







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterDriveway Resurfacing vs Replacement in Burbank, CA: Which One Actually Holds Up?
Choose replacement when the sub-base under your slab is failing, and choose resurfacing only when the concrete below is sound and staying put. In Burbank, that call hinges on things you can’t see from the curb: a cracked sub-base, an unpermitted wall at the driveway edge, or a drainage problem the original slab never had to solve. A skim coat over a bad base re-cracks within two seasons, and you’ve paid twice. Call (844) 797-7958 and we’ll tell you which side of that line your driveway is on before you spend a dollar.

What Burbank’s Climate and Housing Stock Do to a Driveway
Burbank sits in a hot, dry San Fernando Valley basin. Long unshaded summers bake the surface, and Santa Ana wind events push heat and fire risk toward the Verdugo edges. Then winter rain arrives fast and runs off hard ground. That cycle of extreme heat and sudden water is what opens cracks and, more importantly, what finds every weak spot in the base beneath the slab.
The housing stock makes it trickier. Magnolia Park’s 1920s-40s Spanish Revival and Craftsman bungalows often sit on driveways poured decades ago, sometimes widened by a past owner without a permit. Rancho Equestrian properties carry their own grading quirks. In the hillside streets above the valley floor, the tightest fire-clearance and hillside grading scrutiny in the region applies. If you’re weighing resurfacing against a full tear-out, those conditions decide the answer before the price does. It’s the same reality behind everything we cover in our Driveway & Pavers work here.
How to Tell If Your Sub-Base Is Sound: The 25-30% Test
Here’s the test we run on every estimate, and you can run a version of it yourself. Walk the slab. If more than 25-30% of the surface has cracks wider than a quarter-inch, resurfacing is bonding to a structurally compromised base. Watch for any section that rocks underfoot when you step on it. That movement means the soil or aggregate below has already failed, and a 2-inch overlay will follow it down. When either sign shows up, the math on resurfacing stops working.
If the slab is mostly intact, cracks are hairline, and nothing moves, resurfacing is a real option. We put our read of sub-base condition in writing on every driveway estimate. It’s a diagnosis, not a visual guess, because a guess is what gets homeowners into the second repair.

The Burbank Permit Trigger Most Homeowners Don’t See Coming
A full driveway replacement requires a permit in Burbank. Resurfacing typically does not. That difference sounds minor until you understand what the permit pulls in with it: a site inspection. And that inspection can flag unpermitted improvements within a few feet of the driveway footprint, which are common on older Burbank lots. An unpermitted retaining wall at the driveway edge, a converted garage, a widened apron. The city can require those resolved before it signs off on the new driveway.
That’s why we raise it early. A contractor who doesn’t warn you about adjacent violations before taking your money isn’t doing you a favor, they’re handing you a surprise. You deserve to know the full scope before you choose replacement.
Hillside Drainage and Fire-Clearance on Sloped Lots
If your Burbank home sits above the valley floor, replacement usually means a drainage plan that meets current hillside grading standards. Those standards may differ from what the original slab was permitted under decades ago, so a like-for-like tear-out can trigger fresh requirements. The work has to anticipate both fire clearance and flash runoff. On a flat Magnolia Park lot this rarely comes up. On a hillside drive it’s often the deciding factor between resurfacing now and replacing correctly with a drainage plan.
How Long Does Resurfacing Actually Last in Burbank?
A properly applied 2-inch overlay on a sound base in our hot, dry valley climate typically delivers 7-10 years. Not 15-20. You’ll hear the longer number from plenty of places, and it doesn’t hold up here. Heat cycling and the occasional hard winter rain wear an overlay faster than a slab poured on a good base. Knowing that number before you pick the cheaper option is the whole point. Resurfacing can be the right call, but only when you understand the clock it’s on.
Resurfacing vs Replacement: A Side-by-Side
| What matters | Resurfacing | Full replacement |
|---|---|---|
| Burbank permit | Typically not required | Required, triggers site inspection |
| Best when | Slab sound, few wide cracks, nothing rocks | 25-30% wide cracks, movement, failed base |
| Typical lifespan here | 7-10 years | Decades, if the base is done right |
| Hillside drainage plan | Usually not | Often required on sloped lots |
| Typical Burbank cost | $250-$700 (sealing) | $5,000-$14,000 |
What It Costs in Burbank, Both Ways
Here are the real numbers we quote in Burbank, so you can compare scenarios instead of ballparks. Sealing runs $250-$700. A full driveway replacement runs $5,000-$14,000. Concrete installation runs $4,500-$12,000, and paver driveway installation runs $7,000-$18,000 if you’re considering an upgrade during the tear-out. Asphalt paving runs $3,500-$9,000. Upfront pricing means the number you see is the number you pay, and every driveway estimate covers both scenarios so you’re comparing actual figures.
- Our technicians bring up to 12 years of experience to each driveway assessment.
- When replacement is the right call, projects over $10,000 get $1,000 off.
- 0% financing for 18 months makes a full tear-out easier to budget.
- Every driveway project is backed by our 730-Day Done Right Promise.
For the broader scope of what we handle, see Driveway & Pavers in Burbank, and start from our home page to see the full range of exterior work.
FAQs
Resurfacing is cheaper up front, usually a fraction of a full replacement, but it only saves money if the base is sound. On a failed sub-base, resurfacing re-cracks within two seasons and you pay for both jobs. Call (844) 797-7958 for an exact quote with a written sub-base diagnosis. Estimates are free.
Driveway replacement in Burbank typically runs $5,000-$14,000 depending on length, base condition, and drainage needs. Hillside lots with grading requirements land toward the higher end. Call (844) 797-7958 for a firm number, with $1,000 off projects over $10,000.
Resurfacing typically does not require a permit in Burbank, while full replacement does. That replacement permit triggers a site inspection that can flag unpermitted work near the driveway, including converted garages and edge walls. Call us and we’ll walk you through what your specific lot may surface.
Yes. We diagnose sub-base condition on every estimate and put it in writing before you choose. Any section that rocks underfoot or wide cracks across 25-30% of the surface signals a failed base. Call (844) 797-7958 to schedule a no-pressure assessment in Burbank.
If you’d rather have it looked at, Groundwork Construction Co. of Burbank offers a no-pressure assessment in Burbank – call (844) 797-7958. We answer with a live person 24/7 and give you both scenarios in writing before you decide.
Written by the team at Groundwork Construction Co. of Burbank, serving Burbank, CA.


