







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in Burbank, CA: What You’re Actually Getting
Concrete driveways and concrete work in Burbank, CA typically run $4,500 – $12,000 for a full driveway pour, with most standard single-car and two-car jobs landing between $6,000 and $9,000. A straight replacement takes two to three working days from demo to cure; anything touching grading, drainage, or a new apron adds time. Call (844) 797-7958 for a free on-site estimate with line-item pricing.
How We Pour a Driveway in Burbank, Start to Cure

Concrete is unforgiving. You get one shot at the pour and the base work underneath determines whether the slab is still flat in fifteen years. Here’s how a typical Burbank job runs.
Stage 1: Site check and layout (day 1, half day)
We measure the existing drive, check slope and drainage away from the foundation, and confirm where the expansion joints and control cuts will land. You decide the finish, the width, and whether you’re adding an apron or widening the approach. Anything within a few feet of the property line gets flagged here for permit review.
Stage 2: Demo and haul-off (day 1, half day)
Old concrete gets broken, loaded, and hauled. For a 400-square-foot drive that’s usually one dumpster and a few hours with a breaker. If the existing slab sits over tree roots or failed subgrade, we find out now, not after the pour.
Stage 3: Base prep and grading (day 2)
This is the stage most homeowners never see and the one that matters most. We excavate to depth, compact the subgrade, and lay a compacted aggregate base. Drainage gets set here: slope away from the house, a swale or channel drain where the drive meets the garage, and a positive fall to the street. In Burbank’s dry basin you still get winter rain, and a drive that pools water at the garage door is a problem you’ll live with for years.
Stage 4: Forming, rebar, and inspection (day 2 – 3)
Forms go up, #3 or #4 rebar goes in on a grid, and the whole assembly gets checked before any mud shows up. If the job needs a permit, this is where the inspector signs off. You don’t need to be on site for this, but you should know the cost of the permit and inspection is baked into your estimate.
Stage 5: Pour, finish, and cure (day 3, plus cure time)
The pour itself is a few hours. Finish is your call: broom, exposed aggregate, or a stamped pattern if you want texture. Then it cures. You can walk on it in 24 hours, drive on it in about seven days, and it keeps gaining strength for a month. We set up barricades so nobody shortcuts that window.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Concrete Options Burbank Homeowners Actually Choose Between
Concrete is one material with a lot of dials. Here’s what moves the number and the lifespan.
- Standard broom finish: The default. Grippy, low-maintenance, hides dirt, and the cheapest finish to pour. Fits most driveways and is what you’ll see on the ranch homes in the hills and the flats near downtown.
- Exposed aggregate: Aggregate gets washed to the surface for texture and a bit of sparkle. Costs more than broom, hides tire marks better, and holds up well to Burbank’s summer sun. Slower to install because of the wash timing.
- Stamped or colored concrete: Pours like concrete, reads like stone or brick. Higher cost and a more involved finishing schedule, but it’s a good fit on Magnolia Park bungalows where a plain slab would look out of place next to 1930s architecture.
- Rebar vs. mesh: Rebar grid costs a little more and holds the slab together through ground movement. For a driveway that takes vehicle weight in a hot, dry basin with clay-heavy soil pockets, we pour rebar.
- Thickness: Four inches is standard for foot traffic and light cars. Five to six inches is worth it for trucks, RVs, or anything parked on the drive through Santa Ana heat cycles.
- Joint layout: Control joints aren’t cosmetic. Get them wrong and you get random cracking. This is a decision made on paper before the pour, not after.
What Concrete Driveways & Concrete Work Costs in Burbank, CA

Plan on $4,500 – $12,000 for concrete driveway work in Burbank. A straight replacement of an existing drive runs $5,000 – $14,000 depending on size and demo. Where you land inside those ranges depends on five things.
- Square footage: A single-car drive is roughly half the concrete of a two-car with a turnaround. This is the biggest lever.
- Demo and haul-off: Breaking and removing old concrete adds real labor and dumpster cost. A drive with no demo is significantly cheaper.
- Base and grading: Flat is cheap. Sloped, root-cracked, or poorly drained subgrade needs excavation and re-compaction, which adds days and dollars.
- Finish and thickness: Broom at four inches sits at the low end. Stamped, colored, or six-inch pours with rebar push toward the high end.
- Permits and drainage: Anything crossing a right-of-way or changing the approach to the street may require a permit and inspection. Channel drains and swales add material and labor.
A written estimate from us itemizes demo, base, rebar, pour, finish, and permit fees separately so you can see where the money goes. What it doesn’t include unless spelled out: driveway widening that triggers a zoning review, tree removal, or utility relocation if a line runs under the pour.
See the difference
Before
After
Before
After
Before
AfterWhy Burbank Is Different for Concrete Work
Burbank runs on a soundstage economy, and that shows up in the concrete work. A lot of jobs here are studio-adjacent: post-production office build-outs, soundstage-adjacent commercial remodels, and homes in the Rancho Equestrian and Magnolia Park areas where residents work in entertainment and expect permit-ready, camera-friendly results on tight turnaround. That means clean joints, consistent finish, and documentation that survives a review. The city’s aggressive building-safety and seismic retrofit enforcement adds a layer most of LA County doesn’t have. When we pour a drive in Burbank, we’re working on a stock that includes 1920s-40s Spanish Revival and Craftsman bungalows in Magnolia Park, 1950s-60s ranch homes in the hills, and mid-century apartment blocks along the major corridors. The older bungalows routinely hide unpermitted additions and converted garages, which surface the moment a remodel pulls a permit; a new drive often exposes a garage slab that was never poured to code. Up above the valley floor, the Verdugo foothills carry some of the tightest fire-clearance and hillside grading scrutiny in the region, so a hillside drive has to plan for both fire access and flash runoff from a winter storm. Covering all of Burbank, from the flats to the foothills.
Serving Burbank, CA – Our Local Coverage Area
We serve Burbank and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Concrete Driveways & Concrete Work in Burbank

Two to three working days from demo to finished pour, plus about seven days of cure before you drive on it. Larger drives, sloped lots, or jobs that need a permit and inspection push toward the upper end. Call (844) 797-7958 and we’ll give you a realistic schedule for your specific site, not a best-case guess.
It depends on scope. A like-for-like driveway replacement often doesn’t; anything touching the street approach, right-of-way, grading, or structural changes usually does. Burbank enforces building-safety rules aggressively, so we tell you up front whether your job needs a permit and what the inspection schedule looks like.
Usually, yes. Most driveway pours leave utilities undisturbed. The exceptions are lines running under the slab, an old gas or water line that should be relocated before the pour, and garage slabs tied into a structure. We walk the site, locate the utilities, and tell you before demo whether relocation is in the picture.
Concrete driveway installation in Burbank runs $4,500 – $12,000, and a full replacement lands at $5,000 – $14,000 once demo and haul-off are factored in. The price is set by square footage, base condition, finish, thickness, and permit scope. Call (844) 797-7958 for an exact quote; estimates are free.
Every project is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. Concrete is a long-horizon material, so the warranty matters. Our technicians have up to 12 years of experience on pours like this, and every pro is background-checked and licensed and insured as California requires.
Get a Free Concrete Estimate in Burbank
Call (844) 797-7958 to schedule a free on-site estimate for concrete driveways & concrete work in Burbank. We’ll walk the site, check drainage and base, and hand you a written line-item quote with no change-order surprises. If you’re planning the wider project, homeowners often pair this with Driveway & Pavers in Burbank or a Door Installation in Burbank on a new garage. Calls are answered by a live person, 24/7.
Written by the team at Groundwork Construction Co.












