A Groundwork company - serving Burbank, CA
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood

Cabinet Refacing vs Replacement in Burbank, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Burbank
New painted shaker cabinets with an organized deep drawer
A remodeled kitchen with a waterfall island and wood cabinets
An open kitchen and dining area after a remodel
A remodeled hall bathroom with patterned floor tile and painted walls
A wood double vanity with two mirrors after a bathroom remodel
A finished backyard cottage with a small covered porch
A new roof with clean valleys and new flashing
A new multi-panel patio door opening a kitchen to the patio
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate
Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Cabinet Refacing vs Replacement in Burbank, CA: Choose Replacement Unless Your Boxes Are Worth Saving

Choose cabinet replacement over refacing for most pre-1950 Burbank kitchens, because the original boxes are usually too shallow, too soft, or too water-damaged to carry modern hardware. Choose refacing only when your cabinet boxes are solid plywood, at least 12 inches deep, and you plan to stay put for fewer than five years. Cabinet refacing vs replacement isn’t a style debate in Burbank. It’s a question about what’s underneath the doors. Call Groundwork Construction Co. of Burbank at (844) 797-7958 for a free assessment and a straight answer on which path your kitchen needs.

Cabinet refacing makes financial sense when the boxes underneath are worth $4,000. In a 1940s Burbank bungalow with 10-inch-deep original cabinets and no corner solutions, those boxes are often worth zero.

Installers leveling a new base cabinet during a kitchen remodel

Why Burbank’s Housing Stock Changes the Math

Burbank sits in a hot, dry San Fernando Valley basin, and its housing runs from 1920s-40s Spanish Revival and Craftsman bungalows in Magnolia Park to 1950s-60s ranch tract homes in the hills. That older single-family stock is where refacing quotes go sideways. The Magnolia Park bungalows in particular routinely hide unpermitted additions and converted garages that surface the moment a remodel pulls a permit, and kitchens in those homes were built decades before anyone owned a 36-inch refrigerator or a pull-out trash drawer.

We also work in studio-adjacent homes where residents need permit-ready, camera-friendly results on tight turnaround. The city’s aggressive building-safety and seismic enforcement adds a layer most neighboring cities don’t have, so any cabinet work that touches walls, plumbing, or electrical has to be planned around inspection.

What we find under the doors in these homes is consistent across dozens of kitchens:

  • Cabinet boxes 10 to 11 inches deep instead of the modern 12-inch minimum
  • Fir or pine face frames with thin back panels or none at all
  • Water damage and soft wood at the base, from original plumbing that has dripped for decades
  • No corner solutions, no drawer banks, and shelving sized for dishes that no longer exist

What to Look For Before You Refacing Anyone’s Quote

A new front yard fence with a matching gate

Is the Box Underneath Worth $4,000?

Run this test before you sign a refacing contract. If any answer lands in the “no” column, refacing is applying good money to a compromised structure.

Check Refacing works if… Replace instead if…
Cabinet depth 12 inches or deeper Under 12 inches (common in pre-war Burbank)
Box material Plywood construction, full back panel Face-frame only, thin or missing back
Water damage Dry, sound wood at the base Soft, stained, or swelling board near plumbing
Hardware load Wood holds screws under torque Original fir or pine strips under soft-close hinges
Layout function Modern appliances and storage fit You need pull-outs, drawer banks, or corner access
Years staying Fewer than five Long-term, or resale in a hot market

The depth number is the one people skip. If your boxes are 10 inches deep, refacing them gives you beautiful new doors on a cabinet that still won’t hold a dinner plate at full depth. The storage problem stays. You’ve just paid to hide it.

Why Modern Hardware Fails on 1940s Cabinet Boxes

Soft-close hinges and full-extension drawer slides need a minimum wood thickness and screw-pull strength that 1930s to 1950s fir and pine don’t always deliver. The wood has dried for 80 years, the grain has stiffened, and the screw holes have already been reused once or twice. We’ve seen refaced cabinets where a drawer slide pulls loose within a year because the box was never built for the torque a loaded 100-pound drawer puts on it.

Replacement solves this at the source. New boxes mean factory-bored hinge plates, solid drawer-bottom construction, and hardware rated for the load. That’s part of why we back replacement work with the 730-Day Done Right Promise. If a hinge fails, a box separates, or a drawer slide breaks, we make it right. That two-year workmanship coverage changes the ROI math on replacement in a way most refacing quotes never mention, because refacing warranties typically stop at the door finish.

Our technicians have up to 12 years of experience reading what a cabinet box will and won’t hold, and that read is the whole decision.

When Refacing Is the Right Call

There’s a legitimate refacing case, and we’ll tell you when it’s yours. A home less than 20 years old, plywood boxes at proper depth, and a homeowner staying put fewer than five years: refacing with KraftMaid door profiles is a cost-effective, low-disruption choice. The doors and drawer fronts go on quality carcasses, the finish is factory-grade, and you skip the demolition and the permit cycle. The brand partners we work with mean you’re choosing door profiles and finishes from a real catalog, not picking from whatever the last truck carried.

For a full reconfiguration, including pull-out shelves, drawer banks, corner solutions, and new appliance clearances, you’re looking at the broader work covered on our Kitchen Remodeling page rather than a refacing job. The same logic applies to our Kitchen Remodeling in Burbank work, and to the home improvements that tie into it.

What Does Refacing vs Replacement Cost in Burbank?

Cabinet installation in Burbank typically runs $4,000-$13,000 as a standalone line item, and a full kitchen remodel here ranges from $14,000 to $45,000. Refacing usually lands in the lower part of that cabinet band; replacement with new boxes, hardware, and finish lands at the upper end or above. Here’s how a cabinet project pencils out:

Line item Burbank range
Cabinet installation (standalone) $4,000-$13,000
Countertop installation $2,000-$6,500
Backsplash installation $800-$2,500
Kitchen island installation $3,000-$10,000
Full kitchen remodel $14,000-$45,000
Small kitchen remodel $9,000-$20,000

Two standing offers take the sting out of the bigger number. We run upfront pricing so the number you see is the number you pay, and we offer 0% financing for 18 months plus $1,000 off projects over $10,000. That’s what makes a full replacement budget feel different from a refacing quote that grows once the install reveals a soft base. Calls are answered by a live person 24/7, so you’re not waiting until Monday to ask.

Other work around the kitchen often comes up in the same conversation, including home additions and bathroom remodeling. Cabinet placement can affect your window replacement layout, your hardware choices, and your flooring schedule. It’s worth planning the cabinet decision with those trades in view.

Frequently Asked Questions

Getting started with Groundwork in Burbank

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Burbank team

A local vetted partner works across Burbank and the towns around it, to the same written standard as every Groundwork job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Burbank? Licensed & insured · free written estimates
Call (844) 797-7958
Local Service Coverage

Request a Free Estimate in Burbank

Tell us what you need - Groundwork Construction Co. of Burbank responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch