







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterMetal Roofing in Burbank, CA
Metal roofing in Burbank typically costs $12,000 to $28,000 for a full residential roof replacement, depending on square footage, panel type, and how much of the old roof has to come off first. Most Burbank homes we work on fall in the $18,000 to $24,000 range for a standing-seam or stone-coated steel install over a single-story ranch or a 1920s bungalow near Magnolia Park. Metal is the roof of choice here for a reason: it handles the San Fernando Valley heat, sheds the rare but heavy winter rain, and outlasts asphalt by decades.
Groundwork Construction Co. of Burbank installs metal roofs as part of our Roofing line, which means you get the same crew standards on a metal job that you’d get on a shingle tear-off or a full remodel. We’re a full-scope construction partner, not a roofing-only outfit, so if the fascia underneath is rotten or the decking needs repair, we handle it without farming it out to a second contractor. Call (844) 797-7958 and a live person picks up, day or night.
Our technicians have up to 12 years of experience, and every job lands under our 730-Day Done Right Promise – if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction, and it covers the labor on every metal roof we put up.
Key Takeaways
- Metal roofing in Burbank runs roughly $12,000 to $28,000 for most homes, with standing-seam at the higher end and stone-coated steel at the lower.
- Metal outperforms asphalt in Burbank’s heat because it reflects solar gain instead of baking it into the attic.
- We handle decking, fascia, and flashing repairs in-house, so you’re not chasing a second trade.
- Every install is covered by the 730-Day Done Right Promise, and calls are answered by a live person 24/7.
- Free estimates include an on-site roof inspection and a written, upfront price with no surprises.

When You Need Metal Roofing
Metal isn’t the right answer for every Burbank roof, but there are clear signals that it’s time to talk about it. Here’s what we see on the homes we visit across the city.
- Your asphalt roof is on its second or third layer and the heat is winning. In Burbank, a shingle roof takes a beating. Summer attic temps push past 140 degrees on a west-facing slope, and a 15-year-old asphalt roof that would last 25 years in a cooler climate often starts curling and granule-shedding by year 12. If you’re looking at a third tear-off, switching to metal ends the cycle.
- You’re tired of patching leaks above a flat or low-slope section. Lots of Burbank homes near the Rancho Equestrian District and along the foothills have additions with low-slope tie-ins where shingles fail. Standing-seam metal with proper underlayment is far more reliable on those transitions.
- You’ve added solar and want a roof that outlives the panels. Pulling solar to re-roof in 15 years is expensive. Installing metal first means the array stays put for the life of the system.
- You’re in a high-fire-severity zone toward the Verdugo Mountains. Metal roofing carries a Class A fire rating and won’t catch embers the way wood shake or aged shingles can. That matters for insurance in parts of Burbank.
- You want the attic cooler and the energy bill lower. A reflective metal roof with a proper air gap cuts attic heat gain noticeably. Burbank summers are the test case.
- You’re planning to stay in the house. Metal lasts 40 to 70 years depending on the product. If this is your long roof, it’s the one you buy last.
If any of that sounds familiar and you’re in the Burbank service area, we’ll come look. Free estimates, no pressure to sign anything on the spot.
Our Metal Roofing Process
Metal roofing fails for two reasons: bad underlayment and rushed flashing. Our process is built around getting both right. Here’s what the job looks like from start to finish.
- On-site inspection and written estimate. We walk the roof, measure the pitch and square footage, check the decking and fascia, and identify every penetration and valley. You get an upfront price in writing. The number you see is the number you pay.
- Material selection with brand partners. We work through a curated set of manufacturers so you’re choosing on quality, not just what’s in stock. We’ll show you panel profiles, finishes, and warranty terms, and connect the right exterior product with the rest of the home – the same way we’d pair James Hardie siding with a metal roof so the colors and trim line up cleanly.
- Tear-off and deck repair. The old roof comes off, the decking gets inspected board by board, and any rot or soft spots get replaced before a single panel goes down. This is where a lot of cheap metal bids get exposed.
- Underlayment and flashing. High-temp synthetic underlayment goes over the deck. Every valley, chimney, vent, and wall tie-in gets flashed with metal, not caulk. On Burbank homes with steep pitches and complex rooflines, this step takes the longest and matters most.
- Panel installation. Panels get fastened according to the manufacturer’s spec with concealed or exposed fasteners depending on the profile. Ridge caps, eave trim, and closures finish the edges so wind and water can’t get under the field.
- Final walkthrough and written guarantee. We walk the roof with you, clean the site, and hand over documentation. Every install is covered by the 730-Day Done Right Promise, built to last and backed in writing.
Most residential metal roofs are completed in one to three days once the materials are on site, depending on square footage and how many tie-ins the roof has.

Metal Roofing Pricing in Burbank
We don’t do mystery pricing. Here are the honest ranges for metal roofing in Burbank, along with the factors that move the number.
| Line item | Typical range |
|---|---|
| Stone-coated steel, full tear-off and install (1,800-2,400 sq ft) | $12,000 – $19,000 |
| Standing-seam steel, full tear-off and install (1,800-2,400 sq ft) | $18,000 – $28,000 |
| Corrugated or exposed-fastener metal panel | $9,000 – $15,000 |
| Decking or fascia repair (per section) | $300 – $1,200 |
| Removal of a second layer of old roofing | $1,500 – $3,500 |
| Complex tie-ins, valleys, or dormers | $800 – $2,500 |
What pushes a Burbank job toward the top of that range: steep or cut-up rooflines common in the hillside homes above Glenoaks, multiple valley tie-ins, older decks that need repair, or premium finishes and colors. What pulls it down: a simple gable roof, a single-story footprint, and straightforward access.
We offer a free project estimate and design consult, plus $1,000 off projects over $10,000 and 0% financing for 18 months. A metal roof is a significant spend, and we’d rather make it accessible than talk you into a cheaper product you’ll replace in 15 years. Call (844) 797-7958 for an exact number. Estimates are free.
FAQs – Metal Roofing
How much does metal roofing cost in Burbank?
Metal roofing in Burbank costs roughly $12,000 to $28,000 for a full residential replacement, with standard standing-seam running $18,000 to $28,000 and stone-coated steel closer to $12,000 to $19,000. The biggest variables are roof square footage, panel type, and how much decking repair the old roof hides. Call (844) 797-7958 for an exact quote – estimates are free.
Is metal roofing worth it in Burbank’s heat?
Yes, especially on west- and south-facing slopes. Metal reflects solar gain instead of absorbing it into the attic, so attic temperatures run lower during the summer. Combined with the 40-to-70-year lifespan of most metal products, the cost per year of service lands well below repeated asphalt replacements. We’ll tell you honestly if a metal roof makes sense for your specific house or if a different product is the smarter spend.
Can metal roofing be installed over my existing roof?
Sometimes, but we usually recommend a full tear-off. Installing metal over old shingles traps moisture and hides decking problems you’d want to fix anyway. If the existing roof is a single sound layer, we’ll discuss the options honestly and quote both, but a clean tear-off gives you the best result and the most reliable warranty coverage. Call (844) 797-7958 and we’ll walk your roof and tell you which path fits.
How long does metal roofing last in Burbank?
A properly installed metal roof typically lasts 40 to 70 years here, depending on the product and finish. Burbank’s sun is hard on paint finishes, so we recommend specifying a finish rated for high UV exposure and checking the manufacturer’s warranty on the coating itself. Installation quality matters just as much – underlayment and flashing failures end more metal roofs early than panel corrosion does – which is why every job lands under our 730-Day Done Right Promise.
If you’re ready to stop patching and think about the roof you’ll only buy once, we’ll come out, inspect, and give you a straight number. Live person, 24/7, at (844) 797-7958.
Written by the team at Groundwork Construction Co. of Burbank, serving Burbank.


