







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
What Door Installation in Altadena Actually Involves
Door Installation in Altadena usually runs $850 – $4,200 per door once you account for custom sizing, hardware, and finish work, and most single-door jobs land on the schedule within two to four weeks of the estimate. Entry and interior doors in this town are rarely a drop-in swap, because the homes are older and nothing is a standard size. Call (844) 797-7958 to set up a free on-site estimate, and we’ll measure the rough opening before anyone quotes a number.
How We Run a Door Installation Project, Step by Step

Every door in Altadena gets treated as a one-off, so the sequence matters more than the speed. Here’s what a typical project looks like from first measurement to final walkthrough.
Stage 1: Measure and map the opening (day 1, about an hour)
We pull the trim and check the rough opening, the plumb of the jamb, and whether the existing door was ever fit to a square frame. In 1920s – 1950s homes this is where we find the surprises: a header that has settled, a floor that slopes a quarter inch across the threshold, or a frame that was shimmed by hand decades ago. You decide at this stage whether to match the original opening exactly or take the opportunity to correct it.
Stage 2: Order and confirm specifications (week 1)
Once measurements are locked, you choose the door, hardware, and finish. Custom sizes add lead time, so this is the decision point that drives the whole calendar. We confirm the swing direction, the handing, the threshold style, and whether the door needs to meet Chapter 7A fire-hardening requirements if it’s in an exterior wall.
Stage 3: Demo and prep (day 2, 2 – 4 hours)
Old door and trim come out, the opening gets cleaned and inspected for rot or termite damage, and any structural correction happens before a new frame goes in. On a hillside home off Mendocino or Santa Rosa, that inspection occasionally turns up a jamb that pulled loose from a settling foundation. If we find rot, we flag it and quote the repair before moving forward.
Stage 4: Set, shim, and seal (day 2, 3 – 5 hours)
The new door goes into the opening, gets shimmed plumb and square, and is checked for a consistent reveal all the way around. Exterior doors get flashed and sealed at the threshold and the frame. This is the stage where cheap installation shows up later as a draft or a door that sticks in summer.
Stage 5: Hardware, trim, and walkthrough (day 3, half day)
Hinges, lockset, deadbolt, and any smart lock get installed and tested. Casing and trim go on to match the house. We do a final walkthrough together: swing, latch, weatherstripping, and finish, all checked before we call it done. Most single-door jobs wrap in one to three days of actual on-site work, spaced by lead time.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Door Options You’ll Choose Between
Altadena’s housing stock means the material choice is often about matching what’s already there, not chasing the latest thing. Here’s what we walk you through:
- Solid wood vs. engineered wood: Solid wood matches the original detailing on Craftsman bungalows and Spanish Colonial Revivals, but it moves with humidity and costs more. Engineered cores hold their shape better and cost less, at the expense of that authentic heft.
- Fiberglass entry doors: A strong pick for the foothill fire zones, since many fiberglass models meet Chapter 7A requirements and won’t warp. The trade-off is that the grain never quite looks like the real thing up close.
- Steel doors: Durable and secure, and the most economical of the exterior options. They dent, though, and they need repainting more often than fiberglass.
- True divided-light vs. simulated: If the house has original divided-light glazing, matching it is worth considering, since a mismatched door reads as a replacement from the curb.
- Hardware and smart locks: A smart lock integration pairs well with the whisper-quiet openers and home-automation setups common in the custom homes here, but only if the door’s stile is thick enough to house it.
What Door Installation Costs in Altadena, CA

Expect a realistic range of $850 – $4,200 per door. Five things push a job toward the high end:
- Door size and custom fit: A standard stock size stays near the low end; a custom-milled door to match a non-standard opening adds several hundred dollars.
- Existing condition: A settled header or rotted jamb turns a swap into a repair.
- Material grade: Solid wood and premium finishes sit at the top; steel and stock fiberglass sit at the bottom.
- Hardware and locking: A smart lock and premium hardware add cost but are worth pricing in upfront.
- Permit scope: A like-for-like replacement usually doesn’t trigger a permit; a new opening in an exterior wall, or one that changes the structure, does.
A written estimate from us shows the door, hardware, labor, trim, and disposal as separate line items, so you can see exactly where the money goes. What it won’t include is structural repair or rot found after demo, which we quote before touching it. Upfront pricing, no surprises: the number you approve is the number you pay, backed by our 730-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterWhat Altadena Homes Specifically Do to This Door Installation Job
Most housing here dates from the 1920s – 1950s, and the combination of individually designed structures, narrow oak-lined lanes, and strict tree-protection rules makes every door project a one-off. On the sloping foothill lots, a settled jamb or a floor that’s out of level is routine, not unusual, and we plan for it. If the door is part of a larger exterior change, it’s often smart to fold it into a Windows & Doors in Altadena scope so the flashing, trim, and finish all get handled together. Owners frequently pair this work with Cabinets & Countertops in Altadena when an opening gets moved during a kitchen refresh, or with a Garage Conversion ADU in Altadena when a new exterior door is needed for a converted space.
Exterior doors in the foothill zones also need to meet Chapter 7A wildfire building requirements, which affects both the door and the weatherstripping around it. Winter downpours test thresholds on hillside homes, so we pay particular attention to flashing and drainage at the base of the door. We cover the full Altadena area, from the lanes off Mendocino and Santa Rosa to the slopes above. For the wider category, see our Windows & Doors service.
Serving Altadena, CA – Our Local Coverage Area
We serve Altadena and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked About Door Installation in Altadena

A single door is usually one to three days of on-site work, plus lead time if the door is custom-ordered. Stock doors can often be installed in a day. Call (844) 797-7958 for a timeline based on your specific opening.
A like-for-like replacement generally doesn’t require a permit, while cutting a new opening in an exterior wall or making structural changes does. We’ll tell you what’s required before work starts and pull permits where needed.
Yes. Most door swaps stay within the existing opening, with no plumbing or structural work at all. If we find rot or settling after demo, we quote the repair separately before proceeding.
Most single doors run $850 – $4,200, depending on size, material, and whether repair work is needed. Call (844) 797-7958 for an exact quote; estimates are free.
All our work is covered by the 730-Day Done Right Promise: if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space.
Get a Free Door Installation Estimate in Altadena
If you’re weighing a new entry or a set of interior doors in Altadena, the first step is a free on-site estimate. We’ll measure the opening, talk through door options and hardware, and hand you a written line-item quote. Call (844) 797-7958 to schedule; a live person answers, and there’s no obligation.
Written by the team at Groundwork Construction Co.












