







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterIron Fence in Burbank, CA
An iron fence in Burbank typically costs between $3,200 and $9,500 installed, depending on linear footage, iron style, gate count and whether you choose true wrought iron or a welded steel build finished to look like it. Most residential front-yard runs of 60 to 100 feet land in the $4,000 to $7,000 range. Iron is the fence you choose when you want security and curb appeal in one piece of work – it’s the only common fence material that stops a person as well as it frames a yard.
We install iron fences across Burbank because the city asks more of a fence than most places do. Lots here are tight, hillside properties in the Verdugo foothills need custom sections, and a fence line that runs along a public sidewalk has to clear code for height and setbacks before a single post goes in the ground. Groundwork Construction Co. of Burbank handles the survey, the permitting questions and the install as one job, so you’re not the one chasing answers between a fabricator and a contractor. Call us at (844) 797-7958 and we’ll walk your property line with you. For the full range of materials we work with, see our fence installation service, where iron sits alongside wood, vinyl and composite options.
Iron work is exacting. Posts have to be set to a true line, welds have to hold their finish, and gates have to swing on a hinge that won’t sag in five years. Our technicians bring up to 12 years of fence and gate experience to the job, and every iron fence we install is covered by our 730-Day Done Right Promise. If a weld fails or a gate drops out of alignment inside that window, we make it right. That’s the whole point of a written guarantee on a material you expect to outlive your mortgage.
Key Takeaways
- Iron fence installation in Burbank runs roughly $3,200 to $9,500 for most residential jobs, with true wrought iron at the high end.
- We handle height and setback questions for fences along public sidewalks before install, not after.
- In the Verdugo foothills, custom sections are common because lots and grades rarely run square.
- Every job is backed by our 730-Day Done Right Promise and upfront pricing, so the number you approve is the number you pay.
- A live person answers our phone 24/7 – call (844) 797-7958 for a free estimate.

When You Need Iron Fence
Homeowners call us for iron in a handful of predictable situations. If any of these sound like your yard, iron is worth pricing before you commit to wood or vinyl.
- You want a front boundary that actually deters. Wood and vinyl look neat but a determined person can push through or climb them. Iron is steel set in concrete footings, and the sightline through the bars means anyone near your property knows they’re visible. On a busy corner lot near Downtown Burbank, that visibility matters more than privacy does.
- You have a pool, a slope, or an ADU in the backyard. Burbank has thousands of properties with pools and a growing number with permitted accessory units. Iron gives you a code-friendly barrier that reads as intentional design rather than a temporary safety fence. It also holds up to constant sun and dry heat without the fading and cracking that hit other materials.
- Your old fence is leaning or rusting out. In Rancho Equestrian and parts of Magnolia Park, we regularly see 20-year-old iron fence lines where the posts have heaved or the paint has failed down to bare metal. A repair sometimes makes sense. Often the footings were undersized to begin with, and replacement is the smarter spend.
- You’re matching an existing iron gate or railing. Plenty of Burbank homes from the 1920s through the 1950s have original iron porch railings or driveway gates. We can match profile and color closely so a new run doesn’t look bolted on to an older house.
- You need a driveway gate that works. A swinging iron driveway gate needs heavier posts and a different footing depth than a fence line. If you’re adding a gate for security or parking control, iron is the material that carries the weight without sagging over time.
- You live on a hillside lot with a grade change. Iron sections can be racked to follow a slope, and custom fabrication handles the odd angles that hillside properties in the Verdugo foothills always produce. Wood fences on a steep grade end up with gaps at the bottom that defeat the point.
Our Iron Fence Process
An iron fence done properly is a sequence, not a one-day install. Here’s how we run the job from the first call to the final walkthrough.
- Free estimate and on-site measure. We walk the property line with you, measure linear footage, note gates and corners, and check grade. We also flag anything that affects code – fence height near a sidewalk, setbacks, easements, and whether your property line sits where you think it does. You get an upfront price before any work is scheduled. No-hassle upfront pricing means the number you see is the number you pay.
- Material and style selection. We walk you through true wrought iron versus welded steel with an iron-look finish, panel versus custom fabrication, and finish options that hold up in Burbank’s sun and dry summers. Our curated brand partners carry across every trade we work in, from KraftMaid cabinetry to GAF roofing, and the same standard applies to the fence materials we specify. You choose quality, not just what’s in stock.
- Permit and code check. Burbank has rules on fence height and placement, and a front-yard fence near a public sidewalk or corner has to be checked before install. We handle those questions for you so your fence doesn’t get flagged after the fact.
- Layout and footing prep. We mark the line, confirm corners and gate posts, and dig footings to the right depth and diameter for iron. This is where cheap installs fail – undersized footings on a heavy iron post will heave or lean within a few seasons. It’s the least glamorous part of the job and the one that decides whether the fence stays true.
- Install and fabrication. Posts get set and plumbed, sections get mounted, and any custom pieces for slope changes or odd angles get fit on site. Gates get hung and adjusted so the swing is clean and the latch lines up without a fight. Background-checked, uniformed technicians handle the entire install.
- Finish, cleanup, and walkthrough. We touch up welds and finish, clear the site, and walk the finished fence with you. You get the 730-Day Done Right Promise in writing, and a live person is still on the other end of the phone if anything comes up.
If your project includes a gate that ties into a driveway or a new hardscape, we can coordinate that scope under one contractor rather than stitching together separate trades. From foundation to finish line, the goal is that you make one call and one set of decisions.

Iron Fence Pricing in Burbank
Iron fence pricing in Burbank depends on linear footage, material (true wrought iron costs more than welded steel), gate count, footing requirements and whether the fence line runs on flat ground or a grade. Here are honest ranges for a typical residential job.
| What you’re paying for | Typical range |
|---|---|
| Welded steel iron-look fence, installed (per linear foot) | $45 – $75 |
| True wrought iron, installed (per linear foot) | $70 – $120 |
| Walk gate, installed | $450 – $1,200 |
| Driveway gate, installed | $1,800 – $5,500 |
| Footing prep and setting (per post) | $40 – $90 |
| Custom fabrication for slope or odd angles | $300 – $1,500 added |
| Full front-yard run, 60 – 100 linear feet | $4,000 – $7,000 |
Several things move that number. Hillside lots in the Verdugo foothills often need custom sections, which adds fabrication time. A fence along a public sidewalk may need a permit, and that carries its own cost. Heavier driveway gates need deeper footings and stouter posts. And rust remediation on an existing fence line – sanding, priming and repainting – adds labor before any new material goes in.
We don’t quote from a phone photo and hope it holds. The free on-site estimate is where the real number comes from. And to keep a larger project manageable, we offer 0% financing for 18 months plus $1,000 off projects over $10,000. Built to last, backed in writing – call (844) 797-7958 for your free estimate and we’ll price your run exactly.
FAQs – Iron Fence
How much does an iron fence cost in Burbank?
Most residential iron fence installations in Burbank run between $3,200 and $9,500, with a typical 60- to 100-foot front-yard run landing near $4,000 to $7,000. Welded steel runs roughly $45 to $75 per linear foot, while true wrought iron runs $70 to $120 per linear foot. Gates, custom fabrication for slope, and permit costs push the total higher. Call (844) 797-7958 for an exact quote – estimates are free.
Can you install an iron fence on a hillside or sloped lot?
Yes. Iron is one of the better materials for sloped lots because sections can be racked to follow the grade and custom fabrication handles the odd angles that hillside properties produce. In the Verdugo foothills we regularly build custom panels for exactly this reason. Steeper grades mean more fabrication and slightly higher cost, but the fence sits flush instead of leaving gaps at the bottom.
Do I need a permit for an iron fence in Burbank?
It depends on where the fence sits and how tall it is. Fences along a public sidewalk or on a corner lot often trigger a permit and height review, and Burbank has setback and height rules that apply. We check those requirements before install as part of the job, so you’re not the one sorting it out. Call (844) 797-7958 and we’ll tell you what your specific property needs.
How long does iron fence installation take?
A straightforward front-yard run of 60 to 100 feet is usually a two- to four-day job once materials are on site and footings are set, though custom fabrication and driveway gates can stretch that. Hillside lots and permit reviews add time. We give you a realistic schedule at the estimate, not an optimistic one.
Is iron fence repair cheaper than replacement?
Sometimes. If the posts and footings are sound and only the finish or a weld has failed, repair is the cheaper path and we’ll tell you so. But when footings were undersized or posts have heaved, patching a rusting line just buys a couple of years. We’ll show you which situation you’re in before you spend anything. Call (844) 797-7958 – estimates are free and honest.
An iron fence is a long-horizon decision, and it deserves a crew that treats the footings as seriously as the finish. Groundwork Construction Co. of Burbank brings the 730-Day Done Right Promise, upfront pricing that doesn’t move, background-checked uniformed technicians, and a live person on the phone 24/7 – never a voicemail black hole. If you’re ready to protect the property and lift the curb appeal in one job, call (844) 797-7958 for a free estimate and design consult. Start with our home page to see the full scope of what we build, or check our Fence Installation in Burbank page for the materials we work with.
Written by the team at Groundwork Construction Co. of Burbank, serving Burbank.


