







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterSliding & Patio Doors in Burbank, CA
Sliding and patio door replacement in Burbank typically runs $1,800 to $6,500 per opening installed, depending on frame material, glass package, and whether the existing rough opening needs adjustment. We handle the whole job: measuring the opening, ordering the door, pulling permits where Burbank requires them, and installing it so the track glides and the lock lines up the first time. If your current slider sticks, fogs, or lets the afternoon heat pour in, call (844) 797-7958 and we’ll set up a free estimate.
Sliding doors take a beating here in a way they don’t in most of the country. Burbank sits in a basin where summer temperatures push past 100°F and the afternoon sun hits west-facing patios hard for hours. That cycle of expansion and contraction works on door frames and tracks year after year. Add the Santa Ana wind events that drive grit and dust into every roller channel, and a door that was fine five years ago starts dragging. We see it constantly in the older ranch homes off Magnolia Park and the mid-century builds up near McCambridge Park. Replacing that door right is one of the highest-return upgrades on a Burbank house, both for energy bills and for how the back of the home actually feels to live in. This page covers the sliding and patio door side of our Windows & Doors work, and you can see everything we do across the city on our Burbank service area page.
Key Takeaways
- Sliding and patio door replacement in Burbank runs roughly $1,800 to $6,500 installed, with most standard sliders landing in the $2,400 to $4,200 range.
- Heat, dust, and wind are the three things that kill sliding doors in Burbank, and the right glass package and track hardware address all three.
- Every job we do is covered by our 730-Day Done Right Promise, so if the door doesn’t glide or seal the way it should, we make it right.
- We answer the phone live, 24/7, and offer 0% financing for 18 months plus $1,000 off projects over $10,000.

When You Need Sliding & Patio Doors
Most homeowners call us when a door has crossed from “annoying” to “I can’t ignore this anymore.” Here are the situations we run into most often in Burbank.
- The door drags or jumps the track. If you have to lift the panel to slide it, the rollers are shot or the track is bent. Rollers are a wear item, and in Burbank’s dust they wear faster than the manufacturer expects. Once the frame starts flexing from the drag, replacement usually costs less than repeated repairs.
- You can feel the heat coming through the glass. A single-pane slider on a west-facing wall turns your living room into an oven by 3 p.m. in July. Dual-pane low-E glass with argon fill cuts that solar gain dramatically and keeps the room usable without the AC running all afternoon.
- Condensation between the panes. Foggy glass means the seal has failed. You can’t fix that; the insulated unit has to be replaced, and at that point a new door is often the smarter spend than rebuilding an old frame around fresh glass.
- The lock doesn’t catch or the door won’t close flush. A slider that doesn’t latch is a security problem, not just a draft. Settlement and track wear both cause it, and both get worse with time.
- You’re remodeling the kitchen or adding a patio. Opening up a wall to a new paver patio or deck means specifying a door that matches the new opening and meets egress and safety-glazing requirements. We coordinate that with the rest of the project so the door isn’t an afterthought.
- You want a multi-panel or folding door. Big opening systems that stack or fold away are increasingly popular on Burbank homes with a good back yard. They need a properly framed, properly supported header, which is exactly the kind of structural work we handle in-house.
Our Sliding & Patio Doors Process
We keep the process tight so you know what’s happening at every stage. Here’s how a sliding or patio door project runs with us.
- Free in-home estimate and measurement. We come out, look at the existing opening, check the header and framing, and talk through what you want the door to do. You get upfront pricing on the spot; the number you see is the number you pay.
- Material and glass selection. We walk you through frame options (vinyl, fiberglass, wood-clad) and glass packages suited to Burbank’s sun load. We work with trusted manufacturers like Andersen and Marvin for windows and doors, and where a project touches siding around the opening, James Hardie products hold up well against the local heat and sun. You choose quality, not just whatever’s in stock.
- Permits and code check. Burbank requires permits for most door replacements that alter the opening or structure, and bedroom-adjacent patio doors have egress and safety-glazing rules. We handle the paperwork and make sure the install meets current code.
- Order and scheduling. Custom sizes and specialty glass take longer than stock units, and we give you a realistic timeline up front rather than an optimistic one we can’t hit.
- Installation day. Our background-checked, uniformed technicians remove the old door, prep and square the opening, set the new unit, flash and seal it against water intrusion, and tune the rollers and lock. Most standard replacements are completed in a single visit.
- Final walkthrough. We slide the door with you, check the seal, test the lock, and clean up. Then the 730-Day Done Right Promise goes to work: if anything isn’t right, we come back and fix it.
If you’re weighing a sliding door against a different style, or the door is part of a larger exterior refresh, it helps to look at the full picture. Our main home page lays out all seven of our service lines, and the door work ties naturally into a larger Burbank service area project plan.

Sliding & Patio Doors Pricing in Burbank
Sliding and patio door replacement in Burbank generally falls between $1,800 and $6,500 installed, with most standard two-panel sliders in the $2,400 to $4,200 range. Custom sizes, multi-panel systems, and premium glass push toward the top of that range or beyond. Here’s a line-item look at what drives the number so you can budget with real figures instead of a vague “it depends.”
| Line Item | Typical Burbank Range |
|---|---|
| Standard two-panel vinyl slider (installed) | $1,800 – $3,200 |
| Fiberglass or wood-clad slider (installed) | $3,000 – $5,000 |
| Dual-pane low-E glass upgrade | $300 – $900 |
| Multi-panel or folding door system (installed) | $5,500 – $12,000+ |
| Rough opening adjustment or header work | $400 – $1,800 |
| Permit fees | $150 – $600 |
| Old door removal and disposal | $100 – $250 |
Several things move the price here in Burbank specifically. West-facing openings that take the harshest afternoon sun are worth upgrading to better glass, which adds cost but pays back on cooling bills. Older homes near the Rancho district and along the Eton Drive hillside sometimes have out-of-square openings that need framing correction before a new door will sit right. And if you’re going to a wider multi-panel system, the header work is real structural money, not a trim detail. We quote all of it upfront so there are no surprises mid-job.
To make the budget workable, we offer 0% financing for 18 months and $1,000 off projects over $10,000. Pair a door replacement with a kitchen refresh or a new patio and the discount applies to the combined project. Every estimate is free, and the pricing you get is the pricing you pay. Call (844) 797-7958 for an exact quote on your Burbank door.
FAQs – Sliding & Patio Doors
How much does a sliding door replacement cost in Burbank?
A standard two-panel sliding door replacement in Burbank typically costs $1,800 to $3,200 installed, and premium fiberglass or wood-clad units run $3,000 to $5,000. Custom multi-panel systems can exceed $12,000 once header work and permits are included. Call (844) 797-7958 for an exact quote; estimates are free.
Can you replace just the glass in my sliding door?
Sometimes, yes, but often a full door replacement is the better value. If the frame, track, and rollers are sound and only the insulated glass unit has fogged, replacing the glass can work. In Burbank’s heat, though, a failed seal usually comes with a tired frame and worn rollers, and rebuilding an aging door costs close to a new one. We’ll tell you honestly which makes sense for your door.
How long does a sliding or patio door install take?
Most standard sliding door replacements are completed in a single visit, usually a few hours from removal to final tune-up. Multi-panel systems, folding doors, and jobs that need framing or header correction take longer and may span more than one day. We give you a realistic timeline at the estimate, not a guess on install day.
Do I need a permit to replace a sliding door in Burbank?
In most cases, yes: Burbank requires permits for door replacements that alter the opening, and bedroom-adjacent patio doors have egress and safety-glazing requirements that must be met. We handle the permit paperwork and make sure the installation meets current code, so you’re not left sorting it out after the fact. Call (844) 797-7958 and we’ll walk you through what your specific project needs.
What’s the best sliding door for Burbank’s heat?
A dual-pane slider with low-E glass and argon fill handles Burbank’s summer heat best, especially on west-facing walls that take hours of direct afternoon sun. Fiberglass frames resist heat expansion better than vinyl and hold their shape over time. We match the glass and frame to your opening and sun exposure rather than pushing a single product.
Is it cheaper to repair or replace a sliding door?
A repair is cheaper when the problem is isolated, like a worn roller or a misaligned track, and those fixes run a fraction of replacement cost. Once the glass has fogged, the frame is warped, or the door won’t seal or latch, replacement wins on both cost and performance over the long run. We’ll diagnose it on the free estimate and tell you which path actually saves you money.
When you’re ready to stop fighting a door that sticks, fogs, or lets the heat in, we’re ready to help. Call (844) 797-7958 for a free estimate on sliding and patio doors in Burbank – we answer live 24/7, we quote upfront, and every install is backed by the 730-Day Done Right Promise. If the project is part of something bigger, from a kitchen remodel to a new patio, that same promise and that same standard of work carry through to the finish line.
Written by the team at Groundwork Construction Co. of Burbank, serving Burbank.


