







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterBarrel Tile Roofing in Burbank, CA
Barrel tile roofing in Burbank is a clay or concrete roof system where half-round tiles interlock in overlapping rows to shed water and deflect intense sun. Homeowners here choose it for the same reasons their neighbors have for a century: it handles San Fernando Valley heat, it lasts for decades, and it holds its color when asphalt shingles are curling in the sun. A properly installed barrel tile roof is a 40-to-50-year investment on most Burbank homes, and the install quality matters more than the tile itself.
We install and replace barrel tile roofs across Burbank, from the older Spanish Colonial homes near Magnolia Park to the hillside properties up above Glenoaks where wind load is higher than it looks from the street. If you’re researching whether your existing tile just needs repair or a full replacement, call us at (844) 797-7958 and we’ll tell you straight. Our technicians have up to 12 years of experience working with clay and concrete tile systems, and every project is covered by our 730-Day Done Right Promise. For the full scope of what we do across this trade, see our Roofing page.
Burbank is a specific place to put a tile roof on. Summer highs sit consistently in the mid-to-high 90s, with stretches above 100°F in July and August. Roofs on south- and west-facing slopes take direct afternoon sun for hours. Add the Santa Ana wind events that funnel through the valley in fall and winter, and the tile system gets tested from two directions: thermal expansion in summer, uplift pressure in fall. A barrel tile roof installed with proper battens, correct fasteners and a solid underlayment handles both. One installed with the wrong nail or a skimped batten system starts cracking and slipping within a few years. That difference is the whole job.
We bring the same standard here that we do across every project we run, including non-roofing work like kitchens with KraftMaid cabinetry or siding jobs using James Hardie. A roof is the largest single system on your house, and it gets the same upfront pricing and near two-year workmanship guarantee as everything else. Learn more about which neighborhoods we cover on our Burbank service area page.

When You Need Barrel Tile Roofing
Barrel tile problems don’t always announce themselves. Tile hides the waterproofing layer beneath it, so the first sign of trouble is often a leak that shows up on a ceiling far from where the actual damage is. Here’s what tells you it’s time to get an evaluation, and these signs are pulled from what we actually see in Burbank homes.
- Cracked or slipped tiles after a wind event. The Santa Ana winds that rip through the valley in October and November loosen tile fasteners and shift whole courses. If you’ve walked out after a windy night and seen tile sitting sideways or in the yard, the underlayment beneath is now exposed to rain. That’s a repair, and it’s an urgent one.
- Ceiling stains or attic moisture after rain. Brown rings on the ceiling or dampness in the attic almost always mean the underlayment has failed, not the tile itself. Original tar paper under a 30-year-old tile roof in Burbank is well past its service life even when the tile on top still looks fine.
- Rusted or exposed fasteners and battens. When you can see rusted nails or degraded batten strips from the ground or in the attic, the roof’s attachment system is compromised. It’s a structural concern the moment a real wind event arrives.
- Sagging roofline or visible deck damage. If the roof deck sags between the rafters or the fascia is soft, moisture has been getting in for a while. A barrel tile inspection will tell you whether you’re looking at a tile-and-underlayment job or something that touches the deck framing.
- Moss, algae and dark staining concentrated on the north slope. The shaded northern exposure holds moisture longer, and heavy growth means the tile surface is staying wet and the underlayment is degrading underneath. It’s cosmetic until it isn’t.
- You’re buying a home with an aging tile roof. If the inspection report flags a tile roof past the 30-year mark on the underlayment, get a replacement quote before you close. On Burbank bungalows and Spanish Colonials, this comes up constantly because so many have never had a full tear-off.
If any of these sound familiar, don’t wait for the next rainy season. Call (844) 797-7958 and we’ll get an inspection scheduled.
Our Barrel Tile Roofing Process
Replacing a barrel tile roof is a sequence, and every step matters because the waterproofing lives under the tile, not on it. When we do a barrel tile install or replacement, here’s exactly how it goes from the first walkthrough to the final cleanup.
- Inspection and honest assessment. We get on the roof, check the deck, look at the underlayment condition, count cracked tile and map what’s salvageable. If your existing tile can be removed, saved and reused over new underlayment, we’ll tell you. If it can’t, you’ll hear that too. We don’t sell a full replacement when a repair plus new underlayment does the job.
- Upfront written pricing. You get a line-item estimate before any work starts, with the tile material, underlayment, battens, fasteners and labor all spelled out. The number you see is the number you pay. No-hassle upfront pricing, no surprises, and you’ll know your financing options, including 0% financing for 18 months on qualified projects.
- Tear-off and deck inspection. We remove the old tile and underlayment, then inspect the roof deck for rot, soft spots and failed sheathing. Burbank homes from the 1940s and 1950s often have deck repairs that need to happen before new roofing goes on. We photograph anything we find and show you before we fix it.
- Underlayment, battens and flashing. This is the layer that actually keeps water out. We install a high-temp underlayment rated for tile roof surface temperatures, then the batten system that supports the barrel tile in even, load-distributed rows. Flashing at the valleys, chimneys, vents and wall intersections is detailed to direct water away. This stage is where a cheap tile job fails and a good one lasts.
- Tile installation and ridge detailing. Barrel tiles go down in disciplined, aligned courses, fastened the way the manufacturer and code require for the wind zone. Ridge and hip tiles are set with proper bedding and closures, and color and finish are checked course by course.
- Final walkthrough and cleanup. We do a magnet sweep for nails, haul away every bit of debris, and walk the finished roof and your property with you. Then it’s backed in writing by our 730-Day Done Right Promise: if it’s not done right, we make it right.
The tile work is the visible part, but everything that keeps your Burbank home dry happened in step four. That’s why we don’t cut corners under the tile, and it’s why a barrel tile roof we install holds up through years of valley heat and wind. To see how this fits with our other exterior work, take a look at our home page.

Barrel Tile Roofing Pricing in Burbank
Barrel tile roof replacement in Burbank typically runs $18,000 to $45,000 for a typical single-family home, with most jobs landing between $22,000 and $35,000 depending on roof size, pitch, tile material and the condition of the deck underneath. Repair work for a damaged section starts much lower, usually $600 to $2,800 for a focused repair. These ranges reflect real Burbank-area pricing, not national averages, because labor and material costs in the San Fernando Valley differ from other parts of the country.
Here’s a transparent breakdown by line item so you know what goes into the number.
| Line Item | Typical Range (Burbank) |
|---|---|
| Barrel tile repair (cracked/slipped tile, flashing) | $600 – $2,800 |
| Underlayment replacement (tile saved and reinstalled) | $9,000 – $16,000 |
| Full tear-off and replacement, asphalt shingle standard | $12,000 – $22,000 |
| Full barrel tile replacement, standard roof | $22,000 – $35,000 |
| Full barrel tile replacement, complex/steeper roof | $35,000 – $45,000+ |
| Deck repair (per sheet of sheathing) | Varies, quoted upfront |
What drives the number up or down:
- Roof size and pitch. A steep hillside roof above Glenoaks takes more labor and safety setup than a low-slope bungalow near Magnolia Park. Pitch adds labor, and it should.
- Tile material. Clay barrel tile runs higher than concrete barrel tile. Both perform well in Burbank’s climate; the choice usually comes down to the look and the budget you’ve set. We carry quality tile from trusted manufacturers so you’re choosing quality, not just what’s sitting in a warehouse.
- Deck condition. If the sheathing under the old roof is sound, you save. If it’s rotted, it has to be replaced, and a good contractor finds that at tear-off, not a year later.
- Complexity. Valleys, dormers, chimneys and multiple roof planes add flashing work and labor.
- Whether tile is reusable. If your existing tile can come off and go back on over new underlayment, you avoid the cost of new tile and that changes the whole estimate.
On larger jobs, we can put $1,000 off projects over $10,000 toward your barrel tile replacement, and 0% financing for 18 months helps spread the cost. Your estimate is free and comes with a design consultation, so you have a real number in hand before you commit. Call (844) 797-7958 to book it.
FAQs – Barrel Tile Roofing
How much does barrel tile roofing cost in Burbank?
Barrel tile roof replacement in Burbank typically costs $22,000 to $35,000 for a standard single-family home, or $35,000 to $45,000+ for larger or steeper roofs. Focused repairs run $600 to $2,800, and underlayment replacement with tile saved and reinstalled runs $9,000 to $16,000. The biggest cost drivers are roof size, pitch, whether you choose clay or concrete tile, and whether the deck underneath needs repair. Call (844) 797-7958 for an exact quote, estimates are free.
Is it cheaper to repair or replace a barrel tile roof in Burbank?
Repair is cheaper when the damage is isolated to a few cracked or slipped tiles and the underlayment is still sound; a repair in that case runs $600 to $2,800. Replacement makes more sense when the underlayment is failing across the roof, when multiple courses are slipping, or when the roof is past 30 years old, because patching a failing roof just moves the problem around. We’ll tell you honestly which one you need after an inspection. Call (844) 797-7958 to get that assessment.
How long does a barrel tile roof last in Burbank’s climate?
A barrel tile roof lasts 40 to 50 years or more on most Burbank homes, though the underlayment beneath the tile typically needs replacing around the 25-to-30-year mark. The tile itself handles Burbank’s summer heat and UV well; the underlayment and fasteners are the parts that age. This is why a proper underlayment and batten system on installation matters so much. If your tile roof is over 25 years old, call (844) 797-7958 for an inspection before the next rainy season.
Can you match my existing barrel tile when you repair my roof in Burbank?
We can match most existing barrel tile profiles and colors, and on many jobs we can reuse the original tile that comes off the roof so the repair blends in cleanly. When a specific tile is discontinued, we source the closest match from our manufacturer partners and show you samples before any work begins. Call (844) 797-7958 and we’ll look at your roof and tell you exactly what’s available.
Can you come out today for a barrel tile roof estimate in Burbank?
We answer every call with a live person, 24 hours a day, 7 days a week, so you can reach us any time and get a free estimate scheduled quickly. Actual roof inspections happen on a normal business schedule, but there’s no voicemail and no waiting until Monday morning to reach someone. Call (844) 797-7958 now and we’ll get you on the calendar.
Why homeowners in Burbank call us:
- 730-Day Done Right Promise on every project: if it’s not done right, we make it right
- Calls answered by a live person, 24/7, no voicemail black holes
- No-hassle upfront pricing: the number you see is the number you pay
- Background-checked, uniformed technicians on every job
- Up to 12 years of technician experience with clay and concrete tile systems
- Quality manufacturer partners such as James Hardie and KraftMaid across our trades, alongside GAF and CertainTeed for roofing products
- $1,000 off projects over $10,000 and 0% financing for 18 months
Barrel tile roofing in Burbank is a long-horizon decision. Done right, a clay or concrete tile roof can outlast the mortgage you took to install it. Get the underlayment, battens and flashing right and Burbank’s heat and wind stop being a threat to it. Call Groundwork Construction Co. of Burbank at (844) 797-7958 for a free estimate and design consultation, and we’ll give you a straight answer on what your roof actually needs.
Written by the team at Groundwork Construction Co. of Burbank, serving Burbank.


