







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in Pasadena: What It Takes and What It Costs
Concrete Driveways & Concrete Work in Pasadena typically runs $4,500 – $12,000 for a new pour and $5,000 – $14,000 for a full tear-out and replacement, with most residential jobs finished in 3 – 6 working days plus cure time before you park on it. The work covers demolition of the old slab, subgrade prep and compaction, formwork, rebar or mesh, the pour itself, finish, control joints, and final grading so water runs away from the house. Call (844) 797-7958 for a free on-site estimate with a written line-item quote.
How the Job Actually Runs, Day by Day

Concrete is unforgiving of shortcuts, so the schedule matters more than the pour. Here’s the real sequence we work through on a Pasadena driveway.
Stage 1: Site visit and measure (day 0)
We walk the driveway, check slope away from the garage and foundation, note where the downspouts and yard drains discharge, and look for tree roots, old patching, and any utility covers in the pour zone. Then you get a written quote with square footage, thickness, reinforcement, and finish priced as separate lines. Budget 45 – 60 minutes.
Stage 2: Demolition and haul-off (day 1)
A typical two-car driveway of 500 – 700 square feet comes out in one day with a skid-steer and a breaker. Old slab, base, and any failed subgrade leave in a dumpster or end-dump trailer. If your home is pre-1940s and the drive runs to a historic garage, we confirm what’s being touched before anything gets broken. You’ll want cars off the drive the night before.
Stage 3: Subgrade prep and forms (day 2)
This is the stage most cheap bids skip. We excavate to depth, compact the native soil, bring in 4 – 6 inches of compacted class II base, and set wood or steel forms to grade with a slight fall away from the structure. Rebar grid or welded wire mesh gets tied and chaired off the ground so it sits mid-slab, not on the dirt. A 4-inch slab for foot traffic and light cars; 5 – 6 inches where trucks or RVs park.
Stage 4: Inspection and pour (day 3)
If your project needs a permit, the city inspector signs off on forms, reinforcement, and base before the truck backs in. The pour itself is a few hours. Finish is where you make your real decision: broom, light salt, exposed aggregate, or saw-cut control joints in a pattern you choose. We cut joints within 12 – 24 hours to steer cracking.
Stage 5: Cure and striping (day 4 – 6)
You stay off it for 48 – 72 hours, and heavy vehicles shouldn’t roll on it for about a week. We pull forms, backfill the edges, and do final cleanup. Full cure runs 28 days; hairline shrinkage cracks during that window are normal and not a defect.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices That Actually Change the Slab
- Thickness and reinforcement. A 4-inch slab with mesh handles cars fine and lands at the low end of the range. Step up to 5 – 6 inches with a #4 rebar grid if you park a truck, trailer, or have clay-heavy soil.
- Finish. Broom finish is the standard – a good grip, low cost, hides tire marks. Exposed aggregate adds texture and cost. Salt finish sits between them. Stamped patterns are a separate page in our lineup; we’ll point you there if that’s what you want.
- Color and integral pigment. Whole-slab color runs roughly 15 – 25% more than gray. It fades unevenly if the pour isn’t consistent, so it’s a job for a crew that does volume.
- Joints. Saw-cut joints on a 10 – 12 foot grid are the cheapest crack control. Decorative joint layouts and seamless pours trade cost for looks.
- Base and drainage. A swale, channel drain, or trench drain at the garage apron matters if your existing drive pools water. Skipping it is the #1 reason a new slab heaves or cracks in Pasadena’s clay soils.
Brands don’t matter much on a gray slab, but for the finished approach at the front door – a walkway connection, a garage door frame, a front entry door swap that pairs with the new pour – we work with Therma-Tru and Mr-Glass when the project crosses into entry work. If your project grows into a wider scope, our Driveway & Pavers in Pasadena page covers the fuller picture.
What Concrete Driveways & Concrete Work Costs in Pasadena, CA

Plan on $4,500 – $12,000 for a standard new concrete driveway in Pasadena, and $5,000 – $14,000 when the old slab has to come out and the base rebuilt. That’s a real number for a 400 – 700 square foot drive, not a teaser.
What pushes a job toward the high end:
- Size and access. A narrow lot with no truck access means wheelbarrowing concrete, which adds labor. Long drives over 800 square feet scale up fast.
- Condition of the old slab and base. A slab sitting on failing fill or clay requires over-excavation and import base – sometimes 30 – 40% of the total.
- Drainage work. Adding a channel drain, catch basin, or regrading the yard to shed water can add several hundred to a couple thousand dollars.
- Finish and color. Broom at one end, exposed aggregate or integral color at the other.
- Permit and inspection scope. Driveway widening, new curb cuts, or anything in the public right-of-way pulls in a city permit and inspection cycle.
What’s included in our written estimate: demo, haul-off, base, reinforcement, forms, pour, finish, joints, cleanup. What usually isn’t: landscape repair, gate or fence rebuild, driveway widening into city right-of-way, and any gas, water, or electrical line that needs relocating. We flag those on the quote, not the invoice. If the project includes a full front-yard scope, our Driveway & Pavers service covers the wider work.
See the difference
Before
After
Before
After
Before
AfterWhat Pasadena Homes Do to This Job
Pasadena’s historic preservation rules change the calculus here more than most cities. Neighborhoods like Bungalow Heaven and the Marengo Avenue corridor sit inside some of California’s largest concentrations of designated historic districts, and the Cultural Heritage Ordinance means exterior work on pre-1940s properties often starts with a landmark or historic-district check – a Certificate of Appropriateness in some cases – rather than a straight over-the-counter permit. That review can stretch a project across weeks or months even when the driveway itself is a straightforward pour. We build that scheduling into the bid before we ever break ground.
The housing stock drives the work too. Craftsman bungalows and Spanish Colonial Revival homes from the 1890s – 1930s often have original garage aprons that were poured thin and low, then heaved and settled over decades. Postwar mid-century tracts have different issues: shallow slab-on-grade that cracks at the expansion joint where the drive meets the street. And the San Gabriels bring hot dry summers and Santa Ana wind events that dry-cure concrete fast – we cover and mist freshly poured slabs to slow the cure and prevent surface crazing. We serve all of Pasadena and the surrounding blocks, including ZIPs 91116, 91117, 91121, and 91123 – see our Pasadena page for the full map of coverage.
Serving Pasadena, CA – Our Local Coverage Area
We serve Pasadena and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Concrete Driveways & Concrete Work in Pasadena

A standard residential driveway runs 3 – 6 working days on site, plus 48 – 72 hours before you can park on it and up to 28 days for full cure. If a historic-district review is triggered, add the city’s review timeline on top of that. Call (844) 797-7958 for a schedule specific to your address.
It depends on what you’re doing. A like-for-like replacement in the same footprint is often permit-exempt, but driveway widening, new curb cuts, or work that touches the public right-of-way typically requires a city permit and inspection. Historic-district properties may also need a preservation review. We handle the permit pull and inspection scheduling when one is required.
Yes – most driveways are poured without touching structure, gas, water, or electrical. We survey utility covers and clean-outs on the day-0 walk, then design the slab and joints around them. If a line needs relocating, that line gets priced on the estimate, not surprised on the invoice.
Replacement runs $5,000 – $14,000 for a typical 400 – 700 square foot drive, depending on demolition scope, base condition, finish, and any drainage work. New pours start at $4,500 and cap near $12,000. Call (844) 797-7958 for an exact quote – estimates are free and written line by line.
All our projects are covered by the 730-Day Done Right Promise – if it’s not done right, we make it right, one of the longest workmanship guarantees in residential construction. That covers our workmanship; concrete’s own shrinkage cracking is a separate conversation we walk through at the final walkthrough.
Get a Free Estimate for Concrete Driveways & Concrete Work in Pasadena
Call (844) 797-7958 to schedule a free on-site estimate for Concrete Driveways & Concrete Work in Pasadena. We’ll measure the drive, walk the drainage, talk through thickness, finish, and joints, and hand you a written line-item quote – no change orders, no surprises. Calls are answered by a live person 24/7. If your project grows into an ADU or accessory structure, homeowners often pair this with ADU Site Prep & Utilities in Pasadena, and garage-entry or front-door swaps commonly pair with Door Installation in Pasadena.
Written by the team at Groundwork Construction Co.












