







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat Impact French Doors Really Cost in Burbank, CA
A set of impact French doors runs $3,500-$8,000 for the unit and standard install before anyone touches your wall. In Burbank, the number that matters is usually higher, because the framing behind that wall was never built for a double-door span. Call (844) 797-7958 for a free estimate, and we’ll price the door and the structural work together so there are no surprises after demo day.
Here’s the part nobody quotes you upfront. In a Magnolia Park Craftsman from 1935, opening a six-foot span means finding out what’s inside the wall: lath-and-plaster, maybe knob-and-tube wiring running right through the header zone, and a header sized for a single 32-inch door. That’s the real bill.

Why Burbank French Door Pricing Runs Higher Than the Online Guides Say
Generic cost guides assume a modern wall with dimensional lumber and a code-compliant opening already in place. Most of Burbank’s older single-family homes don’t have that. The 1920s-40s Spanish Revival and Craftsman bungalows in Magnolia Park and the Rancho Equestrian district routinely hide original framing, original wiring, and original plaster. Pull a permit and the hidden conditions surface on the first day.
We’ve opened walls in Burbank where the header was a 2×6 laid flat. That’s fine for a single door. Put a 300-pound French door unit and a wall of glass above it, and it’s not fine at all. The fix is a properly sized beam and new king and jack studs, and that line item is what separates a $4,000 job from an $11,000 one.
The hidden cost drivers specific to Burbank’s older housing stock
- Lath-and-plaster demo and patching. Plaster doesn’t cut clean like drywall. Removing a door-sized section means cutting back to sound plaster, installing new backing, and skim-coating to blend. Budget $600-$1,400 on a typical Magnolia Park bungalow.
- Knob-and-tube relocation. If the original wiring runs through the header zone (it often does), it has to be de-energized and rerouted before framing. That’s an electrician’s line item, not ours, and it typically adds $500-$1,200.
- Beam upsizing. A wide opening needs a correctly engineered header. New beam, new posts, hardware: $1,200-$2,800 depending on span and load above.
- Stucco repair on Spanish Revival exteriors. Matching three-coat stucco and the original texture takes a skilled hand. Figure $800-$1,800 for the exterior patch and blend.
- Trim and finish carpentry. Casing, thresholds, and interior paint around the new opening: $400-$900.
Impact-Rated vs. Decorative: The Distinction That Changes Everything in Burbank
An impact-rated door has been tested and certified to wind-borne debris and pressure standards. A decorative French door with tempered glass has not. They can look identical in a showroom. In Burbank’s hillside fire zones above the valley floor, where fire-clearance scrutiny is among the tightest in the region, only certified products satisfy the city’s requirements.
This is where the brand behind the door matters more than the door’s finish. Andersen and Marvin publish documented performance ratings for their French door lines, and that paperwork gives Burbank’s building department the certification data it needs to sign off at inspection. A no-name import can’t hand you that. When a plan checker asks for the test report, “it’s rated” isn’t an answer; a stamped spec sheet is.
We source through proven manufacturers for exactly this reason across our Windows & Doors work, and it’s the same approach we take on every exterior product we install.
A wide opening in a Santa Ana wind corridor
Burbank sits in a hot, dry Valley basin where Santa Ana wind events push hard against exposed walls. A wide French door opening interrupts the wall’s lateral resistance, so it has to be sized and anchored to California’s residential code for large openings. On hillside permits above the Verdugo foothills, that can mean a licensed engineer’s stamp before the city will issue. Plan on $400-$1,200 for engineering on those jobs. It’s not optional, and skipping it just moves the problem to inspection day.

What Impact French Doors Cost in Burbank: Line-Item Pricing
Here’s how the numbers break down for a typical Burbank install. Every project crosses the $10,000 mark once structural work is included, which means our $1,000 off projects over $10,000 applies, and 0% financing for 18 months turns a large-ticket job into a manageable monthly payment.
| Item | Typical cost range |
|---|---|
| Impact-rated French door unit (pair) | $3,500-$8,000 |
| Standard installation (no structural change) | $1,200-$2,500 |
| Header and beam upsizing | $1,200-$2,800 |
| Knob-and-tube relocation | $500-$1,200 |
| Lath-and-plaster demo and patch | $600-$1,400 |
| Stucco repair and texture blend | $800-$1,800 |
| Engineering stamp (hillside permits) | $400-$1,200 |
| City of Burbank permit fees | $300-$900 |
| Finish carpentry and paint | $400-$900 |
Add those up for a Magnolia Park bungalow with knob-and-tube and a plaster interior, and you land between $9,000 and $17,000 all-in. A 1960s ranch tract home near downtown with drywall and modern wiring can come in closer to $5,500-$9,000. That spread is why we walk the wall before we quote.
Common Local Scenarios We Price Every Week
Spanish Revival in Magnolia Park: three-coat stucco exterior, plaster interior, original wiring. The door is the easy part. The stucco blend and wiring relocation drive the budget.
Rancho Equestrian Craftsman: often a converted garage or an unpermitted addition behind the wall. That gets discovered on day one, and it turns a door swap into a small structural job we have to price and permit correctly. It also means the homeowner gets a legitimate paper trail where there wasn’t one before.
Hillside home above the Verdugo foothills: fire zone, engineer’s stamp, wind-load anchoring. Tightest permit scrutiny of any job type we run in Burbank.
Post-war flat near downtown: drywall, modern framing, straightforward. This is the job that comes in closest to the online guides, and it’s the reason those guides exist in the first place.
Groundwork Construction Co. of Burbank handles the whole opening from foundation to finish line, one crew, one accountable number, covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. Our technicians have up to 12 years of experience, and every one is background-checked, uniformed, and arrives with the job scope in hand. Calls are answered by a live person, 24/7. You’ll see more of what we handle across the Burbank service area.
FAQs
Impact French doors in Burbank typically run $3,500-$8,000 for the unit alone, and $5,500-$17,000 installed once structural work, wiring, plaster or stucco repair, and permits are included. The low end fits a post-war home with modern framing; the high end fits a Magnolia Park bungalow with original wiring and plaster. Call (844) 797-7958 for an exact quote, and estimates are free.
Repair is cheaper up front but rarely the right answer if your goal is impact certification. Patching a rotted sill runs $300-$800; re-anchoring loose hinges runs less. But if the frame or opening doesn’t meet impact standards, repair doesn’t get you the certification the city requires in fire zones. If you need the door to pass inspection, replace. Call (844) 797-7958 and we’ll tell you straight which one you actually need.
Yes. Any exterior door change that alters the opening or affects structural framing requires a City of Burbank permit, and it’s a requirement we build into every quote. The permit itself runs $300-$900, and jobs in hillside fire zones may also require an engineer’s stamp before the city approves. Budget for it from the start. Call (844) 797-7958 for a free estimate that lists permit costs separately so you see exactly what it covers.
Yes. We walk the wall, check the framing, look for knob-and-tube, and test the plaster or stucco before quoting, so the number is grounded in your actual house, not a national average. Our quotes come with no-hassle upfront pricing: the number you see is the number you pay, with no changes after demo. Call (844) 797-7958 to book a free estimate.
Whether you’re in a 1935 Magnolia Park Craftsman or a 1960s ranch near downtown, the right number depends on what’s behind the wall, and we’d rather show you than guess. Reach Groundwork Construction Co. of Burbank at (844) 797-7958 for a free estimate and design consult. Upfront pricing, the 730-Day Done Right Promise, and a crew that shows up when it says it will. Built to last, backed in writing.
Written by the team at Groundwork Construction Co. of Burbank, serving Burbank, CA.
What Our Customers Say
"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."
- Angela Wong"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."
- Laura Bennett"Quality work and honest pricing. He is stretched across a few jobs at once so he is not always on site, though the carpenter who was there knew everything."
- Whitney Norris












