







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterVanities, Tile & Fixtures in Burbank, CA
Vanities, tile, and fixtures are the three elements Burbank homeowners see and touch every single day in a bathroom, which is why getting them right matters more than almost any other part of a remodel. A floating white oak vanity, a properly waterproofed shower pan behind large-format porcelain, and a Kohler faucet that shuts off clean after a thousand uses – that combination is what separates a bathroom that feels finished from one that feels assembled. We install all three, and we do it under one roof with the same crew accountable from demo to final caulk line. Call (844) 797-7958 and a live person picks up, day or night.
This work usually runs alongside a full Bathroom Remodeling project, but plenty of Burbank clients hire us for the vanity-tile-fixtures scope alone – a primary bath refresh in a 1950s ranch off Verdugo Avenue, a hall bath in a Magnolia Park bungalow where the original tile is cracking at the grout lines, or a 1990s townhome near the Empire Center that still has the builder-grade oak cabinet and chrome shower trim. We handle each as its own project, with upfront pricing and a written 730-Day Done Right Promise behind the installation.

Key Takeaways
- Vanities, tile, and fixtures are the visible finish layer of any bathroom – and the layer most likely to fail early if waterproofing or substrate prep is rushed.
- Typical Burbank pricing runs $3,800-$6,500 for a vanity replacement, $2,500-$9,000+ for tile work depending on scope, and $400-$1,800 for a full fixture package.
- Everything we install is covered by the 730-Day Done Right Promise, and we back it with up to 12 years of technician experience.
- You’ll get no-hassle upfront pricing, 0% financing for 18 months, $1,000 off projects over $10,000, and a free project estimate and design consult.
When You Need Vanities, Tile & Fixtures
Burbank is a city of older housing stock – a huge share of homes here were built between 1920 and 1965, and a lot of them still carry their original bathroom surfaces. That means we see the same handful of problems on repeat.
- Cracked or hollow-sounding floor tile. In Burbank’s older homes, the tile is often set on a mud bed that has shifted with the region’s minor seismic activity. If a tile sounds hollow when you tap it, the thinset has likely debonded and the whole field may need to come up, not just the one cracked piece.
- Grout that won’t stay clean. When grout lines turn dark within weeks of cleaning, it’s usually not dirt – it’s a failed seal or moisture wicking up from below. In homes near the Los Angeles River corridor, we see this tied to slab moisture more than anything else.
- A vanity that’s sagging, swollen, or just past its era. Particleboard cabinets from the 1980s and 1990s swell at the toe kick and around the sink cutout. Once the substrate is water-damaged, replacing the vanity is more reliable than resurfacing it.
- Faucets and shower valves that drip or won’t hold temperature. A cartridge replacement fixes a drip most of the time, but a valve that won’t hold temperature usually needs replacing, and that’s a wall-open job that pairs naturally with tile work.
- A shower that leaks into the wall. Tile and grout are not waterproofing. When a shower has leaked for years, the fix is a full tear-out to the studs with a proper waterproof membrane – not a patch over the existing surface.
- You’re getting the house ready to sell or to rent. Burbank has a steady rental market and plenty of homeowners prepping for a sale. A new vanity, updated tile, and matching fixtures are the fastest way to lift a bathroom’s perceived value without a full gut.
A note on the shower itself: a leaking shower pan, a failed waterproofing membrane, or a cracked shower valve are genuinely risky to touch. We don’t publish step-by-step instructions for re-sealing a pan or opening a valve wall, and we’d recommend you don’t attempt it – the failure mode is hidden rot, mold, and water damage that costs far more than the original repair. This is trained-professional territory, and it’s the work we do every week.

Our Vanities, Tile & Fixtures Process
- Free estimate and design consult. We come out, measure the room, look at what’s behind the existing surfaces, and talk through layout, material, and budget. You’ll leave with a written number – the number you see is the number you pay. No surprises mid-project.
- Material selection. We walk you through vanity lines like KraftMaid and Wellborn cabinetry, tile options from porcelain to natural stone, and fixtures from the standard-name brands we trust. You pick the look; we handle the specs, the substrate requirements, and the waterproofing details that go behind it.
- Demo and prep. We pull the vanity, tear out tile to the substrate, and inspect what’s underneath – rot, old plumbing, or a subfloor that needs attention. If we find something the bid didn’t cover, you hear about it before we keep going, not after.
- Waterproofing and rough-in. This is where the job is won or lost. Shower pans get a proper sloped bed and membrane; valve rough-in gets set at the correct depth for the finished tile thickness; the vanity stub-outs and drain get moved to align with the new cabinet. None of it is visible later, and all of it is covered by our 730-Day Done Right Promise.
- Tile, vanity, and fixture install. Tile set, grouted, and sealed. Vanity set and leveled, top installed, sink and faucet dropped in. Trim, showerhead, tub spout, and accessories installed and tested. Most of this work is completed in a single visit when the scope allows.
- Final walkthrough. We run every fixture, check every drain for flow, confirm the shower door or curtain line, and clean up. You get a written record of what was installed and the warranty behind it. If a grout line cracks or a faucet drips within the promise window, we come back and make it right.
Vanities, Tile & Fixtures Pricing in Burbank
Here’s what this scope actually costs in the Burbank market. Prices move with material selection, room size, and how much prep the existing bathroom needs, so treat these as honest ranges rather than a quote.
| Line Item | Typical Burbank Range |
|---|---|
| Vanity replacement (stock to semi-custom, incl. top and sink) | $3,800 – $6,500 |
| Vanity replacement (custom, plumbing relocated) | $6,500 – $11,000+ |
| Floor tile, per square foot installed | $12 – $28/sq ft |
| Shower wall tile, per square foot installed | $18 – $45/sq ft |
| Shower pan and waterproofing (labor only) | $1,200 – $2,400 |
| Fixture package (faucets, shower trim, valve) | $400 – $1,800 |
| Full primary bath tile + vanity + fixtures | $9,500 – $22,000+ |
What drives the number:
- Material tier. Builder-grade porcelain and a stock vanity sit at the low end. Large-format porcelain, natural stone – especially marble, which has become popular in Burbank’s hillside homes – and a semi-custom cabinet sit higher. Stone tile adds material cost and installation time.
- Substrate condition. A 1940s bungalow with a mud-set floor and a cast-iron drain needs more demo and more prep than a 2005 townhome. We price the prep honestly up front so there’s no change order surprise later.
- Layout changes. Relocating the vanity sink, moving the shower valve, or swapping a tub for a walk-in shower touches plumbing, and that’s more than a surface-level swap.
- Waterproofing system. A proper shower membrane is an investment in the 730-Day Done Right Promise. We don’t cut this corner – ever.
Two standing offers make the number more manageable: 0% financing for 18 months, and $1,000 off projects over $10,000. The free project estimate and design consult is exactly that – free, with a written number and no pressure. For a broader look at full-bath scope and cost, our Bathroom Remodeling in Burbank page lays out the whole picture.
FAQs – Vanities, Tile & Fixtures
How much does a new bathroom vanity cost in Burbank?
A new vanity installed in Burbank typically runs $3,800-$6,500 for a stock or semi-custom cabinet with a top and sink, and $6,500-$11,000+ for a custom build or one that moves the plumbing. The number depends on cabinet line, top material, sink style, and whether the existing stub-outs line up with the new cabinet. KraftMaid and Wellborn are two of the lines we install most. Call (844) 797-7958 for an exact quote – estimates are free.
Is it cheaper to repair or replace bathroom tile?
Replacing tile is usually cheaper than repairing it when more than a tile or two is failing, and here’s why: a repair that doesn’t fix the underlying cause – a failed mud bed, a leaking shower pan, a subfloor that needs work – just moves the problem around. The honest rule is that if grout lines are cracking in more than two places, the substrate is suspect and a replacement is the better long-term value. If your shower is leaking into the wall, don’t put a patch over it – call us and we’ll diagnose it properly.
Can you replace bathroom fixtures without redoing the tile?
Yes. Faucets, showerheads, tub spouts, drains, and most fixtures can be replaced without touching the tile, and we do it routinely. The exception is the shower valve – swapping a valve means opening the wall behind the tile, so it usually pairs with tile work or a scheduled repair. We’ll tell you before we start which category your fixture falls into. Call us and we’ll walk through it.
Can you come today?
Same-day availability depends on the schedule, but we answer the phone 24/7 with a real person on the other end, so you’ll know within minutes rather than waiting for a callback. For a leaking shower or a fixture failure you’re worried about, call (844) 797-7958 and we’ll get you on the schedule or into a same-day slot if one’s open.
Why Groundwork Construction Co. of Burbank for Vanities, Tile & Fixtures
We’re a full-scope construction partner, which means the same accountability that governs our home additions and roof work governs a vanity installation. Background-checked, uniformed technicians show up on every job – not an unmarked van crew. Live people answer our phone 24/7, so you’re never dropped into a voicemail. And every installation is backed by the 730-Day Done Right Promise: if it’s not done right, we make it right, for two full years.
Our technicians have up to 12 years of experience with tile, cabinet, and fixture work. We’ve installed vanities, tile, and fixtures across Burbank’s neighborhoods – in the bungalows of Magnolia Park, the mid-century ranches north of Alameda, the hillside homes up by Sunset Canyon, and the newer builds near the Empire Center – so we know what the housing stock actually looks like under the surface. That local knowledge shows up in how we bid and where we slow down during install.
If you’re planning a broader renovation that includes this work, our Burbank bathroom remodeling page covers full-scope bath projects from demo through final walkthrough – and if you’re also freshening up adjacent spaces while we’re on site, our team handles kitchen remodeling in Burbank, roofing in Burbank, and window and door replacement in Burbank as well.
Looking for a contractor in a nearby city? Our teams also work in Glendale, Pasadena, and North Hollywood, plus the surrounding communities.
Common Questions We Get About Materials and Finish
Homeowners in Burbank ask us the same handful of material questions before every vanity and tile job, so here are the answers in one place.
Porcelain or natural stone? Porcelain is more durable, easier to keep clean, and cheaper per square foot. Stone – marble, travertine, slate – has the look many homeowners want in a primary bath, but it needs resealing and shows etching faster. For a high-traffic hall bath, porcelain wins. For a primary bath in a Burbank hillside home where the aesthetic is the point, stone is worth the maintenance.
Floating or freestanding vanity? A floating vanity opens up floor space and shows off tile underneath, but it requires proper blocking in the wall. A freestanding vanity is easier to install and easier to replace down the road. In a small Burbank bath – and many of our older homes have tight bathrooms – floating usually makes the room feel bigger.
Frameless or framed shower door? Frameless glass shows the tile and makes the shower feel like part of the room. Framed doors cost less and are more forgiving of imperfections in the wall. We install both and will steer you based on how square your existing opening is.
What about fixtures? Faucets, shower trim, and valve cartridges are where quality shows up over five and ten years. We install fixtures from the brands we trust, and we don’t put a builder-grade cartridge behind a stone-tile shower that cost four figures to install. The fixture package is where the money spent on the hidden parts of a bathroom quietly pays you back.
What Homeowners in Burbank Tell Us
Most of our vanity, tile, and fixture calls in Burbank come from two directions. Some homeowners are finishing a bathroom that was started by someone else – a contractor who demoed the room and then vanished, a tile job with no waterproofing behind it, a vanity that was set with no shutoffs. Others are doing the work themselves but want a pro to handle the parts that matter: waterproofing the shower, setting the tile, hanging the vanity, and installing fixtures so they don’t drip.
Either way, the job gets the same treatment. Upfront pricing before we start. Background-checked, uniformed technicians on site. A 730-Day Done Right Promise on the finished work. And if something’s not right, we come back and fix it – no fine print, no “we’ll see what we can do.” That’s the standard on a full bathroom remodel, and it’s the standard on a single-vanity replacement.
Schedule Your Free Estimate
If you’re ready to install a new vanity, lay new tile, or replace fixtures that have run their course, call Groundwork Construction Co. of Burbank at (844) 797-7958 for a free project estimate and design consult. We’ll visit, measure, talk through options, and give you a written number – no-hassle upfront pricing, no surprises, and 0% financing for 18 months with $1,000 off projects over $10,000. Live person, 24/7. We’ll see you on the job.
Written by the team at Groundwork Construction Co. of Burbank, serving Burbank.


