







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Much Does Metal Roof Installation Cost in Burbank?
Metal roof installation in Burbank typically runs $15,000 to $40,000 for a full residential roof, and most Burbank homes land in the $19,000 – $28,000 range once tear-off, underlayment and permits are included. A basic standing-seam job on a simple 1,400-square-foot ranch in Magnolia Park sits near the bottom of that range, while a complex stone-coated steel roof on a two-story hillside home off Kenneth Road with dormers and valleys pushes toward the top. Wherever your number lands, we put it in writing before a single panel comes off the roof, so the figure you approve is the figure you pay.

Metal Roof Installation Cost Breakdown (2026)
Here’s how the money breaks down on a typical Burbank metal roof. The total depends on roof size, pitch and panel type, but these line items show you where every dollar goes.
| Line Item | Typical Range | What It Covers |
|---|---|---|
| Full standing-seam metal roof (installed) | $15,000 – $40,000 | Materials, labor, underlayment, trim, overall project |
| Stone-coated steel roof (installed) | $16,000 – $34,000 | Tile-look steel panels, weighted for curb appeal |
| Corrugated / exposed-fastener panels | $12,000 – $24,000 | Budget metal option, more common on shops and additions |
| Tear-off of existing roof | $2,500 – $6,000 | Removal and disposal of old shingles or tile |
| Underlayment & deck prep | $1,500 – $4,500 | High-temp underlayment, repairing or replacing rotten sheathing |
| Flashing, valleys, ridge caps | $1,200 – $3,500 | Sealing penetrations and complex transition areas |
| Permits (City of Burbank) | $400 – $1,200 | Roofing permit and required inspections |
| Skylight replacement / addition | $600 – $2,500 | Per unit, reflashed for a metal roof |
| Gutters & downspouts | $900 – $2,800 | Seamless aluminum or steel, sized to roof |
Metal costs more up front than asphalt shingles, and in Burbank that gap is worth naming: a standard roof replacement runs $8,000 – $20,000, while metal starts at $15,000 and climbs. What pushes you toward the top of the metal range is roof complexity more than square footage. A straightforward gable roof is fast to panel. A Burbank hillside home with three gables, a low-slope section over an addition and a chimney to flash will eat labor hours on every cut and seam. Panel choice matters too. Standing seam is the premium option because the seams are raised and hidden fasteners mean no exposed screws, while exposed-fastener corrugated panels are cheaper and better suited to outbuildings or covered patios than a main residence. Ask for the free estimate with the line items spelled out, and you’ll see exactly which of these is driving your number.
What Affects Metal Roof Installation Pricing in Burbank
- Roof size and pitch. A steeper roof slows every step and requires more safety rigging, so a 6/12 pitch costs noticeably more to panel than a walkable 4/12. Square footage sets the baseline; pitch adds the labor premium on top.
- Roof complexity. Valleys, hips, dormers and multiple roof planes mean more cutting, more flashing and more chances for leaks if it’s rushed. Homes tucked into the Burbank hills above Sunset Canyon tend to have more of these than flat-lot homes in Rancho Equestrian.
- Panel type and finish. Standing seam, stone-coated steel and corrugated panels land in different price tiers, and premium paint finishes (Kynar-based coatings that hold color against UV) add cost but last far longer under Burbank’s sun.
- Existing roof and deck condition. If the old roof is a heavy clay tile, tear-off and disposal cost more than stripping asphalt shingles. Rotten sheathing found under the old roof gets replaced at an added per-sheet cost, which is why we inspect the deck before quoting, not after.
- Heat and fire considerations. Burbank sits in a high fire-hazard zone in several neighborhoods, and metal roofing is one of the most fire-resistant options you can put up. The right underlayment and Class A assembly matter here, and they’re not the cheapest components on the list – skipping them is false savings.
- Attic ventilation and insulation. Burbank summers push attic temperatures high. A metal roof paired with proper ridge and intake ventilation keeps the heat moving, and adding it during installation costs far less than retrofitting later.

How to Save on Metal Roof Installation
You can trim real money off a metal roof without cutting corners where it counts. Here’s where the savings live:
- Keep the existing roof deck if it’s sound. If the sheathing is solid, you may not need a full tear-off in every situation, which saves the removal and disposal line. We’ll tell you honestly whether your deck qualifies.
- Time the job outside peak season. Roofing demand spikes after storm seasons and in spring. Scheduling in a quieter window can improve your pricing and get you on the calendar faster.
- Choose one panel type and stick with it. Mixing materials across the roof and outbuildings adds labor. A single consistent spec is cheaper to install.
- Bundle related work. If you’re already replacing gutters, adding ventilation or fixing skylights, doing it during the roof installation saves setup and labor versus coming back later. Our home page lays out the full range of services we handle under one roof, so you’re not juggling three contractors.
- Use the standing promotions. We offer 0% financing for 18 months and $1,000 off projects over $10,000, which softens a large up-front bill without hidden fees. Pair that with a free estimate and you can compare real numbers before you commit.
Save the call for last and it’ll cost you clarity. Call (844) 797-7958 for a free estimate and we’ll put the numbers in writing – the price you see is the price you pay.
Frequently Asked Questions – Metal Roof Installation Cost
How much does metal roof installation cost in Burbank?
Metal roof installation in Burbank runs $15,000 to $40,000, with most homes falling in the $19,000 – $28,000 range. Call (844) 797-7958 for an exact quote – estimates are free.
Is a metal roof cheaper than asphalt shingles?
No – metal costs more up front. A metal roof ($15,000 – $40,000) runs roughly 40% to double the cost of an asphalt roof replacement ($8,000 – $20,000). It earns that back over a long service life and through lower cooling load in Burbank heat, but the initial bill is higher. Call us and we’ll show you both numbers side by side.
How long does a metal roof last compared to other roofs?
A well-installed metal roof commonly lasts 40 to 70 years, compared with roughly 20 for asphalt shingles. That long horizon is part of why the higher up-front number works out, especially on a home you plan to keep. We back every install with the 730-Day Done Right Promise – if it’s not done right, we make it right.
Can you install a metal roof over the existing roof?
Sometimes, but not always. Over-construction is allowed in some cases when the deck is sound and the local code permits it, saving the tear-off cost ($2,500 – $6,000). We inspect the deck first and tell you which path makes sense rather than assuming.
Does metal roofing hurt resale value in Burbank?
No – a metal roof is generally a value-add in Burbank, where fire resistance and energy savings are selling points. Buyers recognize the lower maintenance and long life. If you’re weighing it against a full roof replacement, see how the numbers stack up on our Burbank service area page.
Why Burbank Homeowners Choose Groundwork Construction Co.
We’ve been building and roofing in the Burbank area since 2014, and we’ve learned that metal roofing is one of the highest-stakes purchases a homeowner makes. It’s also one of the easiest to get wrong if the contractor cuts underlayment, rushes flashing or walks off when a leak shows up two seasons later. That’s why every project comes with the 730-Day Done Right Promise – one of the longest workmanship guarantees in residential construction – and why our technicians have up to 12 years of experience on roofs like yours.
When you call, a live person answers 24 hours a day, 7 days a week. No voicemail, no waiting until Monday. Our technicians are background-checked and arrive in uniform. And we work with trusted brands like GAF and CertainTeed on roofs, so you’re choosing quality materials, not just whatever’s in stock. If you want a straight number and a crew that shows up, call (844) 797-7958 for a free estimate.
Related Projects We Handle in Burbank
Full roof replacement
If a metal roof isn’t the right fit for your budget, a full roof replacement runs $8,000 – $20,000 and still earns the same workmanship promise.
Targeted roof repairs
A leak at a valley or flashing isn’t always a full replacement. roof repair runs $400 – $1,800 and we’ll tell you honestly whether repair or replacement is the smarter call.
Whole-home updates
Roof work often pairs with other upgrades. If you’re planning a kitchen remodel ($14,000 – $45,000) or adding space, we handle both under one contract with the same guarantee. And when it’s time to finish the exterior, window replacement ($4,500 – $15,000) and fence installation ($3,500 – $9,000 vinyl) round out a clean, cohesive result.
Get Your Free Metal Roof Estimate in Burbank
Metal roofing is a long-horizon investment that rewards good workmanship. A number on paper only means something if the crew behind it stands by the job. Call Groundwork Construction Co. of Burbank at (844) 797-7958 for a free estimate and a clear, no-surprises price. The number you see is the number you pay, we answer live 24/7, and every install is backed by the 730-Day Done Right Promise. Built to last, backed in writing.
Pricing reflects the Burbank market as of 2026. Groundwork Construction Co. of Burbank offers free estimates – call (844) 797-7958.
Written by the team at Groundwork Construction Co.
What Our Customers Say
"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."
- Angela Wong"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."
- Laura Bennett"Quality work and honest pricing. He is stretched across a few jobs at once so he is not always on site, though the carpenter who was there knew everything."
- Whitney Norris












