







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterConcrete Driveway Cost in Burbank, CA: What You’ll Actually Pay
Concrete driveway cost in Burbank runs $4,500 to $12,000 for a typical residential pour, with most homeowners landing around $9,000 for a two-car driveway. That works out to $11 to $14 per square foot once you account for Burbank’s clay soils, hillside grading, and summer heat windows. A 400-square-foot driveway that runs $8 per square foot in Phoenix costs more here, and the gap is soil, slope, and cure time, not contractor markup. Call (844) 797-7958 for a free estimate with upfront pricing that includes permits, subbase prep, and standard 4-inch pour with rebar.

Why Burbank Driveway Pricing Runs Higher Than National Averages
Most online cost guides price for sandy or stable loam subgrade. Burbank doesn’t sit on that. The valley floor here carries clay-heavy soils with moderate expansive potential, which means a driveway poured on a thin base over Burbank dirt will crack within 18 months, often sooner. The fix isn’t optional. It’s a compacted Class II base at proper depth, and that line item adds real dollars to any honest bid.
Then there’s the slope. Above the valley floor, in the Verdugo foothills and along streets like Sunset Canyon, driveways are cut into graded hillsides. Before concrete goes down, the city requires a grading permit and an engineered drainage plan, and you can’t skip the engineered fill-and-compaction step. That typically adds $1,500 to $3,500 to a project that a flat-lot quote would never include.
And the heat. Burbank summers regularly push past 100°F, which compresses the finishing window on any pour. Crews who know the local climate schedule early-morning placements and adjust mix design for cure. Out-of-area contractors who don’t know the heat cycle risk surface scaling, plastic shrinkage cracks, and a slab that looks fine in August and tired by the next spring. That’s a labor-cost variable, not a materials one, and it’s baked into every quote we write.
How Burbank’s Housing Stock Shapes the Quote
A surprising number of Burbank driveway projects start with a surprise. The 1920s to 1940s bungalows in Magnolia Park and the Rancho Equestrian area frequently hide converted garages, unpermitted additions, and old flatwork that was never properly removed. When a permit gets pulled, the history surfaces. We build a demolition and haul-off allowance into the estimate up front so the invoice doesn’t move, and we walk you through what the city will require if the old driveway footprint doesn’t match the record.
What’s Included in Our Burbank Driveway Pricing
The number you see is the number you pay. That means the following are all part of the standard spec, not add-on line items buried in change orders:
- Permit filing and inspections. Including Burbank grading permits where the property requires one.
- Demolition and haul-off of the existing slab or surface, with disposal included.
- Subbase prep and compaction to the engineered depth Burbank soils demand. No corner-cutting on base material.
- Minimum 4-inch pour with #3 rebar on a 24-inch grid. That’s the spec, not an upgrade.
- Control joints, finishing, and cure management timed to the summer heat window.
- Cleanup and final walkthrough. The job isn’t done until you’ve looked at it with us.
Every slab is covered by our 730-Day Done Right Promise. If workmanship-related cracking or heaving shows up in the first two years, we make it right. Most concrete-only contractors won’t put that in writing. We do. See our full scope on the Driveway & Pavers service page.

Concrete Driveway Cost Ranges in Burbank
| Line Item | Typical Cost Range |
|---|---|
| Concrete driveway installation (standard flat lot) | $4,500 - $12,000 |
| Driveway replacement (demo + new pour) | $5,000 - $14,000 |
| Paver driveway installation | $7,000 - $18,000 |
| Asphalt driveway paving | $3,500 - $9,000 |
| Driveway sealing (maintenance) | $250 - $700 |
| Hillside grading permit + engineered fill (add-on) | $1,500 - $3,500 |
Concrete usually costs less up front than pavers but more than asphalt. If longevity and low maintenance matter most, concrete wins. If you want the driveway to match Belgard or Unilock hardscape on the rest of the property, pavers are worth pricing side by side. We’ll quote both without pressure.
Common Burbank Driveway Scenarios
The Magnolia Park bungalow with a tired 1960s slab. Original concrete, hairline cracks, a few settled corners. Most of these we replace outright rather than overlay, because the old base is often only 2 inches of decomposed granite. We demo, haul, rebuild the base, and pour. Budget the mid-range of $5,000 to $14,000. Financing at 0% for 18 months covers most of it.
The hillside driveway in the Verdugo foothills. Steep grade, tight fire-clearance scrutiny, and a drainage plan the city will review before the first truck arrives. The permit and engineered compaction work are why this scenario typically lands $1,500 to $3,500 above a comparable flat-lot pour. It’s also why we won’t quote from a satellite photo.
The Rancho Equestrian property with a converted garage. Sounds minor. It isn’t. When the driveway permit pulls records and the old conversion surfaces, the scope changes. We flag this during the walkthrough so there are no mid-job surprises.
The studio-adjacent short-turnaround project. Burbank runs on a soundstage economy, and a few of our driveway jobs are tied to tightly scheduled remodels where the crew needs the driveway finished before a deadline. Single-visit completion is the norm for standard flat pours. That’s worth confirming on the call.
Red Flags That Inflate Bids Later
When a quote comes in dramatically below the range above, ask what’s missing. Usually it’s permit filing, base compaction depth, or disposal. Ask specifically whether the price includes a minimum 4-inch pour with rebar on a 24-inch grid, and whether the warranty is in writing for at least two years. Burbank’s clay is unforgiving, and a slab poured on the cheap will show you why by year two. For the aesthetics side of the project, we also work with Driveway & Pavers in Burbank as a design reference.
FAQs
A typical residential concrete driveway in Burbank costs $4,500 to $12,000, or roughly $11 to $14 per square foot. Hillside properties in the Verdugo foothills add $1,500 to $3,500 for grading permits and engineered fill. Call (844) 797-7958 for a free estimate specific to your property.
Yes, concrete is generally less expensive up front. Concrete installation runs $4,500 to $12,000, while paver driveways run $7,000 to $18,000. Concrete also needs less long-term maintenance. Pavers offer better crack tolerance on shifting hillside soil. Call (844) 797-7958 and we’ll price both.
A properly poured driveway with a compacted Class II base and rebar reinforcement should last 25 to 30 years in Burbank. The failure mode here is poor subbase over expansive clay, not the concrete itself. Call (844) 797-7958 to discuss the spec we use.
Yes, with early-morning placements and heat-adjusted mixes. Burbank’s 100°F+ summer days compress the finishing window, so experienced crews schedule pours for dawn and manage cure carefully. Call (844) 797-7958 and we’ll schedule around the heat.
Yes. Permit filing is included in every quote, including Burbank grading permits for hillside properties. That means the price we quote covers the paperwork, not just the pour. Call (844) 797-7958 to start the estimate.
If you’re ready for a real number instead of a range, call Groundwork Construction Co. of Burbank at (844) 797-7958. We answer live, 24/7. Free estimate, upfront pricing, and the 730-Day Done Right Promise in writing. $1,000 off projects over $10,000, with 0% financing for 18 months available.
Written by the team at Groundwork Construction Co. of Burbank, serving Burbank, CA.
What Our Customers Say
"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."
- Angela Wong"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."
- Laura Bennett"Quality work and honest pricing. He is stretched across a few jobs at once so he is not always on site, though the carpenter who was there knew everything."
- Whitney Norris












