







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterPrivacy Fence in Burbank, CA
A privacy fence in Burbank typically runs $4,200 to $9,800 installed, depending on material, linear footage and how much site work your yard needs. Most single-family lots here need 80 to 150 feet of fencing, and we handle the whole job from permit check to final walkthrough. If you’re tired of your neighbor’s second-story window looking straight into your kitchen, or you just want the back patio to feel like yours again, we build fences that block the sightline and hold up in Burbank’s sun and Santa Ana wind.
Groundwork Construction Co. of Burbank installs privacy fencing as part of our full Fence Installation service, which means you get the same upfront pricing, verified crews and written guarantee on a simple side-yard fence that you’d get on a full remodel. Call (844) 797-7958 and a live person answers, day or night.
Burbank is a tight grid of older ranch homes, hillside properties and newer infill, and privacy here is rarely about a big open lot. It’s about the four feet between your dining room window and the neighbor’s AC unit in Magnolia Park, or the pool deck in Hillside that sits open to the street below. We build for those exact conditions.
Key Takeaways
- Privacy fences in Burbank usually cost $4,200 to $9,800, with wood on the lower end and composite or masonry-style on the higher end.
- Burbank’s height rules cap most residential rear and side fences at 6 feet, with some front-yard limits tighter; we confirm before we dig.
- Our technicians have up to 12 years of experience, arrive background-checked and in uniform, and every fence is covered by the 730-Day Done Right Promise.
- Free estimate and design consult, upfront pricing, and 0% financing for 18 months on approved projects.
When You Need a Privacy Fence
Most homeowners call us after living with the same annoyance for a year or two. Here are the situations we hear most in Burbank:
- Your neighbor added a second story or a deck. In the flat neighborhoods around Magnolia Park and Rancho Equestrian, a new addition next door can turn a private backyard into a fishbowl overnight. A 6-foot solid fence closes that sightline back down.
- You’re on a corner or a busy street. Homes along Glenoaks, Victory and the commercial edges of downtown Burbank get traffic, foot traffic and headlights. A solid privacy fence cuts the visual noise and gives the front or side yard a real boundary.
- Your pool or spa needs a barrier. California pool safety rules and Burbank’s own code require a barrier around pools, and a solid privacy fence does double duty: it satisfies the safety requirement and blocks the view from neighbors and the street.
- The old fence is leaning, rotted at the base, or held up with a 2×4. Burbank’s dry summers and occasional heavy winter rain wreck wood posts that weren’t set below the frost-free depth with proper drainage. We see a lot of failing fences in the older blocks near the airport and along the Chandler Bike Path.
- You want a dog contained without an eyesore. A 5- or 6-foot privacy fence keeps a dog in the yard and keeps the sight of the neighbor’s yard out, with no chain-link look.
- You’re adding an ADU or home addition and need a new property line. New construction often means re-drawing the lot line, and a fresh privacy fence marks the boundary cleanly. That’s where our Home Additions & ADU work in Burbank and fencing often come together.
Our Privacy Fence Process
Fencing looks simple until a post hits a gas line or a property line turns out to be three feet off. Here’s how we keep the job clean and predictable from the first call.
- Free on-site estimate and design consult. We walk the property line with you, measure the linear footage, check for utilities, and talk through material and height. You get a written number before any work starts. The number you see is the number you pay.
- Permit and code check. Burbank has its own fence height and setback rules, and they vary by zoning and by whether the fence is in the front, side or rear yard. We confirm what your lot allows so the fence doesn’t have to come down later.
- Materials and layout. For wood we use cedar or pressure-treated pine with galvanized hardware; for low-maintenance options we work with composite and vinyl lines, and we can match fencing details to James Hardie siding colors if your fence runs alongside the house. We stake the line and confirm gate placement with you before digging.
- Installation day. Posts are set in concrete below grade, panels are hung level and plumb, gates are hung to swing true, and we haul away old fencing and debris. Most standard residential privacy fences are completed in a single visit.
- Final walkthrough. We walk the fence with you, check every gate and latch, and hand over the written 730-Day Done Right Promise. If something isn’t right, we make it right.
Our technicians have up to 12 years of experience, they’re background-checked, and they show up in uniform. You’ll know who’s on your property.
Privacy Fence Pricing in Burbank
Privacy fencing is priced by the linear foot, plus the cost of gates, removal of the old fence, and any site work like grading, stump removal or working around a slope. Burbank lots with hillside grade or tight access between houses take more labor, and that’s the honest reason two quotes for the “same” fence can differ by a few thousand dollars.
Here’s a realistic range for the Burbank market:
| Fence type | Typical cost per linear foot (installed) | Notes |
|---|---|---|
| Pressure-treated pine privacy fence, 6 ft | $28 – $45 | Budget-friendly; expect to reseal and eventually replace panels |
| Cedar privacy fence, 6 ft | $38 – $60 | Holds up better to Burbank sun; natural rot resistance |
| Composite privacy fence | $55 – $85 | Low maintenance, longer lifespan, higher upfront cost |
| Vinyl privacy fence | $45 – $70 | No painting, easy to clean, limited color choices |
| Masonry or block privacy wall | $90 – $175 | Maximum privacy and sound blocking; structural footing required |
| Gate (walk-through) | $400 – $1,200 | Depends on width, hardware and whether it’s self-closing |
| Old fence removal and haul-away | $250 – $700 | Based on linear footage and disposal |
So a typical 100-foot cedar privacy fence in Burbank lands somewhere around $4,000 to $6,000 installed, and a composite or block project runs higher. A 150-foot lot with a slope and two gates can push past $10,000.
We do a free estimate and design consult, and we offer 0% financing for 18 months on approved projects, plus $1,000 off projects over $10,000. Upfront pricing means you know the full number before we break ground. Call (844) 797-7958 for your exact quote.
Do I Need a Permit for a Privacy Fence in Burbank?
Often yes. Burbank regulates fence height by yard location and zoning, and front-yard or corner-lot fences face tighter limits than a rear property line. Typical residential limits are around 6 feet for side and rear yards and lower for front yards, but the exact rule depends on your lot and zone. We check your specific address before building so the fence is compliant from day one. If you’re unsure, call (844) 797-7958 and we’ll walk you through it on the free estimate.
How Tall Can a Privacy Fence Be in Burbank?
In most Burbank residential zones, a solid privacy fence can go up to about 6 feet in the side and rear yard, and front-yard fences are capped lower. Hillside and corner lots sometimes carry different limits, and a fence on a slope is measured a specific way. We confirm the number for your parcel during the estimate rather than guessing, because an over-height fence can trigger a neighbor complaint and a rebuild. Call for a free site check.
Privacy Fence vs. a Chain-Link or Open Fence: What’s the Difference?
A privacy fence is a solid barrier that blocks the sightline into your yard, while a chain-link or open-rail fence marks a boundary without hiding anything. Privacy fencing uses tight-set boards, composite panels, bamboo or masonry to create a visual wall; it costs more per foot and needs more material but delivers actual privacy and some sound dampening. If your goal is only containing a pet or marking a line, a lower-cost open fence may be the right call, and we’ll tell you honestly when that’s the case.
Can You Match My Privacy Fence to My House or Existing Fence?
Yes. We match fence style and color to your home’s exterior and to nearby structures so the result looks planned, not patched in. That might mean staining cedar to complement James Hardie siding, choosing a composite panel color that echoes the trim, or coordinating a gate with a detached garage or shed built from a Tuff Shed kit. We bring samples to the estimate and show you how the material will age in Burbank’s climate before you commit.
Fencing That Fits the Rest of Your Home
Burbank homeowners usually come to us for a fence and end up talking about the whole property. If your fence runs alongside a house that’s due for exterior work, we can fold it into a single plan. We install windows and doors in Burbank when the old ones leak and rattle, and we build driveway and paver work in Burbank that ties the front yard together. If a fence is part of a bigger project like a kitchen remodel in Burbank or a bathroom renovation in Burbank, you still work with one contractor from foundation to finish line.
We also install roofing in Burbank and work with brand partners like James Hardie and Tuff Shed, so materials match across the property instead of clashing.
Neighboring communities we serve include fence installation in Glendale, fence installation in Pasadena and fence installation in North Hollywood. If you’re just outside Burbank, call and we’ll let you know if we cover your street.
Burbank yards have their own quirks. The dry heat and afternoon sun bake wood on the south and west run, and the Santa Ana winds put real load on a fence that wasn’t built with proper post depth. On the hillside streets above Olive, grade changes mean we step posts and panels to follow the slope instead of hanging a straight fence off a tilt. Down in the flats near the airport, shallow old footings from previous fences are common, and we pull and replace them rather than building on a rotten base. Those details are why a fence we build here holds up where a cheap one leans within a season.
FAQs – Privacy Fence
How much does a privacy fence cost in Burbank?
A privacy fence in Burbank typically costs $4,200 to $9,800 installed, depending on material and linear footage. A 100-foot cedar fence usually runs $4,000 to $6,000, while composite or masonry runs higher. Call (844) 797-7958 for an exact quote; estimates are free.
Can you install my privacy fence the same day?
Most standard residential privacy fences in Burbank are completed in a single visit once materials and permits are set. Larger lots, gates, slope work or masonry take longer. Call (844) 797-7958 and we’ll give you a realistic timeline up front.
What material is best for a privacy fence in Burbank?
Cedar is the best balance of cost and durability for most Burbank yards because it resists rot and handles sun well; composite and vinyl cost more but need less upkeep, and masonry gives the most privacy and sound blocking. We’ll recommend the right one for your lot on the free estimate. Call (844) 797-7958.
Will a privacy fence survive Burbank’s wind and heat?
A properly built privacy fence holds up to both when posts are set below grade in concrete and panels are fastened with galvanized hardware. The failures we see on older Burbank fences come from shallow footings and untreated wood, which we replace rather than repeat. Every fence we build is backed by the 730-Day Done Right Promise.
Can I get financing for a privacy fence?
Yes. We offer 0% financing for 18 months on approved projects, plus $1,000 off projects over $10,000. That makes a bigger fence or a whole-property project easier to budget. Call (844) 797-7958 to talk through the numbers; estimates are free.
If your Burbank yard needs a real boundary instead of the leaning fence that came with the house, we’ll measure it, price it honestly and build it to last. Our technicians have up to 12 years of experience, calls are answered by a live person 24/7, and every project is covered by the 730-Day Done Right Promise. Call (844) 797-7958 for a free estimate and design consult, or start with our Fence Installation in Burbank page to see the full scope.
Written by the team at Groundwork Construction Co. of Burbank, serving Burbank.


