







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterChain Link Fence Cost Per Foot in Burbank, CA: What Homeowners Actually Pay
Chain link fence costs $15 to $30 per linear foot installed on a flat suburban lot in Burbank. In the Rancho Equestrian District, where fences need 10-foot gate clearance for a horse trailer and posts set for lateral animal pressure, the spec changes, and so does the price. Groundwork Construction Co. of Burbank installs both, with upfront pricing that doesn’t move after the bid. Call (844) 797-7958 for a free estimate on your property.
Key Takeaways
- Standard residential chain link runs $15-$30 per linear foot; equestrian-grade specs push toward the top of that range and beyond on long runs.
- Gauge and coating are the biggest cost levers: 11-gauge galvanized vs. 9-gauge galvanized vs. vinyl-coated.
- Burbank permits apply to chain link over 6 feet in height and in certain front-yard setbacks.
- Chain link’s open mesh doesn’t block defensible space clearance the way solid panels do, a practical edge on hillside lots near the Verdugo foothills.
- Expect a full rear-yard job in the $3,500-$9,000 range for typical Burbank properties.

Why the Rancho Equestrian District Prices Differently
The Rancho Equestrian District is one of the few places in the San Fernando Valley where a rear fence is judged by whether a horse stays contained, not by how it looks from the street. That shifts the entire spec. Posts get set deeper and spaced tighter to resist lateral pressure from an animal leaning on the fabric. Corners and gates need heavier pipe. And the gate itself has to open wide enough for a trailer or tractor to pull through.
We’ve walked properties in the Rancho where the old fence had bowed at grade within a season because the installer used standard 1-5/8″ line posts and no tension wire. That’s the kind of shortcut a national cost guide never mentions, and it’s why we spec the way we do on animal properties.
- Gate openings: 10 to 12 feet for horse and equipment access. A standard 4-foot walk gate is useless when you’re moving a trailer.
- Corner and gate posts: 2″ or larger diameter pipe, not the standard 1-5/8″ line post. Gate posts take the load every time the gate swings.
- Bottom tension wire: run at grade to stop the fabric from bowing. On animal properties, this isn’t optional.
- Post spacing: tightened where large animals lean on the fence line.
These are standard in equestrian applications and absent from almost every generic cost calculator. They’re also the parts of the job that separate a fence that lasts from one you rebuild in two years. For the broader set of fence options we install across the city, see our Fence Installation page.
Chain Link Fence Cost Per Foot: Gauge and Coating Options
Gauge is wire thickness. Heavier gauge means a stronger fence and a higher per-foot price. Coating adds protection and years of life. Here’s how the Burbank market breaks down:
| Specification | Cost Per Linear Foot (Installed) |
|---|---|
| 11-gauge galvanized (entry-level residential) | $15-$22 |
| 9-gauge galvanized (large-animal pressure) | $20-$28 |
| Vinyl-coated chain link (adds protection) | $3-$6 additional per foot |
| Equestrian spec (2″+ gate posts, 10-12 ft gates, tension wire) | Top of range and above, quoted per job |
An 11-gauge galvanized fence is adequate for most residential side and rear yards. It holds up fine and keeps the cost down. If you’ve got horses or large dogs, 9-gauge is the smarter buy; the heavier wire resists bending and stays taut longer. Vinyl-coated chain link adsorbs the cost of an upgrade but earns it back in Burbank’s UV and salt-air-adjacent environment, where bare galvanized wire dulls and eventually corrodes. The coating stretches the fence’s service life by years.
For most rear-yard jobs in Burbank, full installed projects land in the $3,500-$9,000 range depending on linear footage, gate count, and spec. Long runs with multiple gates on equestrian properties push higher.

The Burbank Permit Question Most Homeowners Miss
Chain link is often treated as the no-permit material. In Burbank, that assumption costs people time. The city requires a permit for chain link fence over 6 feet in height, and in certain front-yard setbacks, a permit is triggered regardless of height. Some applications also require a site plan showing the fence line.
That adds permit cost, a review window, and paperwork to what looked like a simple weekend project. We pull the permit as part of the job so the fence passes inspection and nothing surfaces later when you sell or remodel. Burbank’s building-safety enforcement is aggressive compared to neighboring cities, and unpermitted fencing is one of the things that gets caught on a property records pull.
Fire Clearance and Hillside Lots Near the Verdugo Foothills
Hillside streets above the valley floor carry some of the tightest fire-clearance scrutiny in the region. Vegetation management rules affect where you can place a fence and what it can be made of. This is where chain link earns its keep.
Its open mesh construction means it doesn’t impede defensible space clearance the way a solid-panel wood or vinyl fence does. Wind moves through it, and it doesn’t create the fuel load a solid barrier can. For a hillside lot in Burbank’s fire-risk zones, that’s a real practical advantage that has nothing to do with budget. It also means the fence placement can satisfy clearance requirements without forcing you to sacrifice the boundary line you need.
Why the Crew Matters on a Chain Link Job
Installing chain link on an equestrian property means working around animals and in areas with limited access. Trucks can’t always get to the fence line. Gates are narrow. Animals are present. The crew’s discipline matters as much as the price per foot.
Groundwork Construction Co. of Burbank sends background-checked, uniformed technicians on every job. Our technicians have up to 12 years of experience, and every project is covered by the 730-Day Done Right Promise. If something’s not right, we make it right. Calls are answered by a live person, 24 hours a day, so you’re not waiting until Monday when a gate won’t latch. We use trusted material partners like James Hardie where fencing abuts structures and Tuff Shed where a fence line meets a shed footprint.
Homes in Magnolia Park and the Rancho Equestrian district often have original additions and converted garages that surface the moment a permit gets pulled. We plan for that and keep the project moving. See how our Fence Installation in Burbank work fits your property, or start at our home page to see the full scope of what we build.
FAQs
Chain link fence in Burbank costs $15 to $30 per linear foot installed, depending on gauge, coating, and gates. Equestrian-spec jobs with wide gates and heavier posts quote per job because the spec varies so much. Call (844) 797-7958 for an exact quote, and estimates are free.
Yes, if the fence is over 6 feet tall or sits in certain front-yard setbacks. Burbank requires a permit in those cases, and some applications need a site plan. We handle the permit as part of the job so the fence is compliant. Call (844) 797-7958 to talk through your fence line.
Usually yes. Chain link typically runs $15-$30 per foot installed, while vinyl fence installation in Burbank lands in the $3,500-$9,000 range for a full job. Chain link’s open mesh is also the better choice where fire clearance matters. Call (844) 797-7958 for a comparison quote.
Yes, if it’s specced correctly. That means 9-gauge wire, 2″ or larger gate and corner posts, bottom tension wire, and tighter post spacing. A standard residential install won’t hold. Call (844) 797-7958 and we’ll spec the fence for your animals.
Get a Straight Price for Your Burbank Fence
Fence pricing shouldn’t be a guessing game. Tell us your linear footage and what the fence needs to do, and we’ll give you an upfront number with no surprises. Free estimate and design consult, and no-hassle financing available. Call (844) 797-7958 today.
Written by the team at Groundwork Construction Co. of Burbank, serving Burbank, CA.
What Our Customers Say
"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."
- Angela Wong"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."
- Laura Bennett"Quality work and honest pricing. He is stretched across a few jobs at once so he is not always on site, though the carpenter who was there knew everything."
- Whitney Norris












