







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterImpact Windows & Doors in Burbank, CA
Impact windows and doors in Burbank, CA are laminated glazing systems built to hold together under wind-borne debris and forced entry, and a typical whole-home installation here runs $18,000 to $42,000 depending on opening count, frame material and whether you’re going with vinyl or aluminum. You need them if you’re in a high-wind or wildfire-exposure zone, if you’re tired of hearing the 134 freeway from your living room, or if your single-pane aluminum sliders from the 1970s are leaking heat every July and August. We install impact-rated windows and doors across Burbank as part of our full Windows & Doors service line, and we back the work with our 730-Day Done Right Promise: if a single unit doesn’t seal, latch or drain the way it should, we come back and make it right.
Call (844) 797-7958 and a live person picks up, any hour of any day. No voicemail, no waiting until Monday. We’ll set a free project estimate and design consult, walk your openings with you, and put the numbers in writing before anyone touches a frame.
Burbank sits in a bowl where the Verdugo Mountains funnel hot, dry Santa Ana wind straight down through the Magnolia Park and Rancho Equestrian neighborhoods, and the same geography traps heat in the valley floor. That combination is exactly why impact glazing makes practical sense here, not just code sense. It’s also why we solder the details: correct drainage plane behind the nail fin, low-E coatings tuned for western exposure, and hardware that stays smooth through a decade of 100-degree afternoons. Our technicians have up to 12 years of experience on installations just like yours, and every one of them is background-checked and arrives in uniform.
Key Takeaways
- Impact windows and doors in Burbank typically cost $18,000 to $42,000 for a whole home, or $600 to $1,400 per window installed.
- They reduce noise, cut cooling bills in a valley that bakes from May through October, and add a layer of forced-entry resistance.
- Permits go through Burbank’s Building & Safety division, and impact retrofits often trigger a Title 24 energy compliance check.
- Our 730-Day Done Right Promise covers workmanship for two full years, and calls are answered by a live person around the clock.
- Upfront pricing, no surprises, plus $1,000 off projects over $10,000 and 0% financing for 18 months.

When You Need Impact Windows & Doors
Most Burbank homeowners don’t wake up one morning wanting impact glazing. They call us because something specific pushed them there. Here are the triggers we see most often, and each one is a real reason, not a sales talking point.
- You live in or near a designated wildfire-exposure zone. The hillside streets above Glenoaks and the edges of the Verdugo foothills carry real ember and radiant-heat risk. Impact-rated glass won’t stop a fire, but laminated units resist shattering from windblown debris and hold the envelope longer, which buys time and keeps burning embers out of the house.
- Your 1960s or 1970s single-pane aluminum is failing. We see a lot of original sliding windows in the Rancho and Magnolia Park tracts with fogged seals, corroded tracks and frames that let in a visible draft. Impact units replace the whole assembly, not just the glass, so the leak source goes away.
- Noise from the 134, the 5 or Hollywood Burbank Airport is wearing you down. Laminated impact glass cuts sound noticeably better than standard insulated glass. If you’re under a flight path or a few blocks off the freeway, you’ll hear the difference the first night.
- You’re dealing with break-in worry. A laminated impact unit resists impact for a meaningful window of time where ordinary glass simply pops. Several Burbank neighborhoods have seen a rise in smash-and-grab attempts on rear sliders, and impact-rated doors change that math.
- You have young kids or a pool. Impact glass doesn’t shatter into long shards the way standard annealed glass does, which matters if a baseball or a running toddler hits a patio door.
- You’re remodeling and want to lock in energy performance. If you’re already touching framing or replacing a slider, upgrading to impact glazing now costs far less than coming back to it later, and it counts toward the energy compliance your permit will require.
If any of those sound like your house, that’s enough reason to get a look. We’ll tell you straight whether impact glazing is the right call for your specific openings or whether a standard high-performance unit would serve you better. We don’t sell impact glass to people who don’t need it.
Our Impact Windows & Doors Process
We keep the process tight and predictable, because the last thing you want during a window project is a crew that disappears for a week with your house half-open. Here’s how we run it from first call to final sealant bead.
- Free estimate and design consult. We walk every opening with you, measure true sizes, check the condition of the framing and the surrounding drywall, and talk through frame material (vinyl versus aluminum versus a wood-clad option), glass packages and hardware. You get a written, line-item estimate. The number you see is the number you pay.
- Permit and Title 24 compliance. Burbank requires a permit for window and door replacement, and because you’re in a climate zone that pushes energy rules, most retrofits need a Title 24 energy compliance check on the glazing assembly. We handle the submittal to Building & Safety and any inspection scheduling. You don’t chase the paperwork.
- Product selection and order. You choose from the brands we carry, and we help you match the right unit to each opening. We use proven manufacturers for glazing and structural components, and when a project involves exterior trim or hardscape tie-ins, the same quality standard carries through the James Hardie products and hardscape brands we work with. Lead times on impact units run longer than standard windows, so we set expectations up front and tell you the real date, not the optimistic one.
- Installation day. Our background-checked, uniformed technicians protect floors, set the drainage and flashing correctly, shim and seal every unit, and most jobs complete in a single visit. We clean up as we go, and we don’t leave an opening unsealed overnight.
- Final walkthrough and sign-off. We operate every window, test every latch and lock, and walk the job with you before we consider it done. Any punch item gets fixed on the spot or scheduled before we leave.
- Two-year workmanship coverage. Every install is covered by our 730-Day Done Right Promise. If a unit sticks, leaks, or doesn’t perform, we come back and make it right. That’s built to last, backed in writing.
If you’re comparing bids and one of them is dramatically cheaper, ask what’s missing: flashing, permit, Title 24, or a warranty that actually covers labor. Ours covers it, and we say so in writing.

Impact Windows & Doors Pricing in Burbank
Impact windows and doors cost more than standard replacements because the glass itself is laminated and the frame is engineered to a higher test standard. Here’s what Burbank homeowners can realistically expect. These are ranges from our own estimates, not national averages pulled from a website.
| Item | Typical Burbank range |
|---|---|
| Single impact window, installed (vinyl) | $600 – $1,200 |
| Single impact window, installed (aluminum) | $800 – $1,400 |
| Impact sliding glass door, installed | $2,400 – $5,500 |
| Impact entry or patio door, installed | $1,800 – $4,200 |
| Whole-home impact package (12 – 20 openings) | $18,000 – $42,000 |
| Permit and Title 24 compliance | $350 – $900 |
What moves the number up or down: frame material (vinyl is the budget-friendly workhorse, aluminum costs more and holds up to heat and sun better), glass package (low-E coatings, argon fill and different visible-light ratings all shift price), opening count and size, whether the existing framing is sound or needs repair, and second-story access. A hillside home with a lot of glass and awkward scaffolding will land at the top of the range. A single-story tract home with standardized openings lands toward the bottom.
We keep large projects within reach with two standing offers: $1,000 off projects over $10,000, and 0% financing for 18 months. Combined with upfront pricing, no surprises, that means you can plan a whole-home impact upgrade without guessing at the total. Book a free project estimate and we’ll give you the real number for your house, not a range off a chart.
One more thing worth checking before you book anything: Burbank has its own permitting quirks, and some properties near the airport or in older tracts have deed restrictions or HOA rules about exterior profiles and color. We’ll flag those at the consult so you don’t order a unit you can’t legally install. If you’d rather start with the broader picture, our home page lays out how all of our service lines fit together, and our Burbank service area page covers the neighborhoods we work in.
FAQs – Impact Windows & Doors
How much do impact windows cost in Burbank?
Expect $600 to $1,400 per window installed, and $18,000 to $42,000 for a whole-home package of 12 to 20 openings. Aluminum frames and larger glass push toward the higher end, and adding the permit and Title 24 compliance typically runs $350 to $900. Call (844) 797-7958 for an exact quote for your house. Estimates are free and there’s no pressure.
Do I need a permit for impact windows in Burbank?
Yes. Burbank’s Building & Safety division requires a permit for window and door replacement, and because the glazing changes the energy performance of the envelope, most retrofits also trigger a Title 24 compliance check. We handle the submittal and inspection scheduling for you, so you’re not the one standing in line at the counter. Ask us about it during your free consult.
How long does installation take?
Most homes are done in a single visit, though a whole-home job with 15 or more openings can stretch to two or three days. The bigger timeline variable is the product itself: impact units are built to order and lead times run longer than standard windows, sometimes several weeks. We’ll give you the real lead date up front and keep you updated. Call (844) 797-7958 to get your project on the schedule.
Will impact windows actually lower my energy bills in Burbank?
They typically do, especially in a house with old single-pane aluminum. Impact units come with modern glass packages and tighter frames, so they cut solar heat gain during Burbank’s long hot season and reduce the load on your AC. The savings depend on your home’s size, orientation and existing insulation, so we’ll give you a realistic estimate rather than an inflated promise. Book a free estimate and we’ll talk through what’s realistic for your house.
Is it cheaper to repair my existing windows or replace them?
For a single cracked pane or a sticky latch, repair is almost always cheaper and we’ll say so. But once you have multiple fogged seals, corroded frames and drafts across a whole side of the house, replacing the assemblies typically costs less over five years than repeated repairs, and you get the impact rating and energy performance into the bargain. We’ll give you both numbers and let you decide. Call (844) 797-7958 for a straight answer.
What is the 730-Day Done Right Promise?
It’s our workmanship guarantee: for two full years after your installation, if something we did isn’t right, we come back and fix it at no charge. That covers installation and performance issues, not accidents or misuse. It’s one of the longest workmanship guarantees in residential construction, and it’s why we put the installation details in writing before we start.
Impact windows and doors in Burbank are a real investment, and we treat them that way. Whether you’re replacing one failing slider or upgrading the whole envelope, you get a live person on the phone around the clock, background-checked technicians in uniform, upfront pricing with no surprises, and a promise that holds for two years. From foundation to finish line, we handle the permit, the product, the install and the cleanup. Call Groundwork Construction Co. of Burbank at (844) 797-7958 for a free estimate and design consult, and let’s get your windows working the way they should.
Written by the team at Groundwork Construction Co. of Burbank, serving Burbank.


