A Groundwork company - serving Burbank, CA
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood

Backsplash, Tile & Flooring in Burbank, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Burbank
New painted shaker cabinets with an organized deep drawer
A remodeled kitchen with a waterfall island and wood cabinets
An open kitchen and dining area after a remodel
A new curved paver walkway to the front porch
A walk-in shower with large-format tile and a built-in niche
A remodeled family room with new windows and a window seat
A standing-seam metal roof over a covered porch
A new bay window with a cushioned seat
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate
Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Backsplash, Tile & Flooring in Burbank, CA

Backsplash, tile and flooring work in Burbank typically runs $1,800 to $9,500 depending on square footage, material and whether we’re replacing subfloor or setting over existing slab. That covers the three surfaces that do the most visible work in a kitchen: the splash behind the range, the counter-to-cabinet tile, and the floor underfoot. We handle all three as one continuous scope so the grout lines line up, the heights match, and you’re not coordinating two installers who blame each other when a seam is off by a quarter inch.

Groundwork Construction Co. of Burbank builds these projects under the 730-Day Done Right Promise – if it’s not done right, we make it right. That matters more for tile than for almost any other trade, because a bad tile job doesn’t announce itself on day one. It shows up eighteen months later as a hollow thud under a heel, a hairline crack running out from a corner, or grout that’s already gone dark in a shower niche. Our technicians have up to 12 years of experience, and they’re background-checked and arrive in uniform. You can reach a live person 24/7 at (844) 797-7958.

If you’re planning the whole room, start with our Kitchen Remodeling in Burbank page for the full scope, sequencing and budget picture. This page covers the surfaces specifically – what they cost, how we set them, and what goes wrong when they’re rushed.

Key Takeaways

  • Backsplash, tile and flooring in Burbank runs roughly $1,800 to $9,500 for a typical kitchen, with material choice driving most of the spread.
  • Burbank’s older housing stock – much of it built between the 1920s and 1950s – means we routinely find cracked mud-set beds, uneven framing and settled slabs under existing tile.
  • Tile failure is usually a substrate problem, not a tile problem. We check and correct the base before anything gets set.
  • Every project carries the 730-Day Done Right Promise, upfront pricing with no surprises, and 0% financing for 18 months.
  • Call (844) 797-7958 for a free project estimate and design consult.
Installers leveling a new base cabinet during a kitchen remodel

When You Need Backsplash, Tile & Flooring

Tile doesn’t fail all at once. It gives you signals first, and the homeowners who call us early usually spend less than the ones who wait for a tile to actually pop loose. Here’s what we hear most in Burbank:

  • The backsplash is dated and you’re changing counters. If new countertops are going in, the old 4-inch splash and the tile above it have to come off anyway. Burbank bungalows and ranches around Magnolia Park and the Rancho district are full of original 1950s square tile with a bullnose edge that no longer fits the room. Once the counter changes, patching the old splash looks worse than starting clean.
  • Grout lines are dark, crumbling or missing in patches. In kitchens with a lot of cooking happening – and in Burbank that’s most of them – grease and steam work into Portland cement grout over time. Crumbling grout behind the range is the first sign the original installation was thin on sealer or set over a surface that moves.
  • Floor tile is cracked in a straight line or sounds hollow. A crack that runs in a straight line across several tiles usually traces back to a control joint or a slab crack underneath. Hollow-sounding tiles mean the thin-set didn’t bond, which happens fast on a floor that wasn’t properly prepped. In the hillside homes above Glenoaks, we also see deflection issues where the joist structure flexes more than tile can tolerate.
  • Tiles are lifting or tenting at the perimeter. This is a movement problem, not an adhesive problem. Tile needs room to expand, and an installation set tight to the wall with no perimeter gap will eventually push up in the middle of the floor.
  • You’re converting carpet or vinyl to hard surface. A lot of Burbank kitchens still have sheet vinyl from a 1980s or 1990s update. Pulling it up often reveals a second layer of vinyl, sometimes a particleboard underlayment, and occasionally the original hardwood. We open it up and show you what’s actually there before quoting the final number.
  • Water damage near the sink, dishwasher or refrigerator. Slow leaks under a cabinet don’t show until the tile above them loosens or the toe kick swells. If you’ve had a supply line fail, the floor around it needs to come up regardless of how it looks.

One local detail worth stating plainly: Burbank sits in a seismic zone, and tile over a slab that has already cracked once will crack again unless the crack is handled properly. We don’t skip that step.

Our Backsplash, Tile & Flooring Process

Here’s the sequence we follow on a kitchen tile and flooring project in Burbank, start to finish.

  1. On-site measure and substrate check. We measure every wall and floor plane, then check what’s under the existing surface. On a slab, that means looking for cracks, moisture and old adhesive. On a raised floor, we check joist spacing and deflection. We bring a laser level because Burbank’s older kitchens are rarely square, and a splash that’s level at one end and running out at the other shows from across the room.
  2. Material selection with real samples in the room. We set samples against your actual cabinets and counter slab, in your actual light. Kitchen tile that looks warm in a showroom can read gray under a north-facing Burbank window. We work with tile, stone and cabinet lines that hold up to daily use, including KraftMaid cabinetry when the tile layout needs to align with new cabinet runs.
  3. Demo and substrate correction. Old tile comes out, along with old thin-set, backer and any rotten underlayment. If the slab has a crack, we address it with a proper isolation membrane rather than tiling over it. If the framing is out of plane, we correct it. This is the step that separates a tile floor that lasts from one that doesn’t, and it’s the step most bids leave out.
  4. Layout and dry-fit. Before a single tile is set, we lay out the pattern and check where the cuts land. You don’t want a sliver of tile at a doorway or a visible grout line off-center behind the range. For a herringbone or large-format floor, this is a longer conversation, and we have it before the mortar is mixed.
  5. Install with proper waterproofing. Backsplash and floor tile get the correct substrate and membrane for the location. Floors get thin-set rated for the tile size, full coverage, and back-buttering on large-format pieces. All penetrations, corners and seams are sealed before tile goes over them.
  6. Grout, seal and final walkthrough. Grout goes in after the thin-set has fully cured, not the next morning. We seal where it’s appropriate, caulk the movement joints, and walk the whole job with you. Any tile that sounds hollow or doesn’t sit flat gets replaced before we call it done. That’s the standard the 730-Day Done Right Promise is built on.

If your tile work is part of a larger room overhaul, we sequence it against the cabinet install and countertop template so nothing gets set twice. That coordination is what the home page for our full scope is talking about.

A new casement window over a kitchen sink

Backsplash, Tile & Flooring Pricing in Burbank

Pricing varies by material and by what we find under the old surface. Here’s an honest range for typical Burbank kitchen projects. The number you see is the number you pay; we don’t come back mid-job with a change order for a substrate problem we should have caught at the estimate.

Scope Typical Range What drives the cost
Backsplash only (30-50 sq ft) $1,800 – $4,200 Tile type, pattern, number of outlets and corners to cut around
Kitchen floor tile (150-250 sq ft) $2,600 – $6,800 Tile size, substrate correction, removal of old flooring
Backsplash + floor as one project $4,200 – $9,500 Combined labor, material quantity, waterproofing needs
Large-format or natural stone +25% to +40% over above Material cost, cutting, weight, special setting materials
Substrate repair (cracked slab, rotten underlayment) $400 – $1,500 Extent of damage, membrane type, square footage affected

What actually moves the number

  • Material. Ceramic is the budget end. Porcelain runs more. Natural stone, glass mosaic and hand-made tile run higher still. The tile itself is usually the smaller part of the bill; labor is the bigger piece on a straightforward install.
  • Pattern. A straight-set square grid is the fastest to install. Herringbone, chevron, offset and large-format running bond all take more layout time and more waste.
  • Substrate condition. Good slab, one layer of flooring, no cracks: straightforward. Old mud bed, cracked slab, particleboard underlayment, or three layers of vinyl: more labor, more material, more time.
  • Room complexity. Number of outlets, corners, appliance cutouts, and whether the floor runs into an adjacent room without a transition strip.

We offer a free project estimate and design consult so the range above becomes a firm number for your kitchen. There’s $1,000 off on projects over $10,000, and 0% financing for 18 months, which is worth asking about if the tile work is part of a bigger remodel. Call (844) 797-7958 and we’ll walk the room with you.

FAQs – Backsplash, Tile & Flooring

How much does kitchen backsplash and floor tile cost in Burbank?

A typical backsplash-only project runs $1,800 to $4,200, and a full kitchen floor in tile runs $2,600 to $6,800. Combined, plan on $4,200 to $9,500 for most Burbank kitchens. The spread comes down to material type, pattern complexity, and what we find under the old surface once it’s out. Call (844) 797-7958 for a firm number – estimates are free.

Can you install a backsplash and floor at the same time as a full kitchen remodel?

Yes, and it’s the better way to do it. When the tile goes in as part of a coordinated Kitchen Remodeling scope, we sequence it after cabinet install and before counter template so the surfaces meet cleanly and nothing gets redone. Doing tile later as a separate job means patching around finished work, which rarely looks right.

How long does a backsplash and floor tile job take in Burbank?

A backsplash alone is usually two to three days of install plus a day of grout and finishing. A kitchen floor runs three to five days depending on square footage and substrate work, and the floor needs to be out of use while thin-set and grout cure. Combined projects generally run about a week. We schedule around your kitchen so you’re not without a cooking space longer than necessary.

Do I need to remove the old tile first, or can you tile over it?

In most cases we remove it. Tiling over an existing surface only works if the old tile is fully bonded, flat, and the added height won’t create a problem at doorways and cabinet toe kicks. For a backsplash, tiling over old tile adds thickness at the counter line that looks wrong. For floors, an old layer hides problems we need to see. We look at it on site and tell you straight which way is right for your kitchen – call (844) 797-7958 and we’ll take a look.

What tile holds up best in a Burbank kitchen?

Porcelain is the practical choice for floors: dense, water-resistant, and it handles the everyday traffic of a busy kitchen. For backsplashes, ceramic and porcelain are both fine and easy to clean, and glass or mosaic adds depth behind the range if that’s the look you want. We bring samples in your light so you can see the difference before committing.

Do you handle the cabinets, counters and flooring together?

We can, and it’s usually the cleaner path. A kitchen’s tile, cabinet and counter work all reference each other for height and line, so running them under one scope removes the finger-pointing. We work with KraftMaid and Wellborn cabinetry and coordinate the whole sequence with you. Call (844) 797-7958 for a free estimate and design consult on the full room.

If you’re also thinking about exterior work while the kitchen is torn up, our team handles whole-home construction under the same 730-Day Done Right Promise, and brand partners like James Hardie and Tuff Shed come up regularly on those projects.

Set the Surfaces Right the First Time

Tile is one of the few finishes in a kitchen where the quality of the work under the surface matters as much as what you see. We check the slab, correct the framing, waterproof the wet areas, and set the layout before the first tile goes down – because a tile floor that fails in year two costs you twice. The 730-Day Done Right Promise covers that work in writing, and a live person answers the phone 24/7 whenever you need us.

Call (844) 797-7958 for a free project estimate and design consult on your Burbank backsplash, tile and flooring project. We’ll walk the room, show you real material options, and give you an upfront price with no surprises.

Written by the team at Groundwork Construction Co. of Burbank, serving Burbank.

Getting started with Groundwork in Burbank

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Burbank team

A local vetted partner works across Burbank and the towns around it, to the same written standard as every Groundwork job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Burbank? Licensed & insured · free written estimates
Call (844) 797-7958
Local Service Coverage

Request a Free Estimate in Burbank

Tell us what you need - Groundwork Construction Co. of Burbank responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch