







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWalk-In Shower Installation in Burbank, CA
A walk-in shower installation in Burbank typically runs $6,500 to $16,000 for a full tear-out and rebuild, and most jobs wrap in 5 to 10 working days once materials are on site. The work itself matters more than the showroom photos: the pan has to be sloped right, the valve set at the correct depth, and the waterproofing done so it holds up through a decade of daily showers. Get any of those wrong and you’ll be tearing out tile in three years.
Groundwork Construction Co. of Burbank installs walk-in showers as part of our Bathroom Remodeling service, which means the plumbing, framing, waterproofing, tile, and glass all come from one accountable crew instead of three subcontractors pointing at each other when something leaks. You get upfront pricing before the first box is opened, background-checked technicians in uniform, and a 730-Day Done Right Promise that covers the workmanship long after the grout has cured. Call (844) 797-7958 and a live person picks up, day or night.
Most of our Burbank walk-in shower work is in the older housing stock: the 1920s bungalows near Magnolia Park, the 1950s tract homes out toward the Rancho district, the mid-century places up in the hills. Those houses were built for tubs, not curbless showers, and they come with their own set of surprises once you open a wall. We plan for that.
Key Takeaways
- Walk-in shower installation in Burbank runs roughly $6,500 to $16,000, depending on size, tile, glass, and whether you need plumbing moved.
- Most jobs take 5 to 10 working days on site; permits from the City of Burbank add lead time before we start.
- Waterproofing and pan slope are what separate a shower that lasts from one that leaks into the ceiling below.
- Every installation is backed by the 730-Day Done Right Promise and comes with a free project estimate and design consult.
- Call (844) 797-7958 for a no-hassle upfront quote.

When You Need Walk-In Shower Installation
Walk-in showers make sense for a lot of reasons beyond looks. Here’s what we hear from Burbank homeowners when they call us:
- Someone in the house can’t safely step over a tub wall anymore. A low curb or curbless entry is one of the most practical accessibility upgrades you can make, and it doesn’t have to look institutional. We build them to match the rest of the bathroom.
- The tub surround is failing. In Burbank homes from the 1950s and 60s, we regularly find original tile set in a mud bed that has cracked and let water behind it. Once that framing gets wet, it’s not a regrout job. It’s a rebuild.
- The tub takes up half the room. A standard tub is 60 inches long and 30 wide. Pulling it and building a walk-in reclaims floor space in a way that makes a small Burbank bathroom feel twice as big.
- You’re remodeling the whole bathroom anyway. If the vanity, floor, and lighting are already coming out, this is the moment to get the shower right. Doing it later means tearing out a finished room.
- You want a shower you can actually clean. Large-format tile, a linear drain, and a properly sloped pan cut down on the mold-prone corners that plague small stand-up showers.
- Your current shower stalls in the summer heat. Hillside homes around Brace Canyon and Stough Canyon get hot, and a poorly vented, undersized shower can stay damp and steamy. A well-planned walk-in with proper ventilation solves it.
If your situation sounds like one of these, it’s worth a free estimate before you commit to anything. Call (844) 797-7958 and we’ll talk through what your bathroom can realistically hold.
Our Walk-In Shower Installation Process
Here’s how a walk-in shower goes from first call to final walkthrough with us. We don’t skip steps, and we don’t hand off your job to a rotating cast of subs.
- Free estimate and design consult. We measure the space, look at what’s behind the current shower or tub, and talk through layout, tile, and glass options. You get an upfront price in writing before anything starts. No-hassle upfront pricing means the number you see is the number you pay.
- Permits and planning. Most shower replacement work in Burbank requires a permit from the City of Burbank’s building department, especially when plumbing is relocated or a wall is removed. We handle the paperwork and schedule the inspections. This is where the lead time lives, not the build.
- Demo and inspection. We pull the old tub or shower, open the walls, and check the framing and plumbing. In older Burbank homes this is where we sometimes find dry rot or a valve that was never set right. We show you what we found and price any change before we proceed.
- Rough plumbing and framing. We reposition the drain, set the new valve, and reframe as needed so the shower sits level and square. Curbless designs get careful attention here, since the floor slope has to work with the framing.
- Waterproofing and pan. This is the step that decides whether the shower lasts. We build a properly sloped pan, install a waterproof membrane over it, and band the seams and corners where most leaks start. Inspections happen before tile goes down.
- Tile, glass, and finish. We set the tile, install the shower valve trim and fixtures, hang the glass, and seal everything. Then we walk the job with you, run the water, and make sure you’re satisfied before we call it done.
The finish work uses brands we trust and have used across thousands of jobs. KraftMaid and Wellborn vanities and built-in storage are common in these bathrooms, and James Hardie backs up the exterior, so the bathroom addition or remodel we’re doing alongside the shower holds up to Burbank’s dry heat and occasional rains.

Walk-In Shower Installation Pricing in Burbank
A walk-in shower in Burbank usually costs between $6,500 and $16,000 for a full installation, and the exact number depends on size, layout, tile, glass, and whether plumbing has to move. A simple replacement in the same footprint sits near the low end; a curbless custom shower with a linear drain, frameless glass, and premium tile lands near the top. Below is what drives the price:
| Line item | Typical range | What drives the number |
|---|---|---|
| Demo and tear-out | $500 – $1,200 | Cabinet and tub removal, tile and mud-bed demolition, haul-away |
| Plumbing rough-in | $800 – $2,500 | Moving the drain or valve, replacing old galvanized or copper, adding a bench |
| Waterproofing and pan | $700 – $1,800 | Sloped pan, membrane, corner banding, drain type (linear drains cost more) |
| Tile and setting | $1,500 – $5,000 | Tile choice, size, and pattern; large-format and custom layouts add labor |
| Glass and fixtures | $1,200 – $3,500 | Frameless vs. framed glass, shower valve and trim, niche and bench |
| Permit and inspection | $300 – $800 | City of Burbank permit fees and required inspections |
Three things push the number up or down in Burbank specifically. Older homes sometimes need the drain line rerouted because the original tub drain sits where the new shower drain can’t go. Hillside homes sometimes have limited access, which affects how much material gets carried. And curbless designs need a little more framing and tile work than a standard curb. We tell you which of these apply before you sign anything.
To make a larger bathroom update easier to budget, we offer 0% financing for 18 months and $1,000 off projects over $10,000. That $10,000 threshold is easy to reach when a full bathroom remodel is in play, so if you’re also replacing the vanity or floor, it’s worth a single conversation. Call (844) 797-7958 for a free estimate with the numbers written down.
FAQs – Walk-In Shower Installation
How much does walk-in shower installation cost in Burbank?
Walk-in shower installation in Burbank typically costs $6,500 to $16,000, depending on size, tile, glass, and whether plumbing needs to move. A replacement in the same footprint with standard tile lands near the low end; a custom curbless shower with a linear drain and frameless glass goes higher. Call (844) 797-7958 for an exact quote; estimates are free.
Can you install a walk-in shower in a day?
No, a genuine walk-in shower install is not a one-day job. Most take 5 to 10 working days once materials arrive, and permits add lead time before that. The reason is simple: demo, plumbing, waterproofing, and tile all need to cure and be inspected, and rushing any step is how showers leak. We’ll give you a real timeline up front, not a promise that gets quietly revised. Call (844) 797-7958 to get that timeline for your bathroom.
Do I need a permit for a walk-in shower in Burbank?
In most cases, yes. The City of Burbank requires a permit when you’re replacing a tub with a shower, moving plumbing, or deleting a wall. We pull the permit and schedule inspections as part of the job. Doing it without a permit can complicate resale and leave you exposed if a leak shows up later. Call (844) 797-7958 if you’re unsure what your project needs.
Is it cheaper to repair my existing shower or replace it with a walk-in?
Repairing is usually cheaper in the short term if the damage is cosmetic and the pan and waterproofing are sound. Once water has gotten behind the tile or the pan has cracked, replacement often costs less over the next decade because you’re not opening the same wall twice. We’ll tell you which situation you’re in after we open the wall. Call (844) 797-7958 for a free assessment.
How long does a walk-in shower last?
A properly built walk-in shower should last 15 to 25 years before the tile and grout need attention, and the waterproofing underneath typically outlasts the visible surface. The variables are the pan slope, the waterproofing system, and whether the shower is ventilated. We build ours to tie into the 730-Day Done Right Promise, and the underlying materials hold up for decades.
Walk-in shower installation is the kind of work where the details behind the tile decide how the job ends. If you’re in Burbank and you want a straight answer on cost, timeline, and what your bathroom can actually hold, call (844) 797-7958 for a free estimate. A live person will pick up, day or night, and we’ll get you scheduled. You can also explore our full Bathroom Remodeling in Burbank service to see how a shower fits into a larger update, or start from the home page to see everything we do. From foundation to finish line, built to last and backed in writing.
Written by the team at Groundwork Construction Co. of Burbank, serving Burbank.


