,500 |
| Bathroom remodel | $9,000-$28,000 |
| Walk-in shower installation | $4,500-$12,000 |
| Home addition | $45,000-$130,000 |
| ADU construction | $90,000-$220,000 |
| Garage conversion | $30,000-$80,000 |
Our scope covers the full spread, from foundation to finish line, so a long remodel doesn’t get handed off between trades. The finish materials in these estimates are specified products from verified partners like KraftMaid and Cambria, not allowances that balloon once you actually visit a showroom. A Cambria quartz countertop priced at $2,600 in the bid is a Cambria countertop at $2,600, not a placeholder that turns into $4,800 after selection. Every job is covered by our 730-Day Done Right Promise, if something isn’t done right, we make it right.
Why the Range Exists, and How to Get Rid of It
Contractors quote per-square-foot ranges because a range protects them from committing to a number they might lose money on. It’s a hedge, and you pay for it later. We don’t quote ranges on a signed scope. The figure you see is the figure you pay, with no-hassle upfront pricing and no surprise line items once the walls open. Where the knob-and-tube remediation and the stucco repair are known, they go in the number. Where they’re truly unknown until demolition, they’re priced as a defined contingency, not a blank check.
For larger remodels, we offer 0% financing for 18 months and $1,000 off projects over $10,000, which is how a pre-1950 full gut stays financially realistic. Our technicians have up to 12 years of experience, are background-checked, and arrive in uniform. If you’re comparing per-square-foot bids and one came in dramatically low, that’s usually electrical remediation missing from the scope, and it’s coming back as a change order.
When you’re ready to move, start with a home-specific walkthrough rather than a calculator.
FAQs
Budget $240 to $320 per square foot for a mid-grade whole-house remodel on a pre-1950 Burbank home. The upper end applies when the electrical system needs full remediation and the exterior stucco has failed on the south or west exposure. Add-ons like an addition or ADU push the per-square-foot figure higher. Call (844) 797-7958 for a walkthrough-based quote, and estimates are free.
Remodeling an existing space is almost always cheaper per square foot than adding new square footage, typically $185-$320 versus $450-$650. Adding an ADU or home addition means foundation, framing, roof, and new utility runs from scratch. If you need more room, weigh an addition against a garage conversion ($30,000-$80,000), which reuses an existing shell. Call (844) 797-7958 and we’ll price both options on your property so you can compare real numbers, not estimates.
Yes, in practice any wall that gets opened cannot be closed with active knob-and-tube wiring inside it. Burbank inspectors require removal or full encapsulation once the cavity is exposed, which is why it belongs in the budget from day one. That’s $8,000-$18,000 on a typical pre-1950 home. We flag it during the walkthrough instead of discovering it at demolition. Call (844) 797-7958 to schedule.
We can usually get an estimator to your Burbank address quickly, and calls are answered by a live person 24/7. A real per-square-foot number requires walking the attic, panel, and exterior, so the on-site visit is the honest way to quote. Call (844) 797-7958 now and we’ll get you on the schedule.
Get an Exact Number, Not a Range
Per-square-foot math gets you close. A walkthrough of your actual Burbank house gets you to a firm number you can plan around. Call (844) 797-7958 for a free project estimate and design consult, backed by upfront pricing and the 730-Day Done Right Promise. Live person, 24/7, ready to schedule your visit.
Written by the team at Groundwork Construction Co. of Burbank, serving Burbank, CA.
What Our Customers Say
"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."
- Angela Wong"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."
- Laura Bennett"Quality work and honest pricing. He is stretched across a few jobs at once so he is not always on site, though the carpenter who was there knew everything."
- Whitney Norris












