







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterCabinet Refacing vs Replacement in Burbank, CA: Choose Replacement Unless Your Boxes Are Worth Saving
Choose cabinet replacement over refacing for most pre-1950 Burbank kitchens, because the original boxes are usually too shallow, too soft, or too water-damaged to carry modern hardware. Choose refacing only when your cabinet boxes are solid plywood, at least 12 inches deep, and you plan to stay put for fewer than five years. Cabinet refacing vs replacement isn’t a style debate in Burbank. It’s a question about what’s underneath the doors. Call Groundwork Construction Co. of Burbank at (844) 797-7958 for a free assessment and a straight answer on which path your kitchen needs.
Cabinet refacing makes financial sense when the boxes underneath are worth $4,000. In a 1940s Burbank bungalow with 10-inch-deep original cabinets and no corner solutions, those boxes are often worth zero.

Why Burbank’s Housing Stock Changes the Math
Burbank sits in a hot, dry San Fernando Valley basin, and its housing runs from 1920s-40s Spanish Revival and Craftsman bungalows in Magnolia Park to 1950s-60s ranch tract homes in the hills. That older single-family stock is where refacing quotes go sideways. The Magnolia Park bungalows in particular routinely hide unpermitted additions and converted garages that surface the moment a remodel pulls a permit, and kitchens in those homes were built decades before anyone owned a 36-inch refrigerator or a pull-out trash drawer.
We also work in studio-adjacent homes where residents need permit-ready, camera-friendly results on tight turnaround. The city’s aggressive building-safety and seismic enforcement adds a layer most neighboring cities don’t have, so any cabinet work that touches walls, plumbing, or electrical has to be planned around inspection.
What we find under the doors in these homes is consistent across dozens of kitchens:
- Cabinet boxes 10 to 11 inches deep instead of the modern 12-inch minimum
- Fir or pine face frames with thin back panels or none at all
- Water damage and soft wood at the base, from original plumbing that has dripped for decades
- No corner solutions, no drawer banks, and shelving sized for dishes that no longer exist
What to Look For Before You Refacing Anyone’s Quote

Is the Box Underneath Worth $4,000?
Run this test before you sign a refacing contract. If any answer lands in the “no” column, refacing is applying good money to a compromised structure.
| Check | Refacing works if… | Replace instead if… |
|---|---|---|
| Cabinet depth | 12 inches or deeper | Under 12 inches (common in pre-war Burbank) |
| Box material | Plywood construction, full back panel | Face-frame only, thin or missing back |
| Water damage | Dry, sound wood at the base | Soft, stained, or swelling board near plumbing |
| Hardware load | Wood holds screws under torque | Original fir or pine strips under soft-close hinges |
| Layout function | Modern appliances and storage fit | You need pull-outs, drawer banks, or corner access |
| Years staying | Fewer than five | Long-term, or resale in a hot market |
The depth number is the one people skip. If your boxes are 10 inches deep, refacing them gives you beautiful new doors on a cabinet that still won’t hold a dinner plate at full depth. The storage problem stays. You’ve just paid to hide it.
Why Modern Hardware Fails on 1940s Cabinet Boxes
Soft-close hinges and full-extension drawer slides need a minimum wood thickness and screw-pull strength that 1930s to 1950s fir and pine don’t always deliver. The wood has dried for 80 years, the grain has stiffened, and the screw holes have already been reused once or twice. We’ve seen refaced cabinets where a drawer slide pulls loose within a year because the box was never built for the torque a loaded 100-pound drawer puts on it.
Replacement solves this at the source. New boxes mean factory-bored hinge plates, solid drawer-bottom construction, and hardware rated for the load. That’s part of why we back replacement work with the 730-Day Done Right Promise. If a hinge fails, a box separates, or a drawer slide breaks, we make it right. That two-year workmanship coverage changes the ROI math on replacement in a way most refacing quotes never mention, because refacing warranties typically stop at the door finish.
Our technicians have up to 12 years of experience reading what a cabinet box will and won’t hold, and that read is the whole decision.
When Refacing Is the Right Call
There’s a legitimate refacing case, and we’ll tell you when it’s yours. A home less than 20 years old, plywood boxes at proper depth, and a homeowner staying put fewer than five years: refacing with KraftMaid door profiles is a cost-effective, low-disruption choice. The doors and drawer fronts go on quality carcasses, the finish is factory-grade, and you skip the demolition and the permit cycle. The brand partners we work with mean you’re choosing door profiles and finishes from a real catalog, not picking from whatever the last truck carried.
For a full reconfiguration, including pull-out shelves, drawer banks, corner solutions, and new appliance clearances, you’re looking at the broader work covered on our Kitchen Remodeling page rather than a refacing job. The same logic applies to our Kitchen Remodeling in Burbank work, and to the home improvements that tie into it.
What Does Refacing vs Replacement Cost in Burbank?
Cabinet installation in Burbank typically runs $4,000-$13,000 as a standalone line item, and a full kitchen remodel here ranges from $14,000 to $45,000. Refacing usually lands in the lower part of that cabinet band; replacement with new boxes, hardware, and finish lands at the upper end or above. Here’s how a cabinet project pencils out:
| Line item | Burbank range |
|---|---|
| Cabinet installation (standalone) | $4,000-$13,000 |
| Countertop installation | $2,000-$6,500 |
| Backsplash installation | $800-$2,500 |
| Kitchen island installation | $3,000-$10,000 |
| Full kitchen remodel | $14,000-$45,000 |
| Small kitchen remodel | $9,000-$20,000 |
Two standing offers take the sting out of the bigger number. We run upfront pricing so the number you see is the number you pay, and we offer 0% financing for 18 months plus $1,000 off projects over $10,000. That’s what makes a full replacement budget feel different from a refacing quote that grows once the install reveals a soft base. Calls are answered by a live person 24/7, so you’re not waiting until Monday to ask.
Other work around the kitchen often comes up in the same conversation, including home additions and bathroom remodeling. Cabinet placement can affect your window replacement layout, your hardware choices, and your flooring schedule. It’s worth planning the cabinet decision with those trades in view.
Frequently Asked Questions
Yes, refacing usually costs less upfront than replacement, often landing in the lower band of the $4,000-$13,000 cabinet installation range, while a full kitchen replacement with new boxes runs into the $14,000-$45,000 range. But cheaper only holds if the existing boxes are sound, deep enough, and able to carry modern hardware. On a Magnolia Park bungalow with 10-inch-deep original cabinets, refacing can’t fix the storage problem, and the savings narrow once you account for what a second fix-up costs. Call (844) 797-7958 for an exact quote – estimates are free.
Measure the interior depth first: if the boxes are under 12 inches deep, refacing is rarely worth it. Then check for moisture damage near the base and plumbing, and look at the back panel. Full-panel plywood boxes that are dry and deep enough are refacing candidates; face-frame-only boxes with soft wood are not. Groundwork Construction Co. of Burbank can walk through it in about 20 minutes and give you an honest read.
Sometimes, but not reliably on 1930s to 1950s fir or pine boxes. Modern hardware needs a minimum wood thickness and screw-pull strength that older cabinets often lack, and refacing installs new doors on hardware that can fail within a year when the box is too soft. Replacement gives you factory-bored hinge plates rated for the load, and the 730-Day Done Right Promise covers that workmanship for two years.
If you’re selling within a couple of years and your boxes are plywood and full-depth, refacing is the lower-risk spend. If you’re in one of Burbank’s older bungalows with shallow, damaged boxes, a buyer’s inspector will flag the storage and layout anyway. In that case, replacement usually returns more at sale. Call (844) 797-7958 and we’ll map the timing against your plans – estimates are free.
Sometimes it does, and you should plan for it. Burbank’s building-safety and seismic enforcement is aggressive, and unpermitted additions or converted garages behind the walls will surface when a permit is pulled. That’s a strong reason to work with a partner who plans for inspection. Our background-checked, uniformed technicians arrive expecting the surprises older homes hold.
If you’d rather have it looked at, Groundwork Construction Co. of Burbank offers a no-pressure assessment in Burbank – call (844) 797-7958 for a free estimate. We’ll tell you the honest answer on refacing before you commit a dollar to it.
Written by the team at Groundwork Construction Co. of Burbank, serving Burbank, CA.


