







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Much Does Vinyl Fence Installation Cost in Burbank?
Vinyl fence installation in Burbank typically runs $3,500 to $9,000 for a standard residential yard, with most homeowners landing around $5,200 for roughly 120 to 150 linear feet of 6-foot privacy fencing, posts, and a gate. The exact number depends on linear footage, height, site access, and whether we’re tearing out an old fence first. That range covers the full install: materials, posts set in concrete, rails, pickets, caps, and cleanup.
We price vinyl fences in Burbank every week, and the honest answer is that the footage number does more to move your total than anything else. A small backyard along a hillside lot in the Verdugo Woodlands costs less than a long street-facing run in Magnolia Park where every post needs to clear mature tree roots. Below we break down where the money goes so you can plan a real budget, not a guess.
Key Takeaways
- Standard vinyl privacy fence in Burbank: $3,500 – $9,000 installed.
- Most of the cost is linear footage and height; tear-out and slope add the rest.
- Vinyl needs no painting, no staining, and no termite treatment, which is why it holds up well in Burbank’s dry, sunny climate.
- Every Groundwork vinyl fence is backed by our 730-Day Done Right Promise.
- Free estimates and 0% financing for 18 months are available; call (844) 797-7958 and a live person answers, day or night.

Vinyl Fence Installation Cost Breakdown (2026)
Here’s how a vinyl fence project in Burbank breaks down line by line. These are installed prices for our market, materials and labor included. The local pro we connect you with is licensed and insured as California requires, so the numbers below reflect a properly permitted, inspection-ready install rather than a cash-job shortcut.
| Line Item | Typical Burbank Range |
|---|---|
| Standard 6-ft vinyl privacy fence, installed (per linear foot) | $30 – $55 |
| Full residential yard, 120 – 150 linear ft, one gate | $3,500 – $6,500 |
| Larger lot, 200+ linear ft, two gates | $6,000 – $9,000 |
| Height upgrade (7 – 8 ft, where allowed) | +$8 – $15 per linear ft |
| Old fence removal and haul-away | $300 – $900 |
| Extra gate (walk-through) | $250 – $550 each |
| Double drive gate | $700 – $1,400 |
| Post set in concrete (per post, | $35 – $70 |
| Slope and grade work (hillside lots) | +$400 – $1,200 |
| Permit (when required by the City of Burbank) | $150 – $500 |
What pushes a quote toward the top of the range? Long runs, more gates, taller panels, and difficult ground. What keeps it near the bottom? A straightforward rectangle, good access for a wheelbarrow and materials, and no tear-out. Vinyl itself is priced by the linear foot because the panels, rails, and posts are manufactured to length, which makes the estimate more predictable than wood, where board count and grading can shift the number mid-project.
If your project runs past $10,000 because you’re fencing a large lot and adding a paver walkway or gate arbor at the same time, our home page lays out how we bundle scopes so you’re not paying two mobilization fees. Our Burbank service area page covers the neighborhoods we work in and what to expect on scheduling.
What Affects Vinyl Fence Installation Pricing in Burbank
Two homes on the same street can get quotes $2,000 apart, and it’s rarely because one contractor is gouging. These are the factors that actually move the number in Burbank.
- Linear footage and height. This is the biggest lever. A 6-foot privacy fence costs more per foot than a 4-foot picket fence, and going to 7 or 8 feet adds material and heavier posts. Burbank’s residential zoning caps fence height in front yards, so taller runs usually apply to side and rear property lines.
- Old fence removal. Tearing out a rotting wood fence, pulling concrete-set posts, and hauling it off runs $300 – $900. Wood fence posts that have been in the ground for 20 years in Burbank’s clay-heavy soil sometimes snap rather than pull, which means extra digging.
- Slope and grade. Burbank has real hillside. Lots that step up toward the Verdugos or sit on a grade in the Rancho area need racked panels or stepped sections, and that’s more labor than a flat run. Expect $400 – $1,200 on a sloped yard.
- Soil and roots. Much of Burbank sits on clay that holds water in winter and shrinks in summer. Posts need to go deep enough to stay put through both. Mature ficus, eucalyptus, and olive roots near the property line can mean hand-digging around roots instead of machine augering, which adds time.
- Gates. A single walk gate adds $250 – $550. A double drive gate with heavier posts and hardware runs $700 – $1,400. Every gate adds hardware, bracing, and adjustment time.
- Permits and property lines. Front-yard and corner-lot fences in Burbank may need a permit and a height check, and any fence near an easement or property line should be verified before the first post goes in. Skipping that step is how fence disputes start with neighbors.
One local note worth knowing: Burbank’s summer sun and dry Santa Ana winds are hard on wood, which is a big reason vinyl has become the default choice for homeowners here. Vinyl doesn’t rot, doesn’t need repainting every few years, and holds its color through the heat. That lower long-term maintenance is part of the value, even if the upfront number is a bit higher than a basic wood fence.

How to Save on Vinyl Fence Installation
You don’t have to accept the first number you’re handed. A few moves reliably bring a Burbank vinyl fence project down without cutting quality.
- Fence the whole run at once. Mobilizing a crew, setting up, and hauling materials is a fixed cost. Doing the full perimeter in one project spreads that cost and usually beats two separate jobs by several hundred dollars.
- Choose a standard panel height. Staying at 6 feet on side and rear lines keeps you in the most economical material tier and avoids the height-upgrade charge. Only go taller where you actually need the privacy and where the city allows it.
- Clear access before we arrive. Moving planters, patio furniture, and stored items off the fence line means the crew spends its hours installing, not shuffling. It’s a small thing that shows up on the invoice.
- Bundle related work. If you’re also replacing a gate, adding a paver path to the side yard, or repairing a section of fence installation elsewhere, folding it into one estimate saves a second trip. Our driveway and pavers work pairs naturally with a new fence line.
- Ask about financing. We offer 0% financing for 18 months, which lets you spread a larger fence project across a year and a half with no interest, and $1,000 off any project over $10,000. Those two together change the math on a bigger lot.
- Get a free estimate first. Guessing at footage is how budgets go sideways. Call (844) 797-7958 and we’ll measure your property line and give you an upfront number, no surprises.
Worth saying plainly: the cheapest bid is often the most expensive fence. A low number usually means shorter posts, thinner panels, or no permit. Vinyl is a 20-plus-year product, and quality hardware and proper post depth are what keep it standing through Burbank’s dry summers and the occasional hard rain.
What Vinyl Fence Styles and Options Cost
Not every vinyl fence is the same product, and the style you pick changes both the price and the look of your yard. Here’s how the common options compare for a Burbank property.
- Privacy fence (6 ft, solid panels). The most common choice, $30 – $55 per linear foot installed. Full visual block between you and the neighbor, which matters on tight Burbank lots where homes sit close together.
- Semi-privacy or lattice-top. Slightly less per foot than full privacy. Good for front-yard runs where you want some screening without a solid wall look.
- Picket or ornamental vinyl. Lower per-foot cost and a more open look, often used along the front property line where the city limits solid-fence height.
- Two-tone and textured finishes. A modest upgrade per foot. Popular on homes near the Chandler Park and Magnolia Park areas where curb appeal is part of the point.
- Racking vs. stepped panels. On a slope, racked panels follow the grade smoothly and add labor. Stepped panels stay level in sections and cost a bit less to install but need more posts.
If you want the durability of a fence tied to a broader exterior upgrade, the brand partners we work with cover fencing, hardscaping, and exterior trim so the whole property reads as one finished design. Pair a new fence with a roof replacement or window replacement and the whole exterior comes together on one schedule.
Can You Install a Vinyl Fence the Same Day?
Yes, most standard residential vinyl fence runs in Burbank are completed in a single day, provided materials are on hand and the ground is straightforward. A 120-to-150-foot privacy fence with one or two gates is a one-day job for an experienced crew. Tear-out, slope work, or root-heavy lines can push it to two days. We schedule around your property and leave the site clean, with old materials hauled away.
Why Choose Groundwork Construction Co. for Your Burbank Vinyl Fence?
We’ve been installing fences and full exterior projects in Burbank since 2014, and every vinyl fence we build is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction, and it’s in writing. Our technicians have up to 12 years of experience, and they’re background-checked and arrive in uniform, ready to work, not to survey the job and disappear.
Calls are answered by a live person 24 hours a day, 7 days a week, so you’re never stuck in a voicemail black hole waiting until Monday. Our pricing is upfront and the number you see is the number you pay. And when the weather shifts or an inspector needs a callback, you reach a real human who knows your project.
Because we handle the full scope of home construction, a fence often becomes the starting point for bigger work. Homeowners who start with a fence line frequently come back to us for a kitchen remodel, a bathroom remodel, a home addition or ADU, or a new concrete driveway. One contractor, one standard, from foundation to finish line.
FAQs – Vinyl Fence Installation Cost in Burbank
What’s the average cost of a vinyl fence in Burbank?
The average installed cost is $3,500 to $9,000, with most homeowners landing near $5,200 for a 120-to-150-foot privacy fence with a gate. Very small runs can come in under $3,500, and large lots with multiple gates and slope work push toward the top. Call (844) 797-7958 for an exact quote; estimates are free.
Is a vinyl fence cheaper than wood?
On upfront cost, a basic vinyl fence runs slightly higher than a builder-grade wood fence, but it’s cheaper over its life because there’s no repainting, staining, or termite treatment, and it doesn’t rot in Burbank’s dry climate. Most vinyl fences are quoted at $30 – $55 per linear foot installed. Call (844) 797-7958 to compare your options side by side at no charge.
How long does a vinyl fence last in Burbank’s climate?
A quality vinyl privacy fence typically lasts 20 to 30 years in Burbank’s sun and dry heat, well beyond what an untreated wood fence manages. Wind and UV exposure are the two things that wear a fence here, and premium vinyl is built to handle both without fading or cracking. Call (844) 797-7958 to talk through material options.
Do I need a permit to install a vinyl fence in Burbank?
Some fences do, and front-yard and corner-lot installations may require a permit and a height review, typically $150 – $500 where one is needed. Rear and side property-line fences at standard height often don’t, but it’s worth confirming before the first post goes in. We help you sort out permit needs as part of your free estimate; call (844) 797-7958.
How much does it cost to remove an old fence first?
Removing and hauling away an old wood fence runs $300 to $900 in Burbank, depending on length and whether posts are set in concrete. It’s worth doing, because old posts left behind get in the way of a clean new line and can cause the new fence to lean. Call (844) 797-7958 for a bundled tear-out-and-install price.
Is it cheaper to repair or replace a vinyl fence?
Repair is usually cheaper for a single damaged panel, gate, or post: a section fix might run $150 – $400, while a full replacement runs into the thousands. But if the fence is old, sagging, or repeatedly failing, replacement saves money over a few years of repeat repairs. Call (844) 797-7958 and we’ll tell you honestly which makes sense.
What financing is available for a vinyl fence project?
We offer 0% financing for 18 months, plus $1,000 off any project over $10,000 and a free project estimate and design consult. That makes a larger fence, or a fence bundled with hardscaping, easier to fit into a budget. Call (844) 797-7958 to see what your project qualifies for.
Get Your Free Vinyl Fence Estimate in Burbank
Ready for a real number instead of a guess? Call (844) 797-7958 and a live person will set up a free estimate. We’ll measure your property line, walk the site with you, and hand you an upfront price with no surprises and nothing hidden. Every vinyl fence is covered by our 730-Day Done Right Promise, installed by background-checked, uniformed technicians, and backed in writing. From foundation to finish line, Groundwork Construction Co. of Burbank is here to build it once and build it right.
Pricing reflects the Burbank market as of 2026. Groundwork Construction Co. of Burbank offers free estimates – call (844) 797-7958.
What Our Customers Say
"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."
- Angela Wong"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."
- Laura Bennett"Quality work and honest pricing. He is stretched across a few jobs at once so he is not always on site, though the carpenter who was there knew everything."
- Whitney Norris












