







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterAluminum Fence in Burbank, CA
An aluminum fence is a powder-coated metal fence built from lightweight, rust-proof panels and posts, and in Burbank it’s the fence of choice for homeowners who want a clean property line without blocking the view, trapping heat, or dealing with termites. Most residential aluminum runs here cost $3,200 to $7,800 installed for a typical 100- to 150-foot lot line, and a standard job is finished in one to three days. If you’re weighing options, call (844) 797-7958 and we’ll give you a straight range before anyone sets foot on the property.
We install aluminum across Burbank’s hillside and valley neighborhoods, from the flat lots around Magnolia Park and Rancho Equestrian to the sloped yards up in the Verdugo foothills. Aluminum handles both well: it doesn’t rot in the dry summers, it doesn’t swell after winter rain, and it doesn’t sag the way wood does when it’s asked to follow a grade. That makes it a natural fit for the mix of ranch homes, Spanish-revival bungalows, and newer builds we work around every week. It’s one of the most requested materials on our Fence Installation service, and this page covers how we approach it specifically.

When You Need Aluminum Fence
Homeowners call us for aluminum for very specific reasons. These are the situations we see most in Burbank:
- You want to see the yard, not hide it. Aluminum’s open picket design keeps sightlines to a pool, a garden, or the San Fernando Valley view intact, which matters on the narrow lots common throughout Burbank.
- Your old wood fence is failing at the posts. In our climate, the ground dries out hard between rains and shifts after them, and wooden posts work loose in that cycle. Aluminum posts set in concrete don’t move the same way.
- You need a pool barrier that meets code. Burbank follows California pool safety requirements, and a self-closing, self-latching aluminum gate is often the cleanest way to bring an older pool enclosure up to standard.
- You’re on a slope and don’t want a stair-step mess. Foothill properties around Starlight Hills and the Verdugo hillsides need racked panels that follow the grade. Aluminum racks cleanly; wood rarely does without visible gaps.
- You want a boundary that holds up to the sun. Powder-coated aluminum doesn’t fade, warp, or need re-staining after Burbank’s summer UV exposure the way some wood and vinyl do.
- You’re enclosing a dog run or keeping small pets in. We can spec tighter picket spacing and a bottom rail low enough to stop a determined terrier without turning the fence into a solid wall.
If any of those sound like your situation, it’s worth a conversation. We also handle wood, vinyl, and wrought-iron-look barriers, so if aluminum turns out not to be the right call for your lot, we’ll tell you. You can see the full range of materials we install on our home page.
Our Aluminum Fence Process
An aluminum fence is only as good as the ground it’s set into and the hardware that holds it together. Here’s how we run the job from first call to final walkthrough:
- On-site measure and grade check. We walk the property line, check for slope changes, and locate the property pins. On sloped Burbank lots we note exactly where the fence needs to rack versus step so panels follow the ground instead of floating above it.
- Upfront written pricing. You get the number before we order a single panel. The price you see is the price you pay, and it’s backed by our free estimate and design consult. No line-item surprises once the work starts.
- Utility locating and post layout. Before any digging, we call for utility marking so we don’t hit irrigation lines, gas, or buried conduit. Then we set post spacing for even, square runs.
- Post setting in concrete. Posts go into concrete footings set below the local frost-and-shift line for our area. This is the step that separates a fence that stays true for years from one that leans within two seasons.
- Panel and gate installation. We hang panels to match the grade, install gates with proper hinges and latches, and confirm every gate swings true and closes on its own where code requires it.
- Final walkthrough and cleanup. We walk the line with you, check every post and gate, and leave the site clean. Any issue gets handled on the spot.
Background-checked, uniformed technicians handle every install, and our technicians have up to 12 years of experience on fencing and exterior work. Calls are answered by a live person 24 hours a day, seven days a week, so you’re never stuck leaving a voicemail when a gate is hanging wrong.

Aluminum Fence Pricing in Burbank
Aluminum fence pricing in Burbank runs from about $3,200 for a short, simple run to $7,800 or more for a large, sloped, gated install. Here’s a realistic line-item breakdown of what drives the number:
| Item | Typical Burbank range |
|---|---|
| Aluminum fence, installed (per linear foot) | $25 – $55 |
| Standard walk gate | $400 – $850 |
| Double driveway gate | $1,200 – $2,800 |
| Slope racking / custom grade panels | $8 – $18 per foot |
| Old fence removal and haul-away | $300 – $900 |
| Concrete footings and utility locating | Included in installed price |
A few things move the number most. The grade of the lot is the big one, since hillside properties need racked panels and deeper footings. Fence height matters too: pool barriers and taller privacy runs cost more per foot than a standard 4-foot boundary. Picket spacing and the finish you pick (standard colors versus premium powder-coat tones) shift the total a bit, and gates are the most expensive individual item on any job. Finally, tearing out an existing fence adds to the bill, though it’s often worth doing in the same visit.
Aluminum tends to land in the middle of the fence cost range: more than a basic wood privacy fence up front, less than a full masonry wall. But it doesn’t need the repainting or restaining a wood fence does, and with a long workmanship guarantee behind the install, the cost per year of service works out well. To make the project fit your budget, we offer 0% financing for 18 months and $1,000 off any project over $10,000. Every job is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right.
Want a real number for your lot line? Call (844) 797-7958 for a free estimate, and we’ll come measure and price it in writing.
FAQs – Aluminum Fence
How much does an aluminum fence cost in Burbank?
An aluminum fence in Burbank typically costs between $25 and $55 per linear foot installed, which puts most residential jobs in the $3,200 to $7,800 range. Gates, slope racking, and old-fence removal add to that. The lot’s grade is usually the biggest single factor. Call (844) 797-7958 for an exact quote; estimates are free.
How long does aluminum fence installation take?
Most aluminum fence jobs in Burbank are completed in one to three days. A straightforward 100-foot run on flat ground is often a single-day job once the materials are on site. Sloped hillside lots, multiple gates, and old fence removal can push it to two or three days. Concrete footings cure on their own after the posts are set, so you can use gates and the fence line right away.
Does aluminum fence rust or fade?
Powder-coated aluminum does not rust, and the factory finish holds its color through Burbank’s summer sun without the fading or peeling you get from a cheap paint job. The coating is baked on, not painted, so it resists chipping and corrosion the way raw steel can’t. We install panels from established manufacturers, with the same attention to materials we bring to everything from James Hardie siding to KraftMaid cabinetry.
Is it cheaper to repair or replace my aluminum fence?
If a single panel or gate is bent or a latch has failed, repair almost always wins and is the more economical choice. When posts have pulled loose, the coating is failing across multiple panels, or the fence has been hit in several places, replacement usually costs less over the next few years than patching it piece by piece. We’ll give you both numbers and tell you which one makes sense for your fence.
Can an aluminum fence meet pool safety code in Burbank?
Yes. A properly specified aluminum fence with a self-closing, self-latching gate can satisfy Burbank’s pool barrier requirements, including the minimum height and picket spacing rules. We check the current requirements before we spec the panels so the enclosure passes on the first inspection. Call us and we’ll walk you through what your pool area needs.
Do you handle sloped yards in the Burbank hills?
We do. Hillside and foothill lots across Burbank are common, and aluminum is well suited to them because panels can be racked to follow the grade instead of stepping in square jumps. We measure the slope during the estimate and set footings accordingly, so the fence follows the ground cleanly and stays true.
Whether you’re replacing a leaning wood fence, enclosing a pool, or finally marking a boundary that hasn’t been touched in years, aluminum is worth a look for a Burbank property. We keep the pricing upfront, back the work with our 730-Day Done Right Promise, and answer the phone with a real person any hour of the day. Reach out at (844) 797-7958 for a free estimate and design consult, and let’s get your fence line sorted.
Written by the team at Groundwork Construction Co. of Burbank, serving Burbank.


