







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Much Does Impact Window Installation Cost in Burbank?
Impact window installation in Burbank runs $8,000 to $25,000 for a whole-home project, and most single-family homes here land between $12,000 and $18,000 for a full replacement. A single impact window swapped into an existing opening typically costs $700 to $1,400 installed, while larger picture windows, sliding glass doors and second-story openings push the number higher. The range is wide because Burbank’s housing stock is wide – a 1920s bungalow off Magnolia Park and a 1980s hillside house in the Verdugo foothills need very different windows to meet the same standard.
Key Takeaways
- Whole-home impact window installation in Burbank: $8,000 – $25,000.
- Single-window retrofit: roughly $700 – $1,400 installed.
- Burbank sits in a high-fire-severity zone, and impact-rated glazing helps with ember and radiant-heat exposure on top of noise and security.
- Upfront pricing and a free design consult mean the number you see is the number you pay.
- Calls are answered by a live person 24/7 – call (844) 797-7958.

Impact Window Installation Cost Breakdown (2026)
Here’s how the money splits up on a typical Burbank impact window project. These ranges reflect what homeowners actually pay in this market, including materials, labor, permits and disposal.
| Line Item | Typical Burbank Cost |
|---|---|
| Impact windows (whole-home installation, 8 – 15 openings) | $8,000 – $25,000 |
| Per-window cost (standard impact unit, installed) | $700 – $1,400 |
| Large picture or fixed impact window (installed) | $1,500 – $3,500 |
| Impact-rated sliding glass door (installed) | $2,800 – $6,500 |
| Second-story or ladder-access install premium | $150 – $400 per opening |
| Stucco repair and exterior finishing | $250 – $900 per opening |
| Permit and inspection fees | $350 – $1,200 |
| Old window removal and haul-away | Often included; $40 – $90 per unit if billed |
What pushes a project toward the top of the range? Frame material and glass build are the biggest drivers. Andersen and Marvin impact lines cost more than a standard vinyl impact unit, and they’re worth it when you’re upgrading the whole envelope of a home you plan to keep. Second-story openings, non-standard sizing in older Burbank homes, and thick plaster walls all add labor. What pulls it toward the bottom? A straightforward single-story ranch with standard-sized openings, a mid-range glass package, and a house where we can swap units without touching the stucco.
One more thing worth knowing: an impact window isn’t just laminated glass in a frame. The whole assembly is rated as a unit – a laminated or laminated-insulated glass package in a reinforced frame, tested together. That’s why a real impact window costs more than a standard window plus a film. If you’ve looked at basic window replacement in Burbank, the jump from a standard $4,500 – $15,000 replacement job to an $8,000 – $25,000 impact job is mostly paying for that tested assembly and the heavier frame that holds it.
What Affects Impact Window Installation Pricing in Burbank
- Fire zone requirements. Much of Burbank’s hillside area near the Verdugo Mountains sits in high fire severity zones, and glazing requirements there are stricter than in the flat neighborhoods. Dual-pane tempered or laminated impact glass is common for those addresses. A home on the valley floor near downtown Burbank may not need the same spec as one up in the hills, and that changes the price.
- Home age and wall construction. Bungalows in Magnolia Park and the older blocks near Chandler Park often have thick plaster and framing that wasn’t sized for a modern heavy impact unit. We frequently find original 1940s framing that needs reinforcement before a new window goes in. Newer builds in the Media District and along the Rancho Equestrian area are more straightforward.
- Number and size of openings. Seven windows versus fourteen is the single biggest swing in a project. Big picture windows and sliding doors cost more per opening than standard double-hungs.
- Glass package and frame material. Basic laminated impact glass sits at the bottom. Adding low-E coatings for Burbank’s summer heat, upgrading to a premium wood-and-clad frame from a brand like Andersen or Marvin, or matching historic profiles on an older home all move the number.
- Access and stories. A single-story home with clear access is cheaper to work on than a hillside house with tight setbacks, steep driveway access, or second-floor openings that require scaffolding.
- Permits and inspection. Burbank requires permits for window replacement, and impact assemblies may need a closer look at the opening’s structural attachment. That’s a real cost, not a surprise add-on. Upfront pricing means it’s in the quote before we start.

How Impact Window Installation Works and What to Expect
On a typical whole-home impact window job in Burbank, we measure every opening, confirm the rating each window needs, order the units, then install. Most of the work happens in a set sequence so the house stays secure each night. Here’s the general shape of it, without the dangerous parts you shouldn’t be doing yourself:
- Measure and spec. We measure each opening and note which ones face the hills or sit in a fire severity zone so the right rating goes in the right place.
- Order and permit. Units are ordered and the Burbank permit is pulled. Impact windows are a tested assembly, so the spec matters from the start.
- Remove and prepare the opening. Old units come out, the opening is checked for framing issues, and any rot or under-sized framing is addressed.
- Install and seal. The new unit goes in with flashing, sealant and proper attachment. We’re not going to walk you through installing one yourself – a heavy impact unit above ground level is a two-person job with real injury risk, and a bad seal on a Burbank home is a water-intrusion problem you’ll find a year later.
- Finish and test. Stucco is patched and finished, screens and hardware go back on, and every unit gets opened and closed to confirm a clean fit.
If your project grows beyond windows into doors or a whole-envelope upgrade, we handle that too – the same team covers home construction and remodeling from foundation to finish line.
Do Impact Windows Actually Help in Burbank?
Yes, and the reasons are specific to this city. Burbank sits against the Verdugo Mountains, and the hillside neighborhoods deal with wildfire exposure every fire season – embers and radiant heat are the real threat to a home’s openings, and impact-rated glazing is built to hold up to both better than standard glass. Down in the flats, the benefit shifts: impact windows cut street and freeway noise from the 5 and 134, they add a security layer that a standard single-pane doesn’t have, and the laminated glass holds together instead of shattering. A home near the airport corridor also notices the noise drop. So the value isn’t one thing – it’s fire resistance in the hills, quiet and security on the valley floor, and a stronger envelope either way.
Impact Windows vs. Standard Window Replacement: Is It Cheaper to Repair or Replace?
Replace is almost always the better call over repairing a failing window, and impact windows are worth the premium when you’re replacing anyway. A single piece of broken glass can be repaired for a few hundred dollars, but that only makes sense on a window that’s otherwise sound. Once frames are tired, seals are failing and the opening is 30 or 40 years old, you’re paying to prop up a window that’s past its service life. On a Burbank home, a standard window replacement project runs $4,500 – $15,000, while impact windows run $8,000 – $25,000. The gap is real, but so is the difference: the impact assembly is tested as a unit, adds that fire and noise protection, and costs less over the life of the home than replacing twice. If your windows are already at end of life, going impact once is the cheaper long run.
How to Save on Impact Window Installation in Burbank
You don’t need to cut quality to bring the number down. These moves actually work:
- Bundle the whole home. Per-window cost drops when we’re installing fourteen units instead of three. Labor and staging spread across the project.
- Prioritize the openings that matter. If budget is tight, start with the windows the sun and hills hit hardest and the ones that carry the most noise. Phase the rest.
- Standardize sizes where you can. Non-standard openings cost more to fabricate. Where the architecture allows a standard size, take it.
- Ask about financing. We offer 0% financing for 18 months and $1,000 off projects over $10,000 – that’s real money off a job that typically sits in that range.
- Get the free design consult. A free project estimate and design consult means you see the real number before you commit. Call (844) 797-7958 for that.
What Brand and Guarantee Should You Expect?
Window quality lives or dies on the brand and the glass package, and we work with a curated set of top-tier suppliers, including Andersen and Marvin for windows. Those names aren’t marketing filler – they’re the difference between a frame that still seals in year ten and one that doesn’t. Every project is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space, and it applies to impact window installations the same as any other job. Background-checked technicians arrive in uniform, and our technicians have up to 12 years of experience. Calls are answered by a live person 24/7 – no voicemail black holes. If you’re comparing us to another crew, ask them what happens in year two if a seal fails. We’ll tell you in writing before you sign.
Why Burbank Homeowners Choose Groundwork Construction Co.
We’re a full-scope construction partner, which matters when a window project turns into a stucco repair, a framing fix or a door replacement. One contractor handles it, so there’s no finger-pointing between trades. We’ve been in business since 2014 and proudly serve local communities across our markets. The brand partners you’ll see on your windows – Andersen, Marvin, and the rest of our supplier lineup – are names we stand behind. Upfront pricing means the number in the quote is the number you pay, and the 730-Day Done Right Promise backs the work in writing. Whether you’re in Magnolia Park, the Rancho Equestrian area, near downtown, or up in the hills, the same standard applies. To see what we cover across the city, start with our Burbank service area.
FAQs – Impact Window Installation Cost
How much do impact windows cost in Burbank?
Whole-home impact window installation in Burbank runs $8,000 – $25,000, with most full-home jobs landing between $12,000 and $18,000. Single windows installed run about $700 – $1,400. Call (844) 797-7958 for an exact quote – estimates are free.
Can you install impact windows in a Burbank fire severity zone?
Yes – much of Burbank’s hillside area near the Verdugo Mountains is in a high fire severity zone, and we spec glazing and frames to meet those requirements, typically $1,000 – $3,000 more on a whole-home project than a valley-floor home. Call (844) 797-7958 and we’ll confirm what your address needs.
Is it cheaper to repair or replace a window in Burbank?
Repair is cheaper only when the window is otherwise sound – a broken pane runs a few hundred dollars. Once frames and seals are failing, replacement pays off, and compared to a $4,500 – $15,000 standard replacement, impact windows at $8,000 – $25,000 add tested fire, noise and security protection for the long run. Call (844) 797-7958 to talk through your situation.
How much does a sliding glass door cost with impact glass in Burbank?
An impact-rated sliding glass door installed in Burbank runs $2,800 – $6,500, depending on size, frame material and the rating your address requires. Call (844) 797-7958 for a free estimate – upfront pricing, no surprises.
Can you come today for an impact window estimate in Burbank?
We answer the phone 24/7 with a live person, and we schedule free estimates quickly across Burbank. Call (844) 797-7958 and we’ll get you on the calendar – the consult and estimate cost you nothing.
Does impact window installation in Burbank need a permit?
Yes, window replacement in Burbank requires a permit, and impact assemblies may need a closer review of how the unit attaches to the opening. Permit and inspection fees typically run $350 – $1,200 and are built into your upfront quote. Call (844) 797-7958 with questions.
Pricing reflects the Burbank market as of 2026. Groundwork Construction Co. of Burbank offers free estimates – call (844) 797-7958.
What Our Customers Say
"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."
- Angela Wong"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."
- Laura Bennett"Quality work and honest pricing. He is stretched across a few jobs at once so he is not always on site, though the carpenter who was there knew everything."
- Whitney Norris












