







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in San Gabriel, CA: What the Job Actually Costs and How Long It Takes
Most San Gabriel paver driveway jobs run $7,000 to $18,000 and take three to six working days from demo to final compaction. The variability comes from what’s underneath the old surface and how much base work your lot needs, not from the pavers themselves. We walk the driveway, check the subgrade, and hand you a written line-item quote before anything moves. Call (844) 797-7958 to schedule that free on-site estimate.
How We Build a Paver Driveway, Stage by Stage

A paver driveway is mostly base work. The pavers are the last 10% of the job and the least interesting part of it. Here’s the sequence we follow on a typical San Gabriel driveway, with the decisions you’ll make along the way.
Stage 1 – Site walk and layout (day 1, about 2 hours). We check the slope away from the garage, mark the apron line at the street, and confirm where the downspouts and any irrigation discharge. You decide the paver pattern and where the driveway meets the walkway or planter edge. If your property is in the Mission District and the driveway frontage is visible from the street, we flag early whether the finish needs to read as compatible with the surrounding stucco-and-tile character before you commit to a color.
Stage 2 – Demo and haul-off (day 1, 4 to 6 hours). Existing concrete or asphalt comes out, along with any old base. A single-car driveway generates roughly 6 to 10 cubic yards of debris, which we haul same day. If we find a root system from a street tree pushing up the apron, this is when it gets dealt with – not after the pavers go down.
Stage 3 – Excavation, base, and compaction (days 2 into 3). This is the stage that decides whether your driveway is flat in five years. We excavate 8 to 12 inches depending on soil and traffic, lay a compacted aggregate base in 2 to 3-inch lifts, and run a plate compactor over each lift. Base prep alone can eat a full day on a 400-square-foot driveway. You don’t have to decide anything here, but you should expect to see the driveway looking like a gravel pit for a day.
Stage 4 – Edge restraint, bedding sand, and pavers (day 3 into 4). We set a concrete or steel edge restraint on the sides that don’t abut a curb, screed the bedding sand, and lay the pavers. A two-person crew sets 250 to 400 square feet per day on a straightforward rectangular field.
Stage 5 – Cutting, compaction, and joint sand (days 4 to 6). Border cuts at the garage apron and street go in last. We run a second compaction pass over the finished field, sweep polymeric joint sand in, and mist it to set. You make one final decision here: whether to add a sealer now or wait a season. We’ll give you the honest answer for your specific paver type rather than sell it by default.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
For a driveway – not a patio – here’s what we put in front of homeowners in San Gabriel and the trade-off on each.
- Concrete pavers, 60mm vs. 80mm. 60mm is the standard for pedestrian and light vehicle use and lands near the bottom of our range. 80mm is the spec for driveways that carry an SUV or a work truck daily, and it adds roughly 10 to 15% to the material cost. For a two-car household in San Gabriel, we usually steer toward 80mm.
- Interlocking shapes vs. running bond. An interlocking pattern like a herringbone resists tire shear better on a driveway, but it costs more in cutting waste and labor. A simple running bond is cheaper and reads calmer against a Spanish Colonial facade.
- Color-through vs. surface-sealed color. Integral color runs through the paver and holds up for decades. Surface-applied color fades faster. The cost difference is modest and the longevity difference is not.
- Permeable vs. conventional. Permeable pavers with open joints and a gravel subbase cost more upfront and need a clean stone reservoir beneath them. They make sense if your lot drains poorly or your apron ponds after winter rain.
- Belgard vs. other paver lines. Belgard is a brand we trust for dimensional consistency, and consistent sizing means fewer visible joint lines. It sits at the higher end of the material ladder; there are solid mid-tier options that hold up well too.
What Paver Driveways Cost in San Gabriel, CA

Paver driveway installation in San Gabriel runs $7,000 to $18,000 for a typical residential driveway. Here’s where the money goes on a line-item estimate.
| Line item | Typical range |
|---|---|
| Demo and haul-off of existing surface | $800 – $2,200 |
| Excavation and compacted base | $1,800 – $4,500 |
| Pavers and edge restraint | $3,500 – $9,000 |
| Cutting, compaction, joint sand | $600 – $1,600 |
| Permit and inspection fees (where required) | $150 – $600 |
Four things push a San Gabriel paver driveway job toward the high end. Size is the obvious one: a 20-by-20-foot driveway and a 12-by-30-foot driveway aren’t the same job even at the same square footage, because apron and curb cuts change the cutting labor. Existing condition matters more – concrete that’s intact but cracked removes faster than a base that’s been patched three times. Paver grade and pattern are the third lever. And site access is the fourth: a narrow shared driveway off a bungalow lot means the base material comes in by wheelbarrow instead of a skid steer, and that’s real hours.
A written estimate from us covers demo, base prep, pavers, edge restraint, final compaction, and haul-off – the number you see is the number you pay. What it typically doesn’t include: tree root removal beyond the driveway footprint, drainage repair if the downspouts discharge into the subgrade, and sealing, which is an optional add-on. If your driveway is part of a full Driveway & Pavers in San Gabriel, we bid both scopes in one document.
See the difference
Before
After
Before
After
Before
AfterWhat San Gabriel Homes Specifically Do to This Job
Most of the driveways we replace in San Gabriel sit in front of a 1920s to 1940s single-story Spanish Colonial Revival or California bungalow on a narrow lot. That housing stock changes this job in three ways you won’t hit in newer construction. First, the original apron at the sidewalk is often poured at a shallower grade than a modern driveway, so the new base has to be built up to meet it without flooding the garage on the rare winter storm that dumps an inch in an hour. Second, the Mission District’s design review culture means the planning division cares about what’s visible from the street – a paver driveway that reads as compatible with existing stucco and tile gets through review faster than one that clashes. If the driveway frontage sits in the historic resources inventory, expect the finish to be part of the conversation. Third, the Santa Ana wind events and hot dry summers dry out and crack the concrete aprons on lots in the 91775 and 91776 ZIP codes, which is the most common reason homeowners call us in the first place.
We cover the whole of San Gabriel, from the Mission District over toward the east-side postwar tract blocks, and into the surrounding pocket neighborhoods. Our Driveway & Pavers work is one of our core service lines, and homeowners often pair this with Door Installation in San Gabriel when they’re refreshing the front approach at the same time. If the project extends inside the house, they also add Cabinets & Countertops in San Gabriel to the same bid.
Serving San Gabriel, CA – Our Local Coverage Area
We serve San Gabriel and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Paver Driveways in San Gabriel

Most residential paver driveways take three to six working days from demo to final compaction, with base prep eating the largest share of that time. A straightforward 400-square-foot driveway with a clean subgrade usually lands near three days; a job with root removal, drainage work, or a tight shared access adds two or three more. Call (844) 797-7958 for an exact timeline on your driveway.
Yes, most paver driveway replacements in San Gabriel require a permit, especially where the work touches the sidewalk apron or curb cut. The specific permit scope depends on your lot, whether you’re changing the footprint, and whether the frontage sits in the Mission District design review area. We pull the permits and handle the inspection; call (844) 797-7958 and we’ll tell you exactly what your property needs.
No, we don’t recommend it, and we won’t bid it that way. A paver driveway relies on a compacted aggregate base to hold its grade over the decades; installing pavers over existing concrete skips that base and traps moisture. The one exception is a sound, flat concrete slab that’s being used as a demolition-and-replace reference, not as a live substrate. Call (844) 797-7958 and we’ll evaluate what’s there.
Paver driveway installation in San Gabriel runs $7,000 to $18,000 for a typical residential job, with the low end on smaller single-car driveways and standard 60mm pavers, and the high end on two-car driveways with 80mm pavers, significant base work, or design review requirements. The written estimate you get from us breaks down demo, base, pavers, and cutting line by line. Call (844) 797-7958 for an exact quote.
Every paver driveway we install is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That covers workmanship on base prep, compaction, and installation for two full years. Paver manufacturers carry their own material warranties on top of ours. Call (844) 797-7958 and we’ll walk through exactly what’s covered before you sign anything.
Get a Free Paver Driveway Estimate in San Gabriel
Call (844) 797-7958 to schedule a free on-site estimate for paver driveways in San Gabriel. We’ll walk the driveway, check the base, talk through paver options, and hand you a written line-item quote with no change orders. Calls are answered by a live person, 24/7, and $1,000 off applies to projects over $10,000. No pressure, no pitch.
Written by the team at Groundwork Construction Co.












