







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWood Fence in Burbank, CA
A wood fence in Burbank typically costs $3,400 to $8,900 for a standard residential lot, with most homeowners landing between $4,800 and $6,500 for 100 to 150 linear feet of cedar or redwood privacy fencing. The final number depends on run length, height, material grade, gate count, and what the ground is doing under the posts – and in Burbank, that last part matters more than it does almost anywhere else in Los Angeles County.
We build wood fences here because wood is the right answer for most Burbank lots. It handles the heat, it’s repairable board by board, and it looks like it belongs against the stucco and Craftsman bungalows that line streets from Magnolia Park to Rancho Equestrian. We handle the full job – permits where they’re required, post setting, material selection from partners like James Hardie for trim and fascia details, and cleanup. Calls get answered by a live person, 24/7, so you’re not leaving a message and hoping. Ring (844) 797-7958 and we’ll set up a free estimate.
This page covers wood fencing specifically. If you’re still deciding between wood, vinyl, wrought iron, or composite, start with our overview of Fence Installation in Burbank and come back here once wood looks like the fit.
What We See on Burbank Fence Jobs
Burbank sits in a basin where summer temperatures regularly push past 100°F and the Santa Ana winds funnel through the Verdugo Mountains in fall. That combination is hard on wood. Posts dry out and shift. Boards cup and split. A fence that would last 20 years in a cooler, wetter climate might need real attention at year 10 here. We build with that in mind – deeper post footings, kiln-dried cedar or redwood rather than green lumber, and stainless or hot-dipped galvanized fasteners that won’t rust out in a decade.
We also deal with the realities of a built-out city. Property lines in Burbank are tight. Lots in the Rancho district run wide and equestrian-friendly; lots near downtown run narrow and close to the neighbor’s driveway. Knowing where the line actually is before the first post goes in saves a lot of awkward conversations later. We walk the line with you, flag encroachments, and build to the surveyed boundary.
- Storm damage and wind lean. After a Santa Ana event, we get calls from homeowners in the Hillside District whose fence is leaning 10 degrees into the neighbor’s yard. Usually it’s one or two failed posts, not the whole run.
- Failing along a shared property line. When your neighbor’s side is sagging and yours looks fine, it’s often the same fence. We’ll tell you straight what’s repairable and what needs replacing so you can split the conversation fairly.
- Dry rot at the base. Burbank’s irrigation-heavy landscaping keeps soil moist at the post line. We routinely pull posts in Magnolia Park that are rotted 8 inches up from the ground while the board above looks perfect.
- An aging fence before a sale. Realtors flagging a tired fence on a pre-listing walkthrough is a common trigger. A clean new wood fence changes how a yard photographs and how a buyer reads the property.
- A new pool or ADU. Pool barriers and accessory dwelling unit setbacks in Burbank have specific fencing requirements. We build to code so the inspection passes the first time.
- Privacy after a neighbor’s second-story addition. A common Burbank scenario – new construction next door opens up sightlines. A 6-foot board-on-board fence closes them back up.

Our Wood Fence Process
Every wood fence we build in Burbank follows the same sequence. No surprises, no mid-job change orders, no crew that disappears for a week.
- Free on-site estimate and line walk. We come out, measure the run, look at the ground conditions, check slope, and talk through material options. You get a written number before anything is ordered. Calls are answered by a live person, 24/7, so scheduling is a same-day conversation.
- Permit and HOA review. Burbank requires a permit for fences over 6 feet and for any fence in the front setback above 42 inches. If your property is in an HOA, we review the architectural guidelines up front so the design doesn’t get rejected after you’ve paid a deposit. We handle the paperwork.
- Material selection and order. You choose the wood species and style – dog-ear pickets, board-on-board, shadowbox, horizontal slat, lattice top, cap-and-trim. We order from verified suppliers and schedule delivery so material doesn’t sit on your lawn curing in the sun.
- Demo and post setting. Old fence comes out clean. Posts go in at 8-foot spacing, set in concrete footings sized for Burbank’s soil and wind exposure, with the bottom of each post treated or sleeved so it isn’t sitting directly against wet soil. This is where most fence failures start, and it’s where we spend the extra hour.
- Framing, picketing, and gates. Rails, pickets, trim, and gates go up. Gates get heavy-duty hinges and a proper latch – not the flimsy hardware that sags within a year. We check swing and clearance with you before we leave.
- Final walkthrough and cleanup. We walk the fence line with you, point out anything you want adjusted, haul off all debris, and hand over the warranty in writing. Every project is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right.
Most standard residential wood fence jobs in Burbank are completed in one to three days depending on run length and site access. Longer runs with multiple gates or complicated slope can stretch to a week. We give you the schedule in writing before we start.
Wood Fence Pricing in Burbank
Here’s what wood fence work actually costs in Burbank. These are real ranges based on the material, height, and complexity of jobs we see across the city – not national averages pulled from a pricing database. Your exact number comes from the free on-site estimate, and the number you see is the number you pay.
| Line Item | Typical Burbank Range |
|---|---|
| Cedar privacy fence, 6 ft, per linear foot (installed) | $38 – $58 |
| Redwood privacy fence, 6 ft, per linear foot (installed) | $52 – $78 |
| Board-on-board or shadowbox style, per linear foot | $48 – $72 |
| Standard walk gate (36 in), installed | $375 – $650 |
| Double drive gate, installed | $850 – $1,650 |
| Post replacement (rotted or failed), per post | $175 – $325 |
| Fence removal and haul-off, per linear foot | $5 – $11 |
| Sealing and staining (new or existing fence) | $1,200 – $2,800 |
| Burbank fence permit (city fee, varies) | $150 – $400 |
For a typical 120-foot Burbank backyard fence in cedar with one gate, expect to land in the $5,000 to $6,800 range installed, permit and cleanup included. A front-yard picket run at 42 inches for a Magnolia Park bungalow usually runs under $3,000. Long runs, steep grades, tight side-yard access, or significant rot repair push the number up.
What Affects Your Wood Fence Cost
- Wood species. Cedar and redwood cost more than pine or fir up front but last considerably longer in Burbank’s heat. The upgrade usually pays for itself before the first pine fence would need replacing.
- Run length and height. Linear footage drives most of the cost. A 6-foot fence costs more than a 4-foot; some HOA and city rules cap front-yard height at 42 inches in Burbank.
- Slope and grade. A fence on a hillside lot in the Verdugo foothills requires stepped or racked construction, which takes longer and costs more per foot than a flat run.
- Gates. Each gate is its own build. Double gates for RV access and custom gate widths add cost but add function.
- Site access. If the crew has to hand-carry material through a narrow side yard or across a finished landscape, the labor line goes up. We flag this at the estimate, not at invoice.
- Permit and inspection. Required for anything over 6 feet and for front-yard fences above 42 inches. We pull it and handle the inspection.
Financing and Offers
Larger fence jobs – a full perimeter replacement, a long board-on-board run with multiple gates, or a fence plus a patio cover using James Hardie materials – can be financed with 0% financing for 18 months, available to qualified homeowners. Any project over $10,000 qualifies for $1,000 off. No-hassle upfront pricing means no surprise line items at the end.
If the wood itself is beyond repair, our team can talk through material cost comparisons for alternate options, including composite and vinyl, on the main Fence Installation page.

Is It Cheaper to Repair or Replace a Wood Fence in Burbank?
Repair is cheaper in most cases if the fence is under 10 years old, has fewer than 4 to 6 failed posts, and the boards are sound. Replacement wins when the fence is over 15 years old, more than 20% of the boards are rotted or split, or the posts are failing across the run. For a 6-foot cedar fence in average Burbank condition, a repair typically runs $400 to $1,800 versus $5,000+ for a full replacement. We’ll tell you honestly which one makes sense at the estimate – we don’t push replacement on a fence that has another decade of life.
Wood Fence FAQs
How much does a wood fence cost in Burbank?
A standard 6-foot cedar privacy fence in Burbank runs $38 to $58 per installed linear foot, so a typical 120-foot backyard fence lands around $5,000 to $6,800 with one gate, permit, and cleanup. Redwood, board-on-board, and hillside lots cost more. Call (844) 797-7958 for a free on-site estimate – the number you see is the number you pay.
Do I need a permit for a wood fence in Burbank?
Yes, if the fence exceeds 6 feet in height or if a front-yard fence exceeds 42 inches, Burbank requires a permit and inspection. Interior side and rear fences at 6 feet or under typically do not require a permit unless your property is in an HOA with its own rules. Our team handles the permit paperwork and inspection scheduling for you.
How long does a wood fence last in Burbank?
A properly built cedar or redwood fence in Burbank lasts 15 to 20 years with sealing every 2 to 3 years. Construction grade pine or fir, or cedar that’s never sealed, tends to show real wear in 8 to 10 years given Burbank’s summer heat and dry wind. The difference is mostly in the post footings, the wood species, and whether the fence is stained. Every fence we build is backed by our 730-Day Done Right Promise.
Can you build a wood fence the same week I call?
Often, yes. Standard residential runs in Burbank and the surrounding areas can usually be scheduled within a week of the estimate, and short repair jobs can sometimes be handled within a few days. Permit-required fences add inspection time to the front end. Call (844) 797-7958 – a live person answers 24/7 and can give you a real schedule on the first call, not a callback promise.
Related Services and Nearby Areas
We handle wood fencing across Burbank and neighboring communities. If you’re outside the city limits, we’re likely already working near you.
- Fence Installation – our full-service fence page with all materials and styles
- Fence Installation in Burbank – broader overview including vinyl, composite, and iron options
- Fence Installation in Glendale – wood, vinyl, and iron fencing for our Glendale neighbors
- Fence Installation in Pasadena – fencing solutions for Pasadena’s historic homes and hillside lots
- Fence Installation in North Hollywood – nearby service area for wood privacy fences
- Fence Installation in Sherman Oaks – wood fences for hillside and valley properties
- Fence Installation in Studio City – fencing and gate work across the Valley
- Fence Installation in Toluca Lake – including HOA-friendly wood fence designs
- Home – Groundwork Construction Co. and our full service lineup
- Driveway & Pavers in Burbank – pairing a new fence with a driveway or hardscape refresh
- Roofing in Burbank – GAF and CertainTeed roof work for Burbank homeowners
- Kitchen Remodeling in Burbank – KraftMaid cabinetry and full kitchen renovation
We also work alongside homeowners planning bigger projects – a new fence is often part of a yard-and-exterior package that includes a patio cover, a shed using Tuff Shed, or an ADU build. Our team can scope all of it in one visit.
Contact Groundwork Construction Co. of Burbank for a Free Wood Fence Estimate
If your wood fence is leaning, sagging, rotted at the post, or just past its useful life, call (844) 797-7958 and we’ll get you a free on-site estimate. Calls get answered by a live person, 24/7. Every project is backed by our 730-Day Done Right Promise. Our technicians have up to 12 years of experience, they’re background-checked, and they show up in uniform. Your estimates include upfront pricing with no surprises, a free design consult, and access to 0% financing for 18 months plus $1,000 off on projects over $10,000.
Written by the team at Groundwork Construction Co. of Burbank, serving Burbank.


