







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterDriveway Sealing in Burbank, CA
Driveway sealing in Burbank, CA typically runs $1.50 to $3.50 per square foot, and most residential driveways land between $350 and $900 for a full seal and cure. A standard two-car driveway of roughly 400 to 600 square feet, cleaned and sealed with a quality acrylic or asphalt-based product, is usually a one-day job. We do it for homeowners across Burbank because asphalt here takes a beating that most of Southern California doesn’t deal a driveway: intense summer UV, the dry Santa Ana wind season, and the occasional heavy winter rain that finds every crack worth finding.
Sealing isn’t cosmetic paint over a problem. It’s the coat of armor that keeps water out of the asphalt base, stops the sun from baking the binder oil out of the surface, and delays the day you have to think about a full repaving. On a modest Burbank driveway that repaving bill runs $4,000 to $9,000 or more. A sealing job every few years protects that investment for a fraction of the cost.
Groundwork Construction Co. of Burbank handles driveway sealing under our broader Driveway & Pavers service, and we treat it with the same systems we bring to a roof or a kitchen: upfront pricing you agree to before we start, background-checked technicians in uniform, and our 730-Day Done Right Promise behind the workmanship. If the seal fails to bond or wears prematurely, we make it right. Call (844) 797-7958 to book a free estimate and we’ll walk the driveway with you.

When You Need Driveway Sealing
Most Burbank homeowners don’t think about sealing until something goes wrong. Here’s what we actually look for when we pull up to a driveway in this city.
- The surface has turned chalky or gray. New asphalt is deep black. When yours fades to a washed-out gray, the UV has cooked the binder oil out of the top layer. In Burbank’s summer sun, an unsealed driveway can start showing that fade in as little as two to three years.
- Water is pooling or soaking in instead of running off. Healthy asphalt sheds water to the edges and the street. If you’re seeing dark wet patches that linger for hours after rain or your irrigation runs, the surface has gone porous and needs a seal to close it back up.
- Hairline cracks are spreading. Small cracks near the driveway apron on a Burbank property are almost a guarantee after a dry Santa Ana season followed by a wet winter. Sealant won’t fix a wide crack on its own, but sealing a freshly cleaned, crack-filled surface stops water from getting under the asphalt and turning a $40 crack into a $4,000 sinkhole.
- The edges near the street or a planter are crumbling. This is common where a driveway meets a yard or a curb and water has been quietly working at the edge for a couple of seasons. Sealing the surface alone won’t fix a failing edge, so we’ll flag it and talk through the repair before we coat anything.
- You’re selling, or you just bought. A freshly sealed driveway is one of the cheapest curb-appeal moves on the house, and buyers notice a driveway that looks maintained versus one that looks neglected. If you just closed on a home in Burbank, a seal is a smart first-year line item.
- It’s been three to five years since the last seal. That’s roughly the cadence a Burbank driveway wants. If you can’t remember the last time yours was sealed, that’s your answer.
One condition to know: fresh asphalt needs to cure 6 to 12 months before it’s sealed, or the sealant can trap oils and solvents that never fully escape. If your driveway was poured recently, hold off. We’ll tell you the right timing when we look at it.
Our Driveway Sealing Process
Sealing a driveway wrong is easy. You can buy a jug at a big-box store and roll it on a dirty surface and it’ll look great for a season. Doing it right is a sequence, and the sequence is what we follow on every Burbank driveway.
- Walk and assess. We start by walking the whole driveway with you. We check for cracks, alligator cracking, edge failures, oil stains, and drainage issues. If the asphalt is too far gone to benefit from sealing, we’ll say so and talk through repair or replacement instead of selling you a coat that won’t hold.
- Clean the surface completely. Sealing over dirt, moss, or oil is how sealant fails early. We power-wash and scrape, treat oil spots with a degreaser, and clear debris from cracks and edges. The surface then needs to dry fully before any product goes down.
- Fill and address cracks and defects. Small cracks get a proper crack filler rated for the repair. We make sure the filler seats and sets before the seal coat. Larger structural issues get flagged for a separate repair conversation so you know what you’re choosing between.
- Apply the sealant. We use a commercial-grade acrylic or asphalt-based sealant applied at the recommended thickness, not a thin cosmetic wash. Coverage typically means one to two coats depending on surface condition and how porous the driveway is. Edges and the apron get the same attention as the field.
- Final walk-through and cure. We walk the finished job with you, confirm the coverage and edges look right, and tell you exactly how long to stay off it. Most seal jobs want 24 to 48 hours of drying time, sometimes longer depending on weather, and no driving or parking on it until that’s done.
Because most Burbank driveway sealing jobs are done in a single visit, you’re not managing a crew for days. We come out, we do the work, we walk it with you.

Driveway Sealing Pricing in Burbank
Here’s what a seal really costs in this market. These are honest ranges based on what we see on Burbank driveways, and your exact number depends on the size and condition of yours. The free estimate gives you the real figure before anything starts. Upfront pricing, no surprises.
- Standard coat, two-car driveway (roughly 400 to 600 square feet): $350 to $650
- Larger or longer driveways (600 to 1,000 square feet): $650 to $1,100
- Crack filling: $3 to $8 per linear foot, depending on crack width and depth
- Oil stain treatment: $25 to $75 per stain
- Second coat where surface condition calls for it: adds roughly 35 to 50 percent to the coat price
- Edge or apron repair, if needed: quoted separately after inspection
What moves the number up or down? Size matters most, then condition. A driveway that’s been sealed every three years cleans up fast and takes a single coat; one that’s been ignored for a decade needs more prep, more crack filling, and sometimes a second coat. Access is a factor too. A long narrow driveway off a tight Burbank hillside street is a little more labor than a wide flat one. Weather can shift scheduling, since sealant needs dry, warm conditions to cure, so we plan around the dry season where possible.
If this is part of a bigger pavement project, our Driveway & Pavers in Burbank page covers the full range of surfacing options, from sealing to full hardscape installs. And on any project over $10,000 we apply our standing $1,000 off, plus 0% financing for 18 months so a larger scope stays accessible. Call (844) 797-7958 for a free estimate and we’ll get you an exact number.
What Makes a Sealing Job Last in Burbank
Two driveways can be sealed on the same block with the same product and one lasts twice as long as the other. The difference is almost always in the prep and the product, not the brand on the jug. We clean until the surface is genuinely clean, we don’t dilute a commercial product to stretch coverage, and we apply at thickness. Then we get out of the way and let it cure properly.
The other thing that makes a sealing job last is timing. In Burbank the sweet spot is typically late spring through early fall, when the weather is dry and warm and the surface dries cleanly. Sealing right before a rainstorm is a waste of money, and we won’t do it. We’ll schedule you for conditions the coat can actually cure in.
We also recommend a realistic reseal cadence: every three to five years for most Burbank driveways, more often if the driveway gets heavy sun exposure or you’re sealing over a seal. That’s the maintenance rhythm that keeps asphalt out of the “replace it” conversation for as long as possible.
Frequently Asked Questions About Driveway Sealing
How much does driveway sealing cost in Burbank?
Most Burbank driveways cost $350 to $900 for a full clean, crack-fill, and seal, with the exact price driven by square footage and surface condition. A standard two-car driveway usually lands in the $350 to $650 range, while larger driveways and heavy prep push toward the top of that band. Call (844) 797-7958 for an exact quote. Estimates are free.
How often should I seal my driveway in Burbank?
Every three to five years is right for most Burbank driveways, and the shorter end of that applies if yours faces full summer sun or you’re sealing over an existing coat. A driveway that’s been left longer than that usually needs more prep and crack filling before sealing, which raises the cost. If you’re not sure when yours was last sealed, that’s a good reason to have us take a look.
Can you seal my driveway the same day I call?
Sometimes yes, sometimes no, and it depends on scheduling and weather. Sealing needs a dry, warm window so the coat cures properly, so we won’t squeeze a job in before a rainstorm just to make the calendar work. Call us and we’ll give you the earliest good date for your Burbank driveway. Our line is answered by a live person 24/7, so you’re not waiting until Monday for an answer.
Is it cheaper to repair or replace a failing driveway?
Repair and reseal is almost always cheaper than replacement when the asphalt is still structurally sound and the problems are surface-level. A sealing job at a few hundred dollars protects a surface worth several thousand. Once the base is failing, though, sealant won’t save it, and we’ll tell you that straight. We look at the driveway honestly and point you toward the choice that actually fits the condition, whether that’s sealing, patching, or replacement.
Groundwork Construction Co. of Burbank seals driveways the way we handle every trade we work in: with a clean process, upfront pricing, and our 730-Day Done Right Promise standing behind the work. Our technicians have up to 12 years of experience, they’re background-checked, and they show up in uniform. We answer the phone with a live person 24/7. We work with top-tier material partners across our trades the same way we’d want a driveway product chosen for durability, not for the cheapest available drum. Call (844) 797-7958 today for a free estimate on your Burbank driveway. The number you see is the number you pay.
Related services from Groundwork Construction Co. of Burbank
Sealing is one piece of keeping a Burbank home’s exterior in shape. Explore the rest of what we do: home, Driveway & Pavers, Driveway & Pavers in Burbank, Kitchen Remodeling, Bathroom Remodeling, Roofing, Windows & Doors, Fence Installation, and Home Additions & ADU.
Written by the team at Groundwork Construction Co. of Burbank, serving Burbank.


